{"product_id":"seastar-xtreme-ccx17916-16-ft-control-cable-mercury-600a-style-direct-replacement-for-mercury-mercruiser-mariner-force-engines","title":"SeaStar CCX17916 XTREME Control Cable, 16 Feet, Mercury 600A Style Replacement for Mercury\/MerCruiser\/Mariner\/Force Engines","description":"\u003cp\u003eThe SeaStar CCX17916 is a 16-foot XTREME control cable engineered as a drop-in replacement for the Mercury 600A style control cable, built to fit the existing connection components on compatible engine control heads without modification. It is designed for Mercury, MerCruiser, Mariner, and most Force engines using Mercury or Quicksilver controls, and is well suited to complex routing or long cable runs where a smoother feel and tighter turns are needed.\u003c\/p\u003e\u003cp\u003eAt the core of the cable is a patented XTREME splined core: ridges on the core create a close fit with the cable's inner HDPE liner, allowing smooth movement with minimal lost motion. The cable carries a 4-inch minimum bend radius, compared with an 8-inch minimum bend radius on standard control cables, making it a better fit for tight engine compartments and performance or bass boat layouts. The outer jacket is a 0.34-inch super tough HDPE that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil. Internally, 0.033-inch oil tempered lay wires provide strength and performance, while stainless steel terminals and brass fittings add corrosion protection at the connection points. The liner is ultra smooth and lubricated for life at the factory, so no additional lubrication is required at installation.\u003c\/p\u003e\u003cp\u003eThe CCX17916 is manufactured in the U.S.A. And is designed to fit Mariner\/Mercury\/MerCruiser engines (1965-date) with Mercury controls and Force engines (1993-date) with Force\/US Marine\/Mercury controls.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX17916\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 16 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.43 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e 0.34-inch Super Tough HDPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches (XTREME) vs. 8 inches (standard cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay Wires:\u003c\/strong\u003e 0.033-inch oil tempered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Stainless steel terminals with brass fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore:\u003c\/strong\u003e XTREME splined, coated core element\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiner:\u003c\/strong\u003e HDPE, factory lubricated for life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282272234\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMariner\/Mercury\/MerCruiser engines (1965-date) with Mercury controls\u003c\/li\u003e\n\u003cli\u003eForce engines (1993-date) with Force\/US Marine\/Mercury controls\u003c\/li\u003e\n\u003cli\u003eAll Mariner engines with Mercury\/Mariner controls, except pre-1993 40 HP and lower models\u003c\/li\u003e\n\u003cli\u003eSeaStar Osprey and SL-3 Series controls to Mercury, MerCruiser, Mariner, and most Force engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 600A style control cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the length of the SeaStar CCX17916 control cable?\u003c\/strong\u003e The CCX17916 is a 16-foot control cable, part of SeaStar's XTREME control cable line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich engines and controls is the CCX17916 designed to fit?\u003c\/strong\u003e It fits Mariner\/Mercury\/MerCruiser engines (1965-date) with Mercury controls, and Force engines (1993-date) with Force\/US Marine\/Mercury controls; it also fits SeaStar Osprey and SL-3 Series controls to Mercury, MerCruiser, Mariner, and most Force engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX17916 fit pre-1993 Mariner engines under 40 HP?\u003c\/strong\u003e No. The CCX17916 is designed for Mariner engines with Mercury\/Mariner controls except pre-1993 models of 40 HP and lower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX17916 a direct replacement for the stock Mercury cable?\u003c\/strong\u003e Yes, the CCX17916 is engineered as a drop-in replacement for the Mercury 600A style control cable and uses the existing connection components, so no modification is needed at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the XTREME cable different from a standard control cable?\u003c\/strong\u003e The XTREME technology used in the CCX17916 gives it a 4-inch minimum bend radius, compared with an 8-inch minimum bend radius on standard control cables, which allows tighter routing in the engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e The CCX17916 has a 0.34-inch super tough HDPE outer jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to lubricate the cable before installing it?\u003c\/strong\u003e No, the CCX17916's HDPE liner is lubricated for life at the factory, so no additional lubrication is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CCX17916 weigh?\u003c\/strong\u003e The CCX17916 weighs 2.43 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminals and fittings made of?\u003c\/strong\u003e The CCX17916 uses stainless steel terminals with brass fittings for corrosion protection at the connection points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the SeaStar CCX17916 manufactured?\u003c\/strong\u003e The CCX17916 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX17916 suitable for performance or bass boats with long cable runs?\u003c\/strong\u003e Yes, the CCX17916's tighter 4-inch bend radius and splined core design make it well suited for complex or long cable runs, such as those found on performance and bass boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat core technology does the CCX17916 use?\u003c\/strong\u003e The CCX17916 uses SeaStar's XTREME splined, coated core element, which creates a close fit with the inner liner for smooth movement with minimal lost motion.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989299474651,"sku":"TEL-CCX17916","price":62.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41qFZOgq8gL_d9d8df31-2552-467f-a5b1-8d71fbbf9a66.jpg?v=1784475254","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-xtreme-ccx17916-16-ft-control-cable-mercury-600a-style-direct-replacement-for-mercury-mercruiser-mariner-force-engines","provider":"Good Vibes Marina","version":"1.0","type":"link"}