{"product_id":"seastar-xtreme-ccx17925-control-cable-25-ft-mercury-600a-type-replacement-for-mercury-mercruiser-mariner-and-force-engines","title":"SeaStar CCX17925 XTREME Control Cable, 25 Feet, Mercury 600A Type Replacement for Mercury\/Mariner\/MerCruiser\/Force","description":"\u003cp\u003eThe SeaStar CCX17925 is a 25-foot XTREME control cable engineered as a drop-in replacement for the Mercury 600A style control cable, using the boat's existing connection components. It is built for Mercury, MerCruiser, Mariner, and most Force outboard and sterndrive engines running Mercury controls, and is also compatible with SeaStar Osprey and SL-3 Series controls. The XTREME line is designed for complex or long cable runs, or simply for a smoother throttle and shift feel, and is a common upgrade on performance and bass boats.\u003c\/p\u003e\u003cp\u003eAt the core of the CCX17925 is SeaStar's patented splined core: ridges on the core create a close fit with the cable's inner liner, allowing smooth movement with minimal lost motion. The cable carries 0.033-inch oil tempered lay wires for strength, stainless or nylon covered core wires with moisture-protective seals, and stainless steel terminals with brass fittings for corrosion resistance. A 0.34-inch super tough HDPE jacket resists abrasion and withstands UV, salt water, chemicals, gasoline, and oil, and the cable is lubricated for life at the factory so no re-greasing is needed at install. Its XTREME construction gives it a 4-inch minimum bend radius, versus an 8-inch minimum for standard control cables, making it easier to route through tight or long engine bay runs.\u003c\/p\u003e\u003cp\u003eThe CCX17925 fits Mercury, Mariner, and MerCruiser engines from 1965-date and Force engines from 1993-date when used with Mercury controls, and fits Mariner engines with Mercury\/Mariner controls except pre-1993 models of 40 HP and under. Confirm cable length against your existing control cable before ordering, since length must match the application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX17925\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.37 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Material:\u003c\/strong\u003e HDPE (high-density polyethylene)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Thickness:\u003c\/strong\u003e 0.34 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay Wire Diameter:\u003c\/strong\u003e 0.033 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e XTREME splined, coated core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Material:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Gender:\u003c\/strong\u003e Male-to-Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282272326\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury, Mariner, and MerCruiser engines, 1965-date, with Mercury controls\u003c\/li\u003e\n\u003cli\u003eForce engines, 1993-date, with Force\/US Marine\/Mercury controls\u003c\/li\u003e\n\u003cli\u003eMariner engines with Mercury\/Mariner controls, except pre-1993 models of 40 HP and lower\u003c\/li\u003e\n\u003cli\u003eSeaStar Osprey and SL-3 Series controls to Mercury, MerCruiser, Mariner, and most Force engines\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury 600A style control cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow long is the SeaStar CCX17925 control cable?\u003c\/strong\u003e The CCX17925 measures 25 feet, which matches the length code in its part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat engines and controls does the CCX17925 fit?\u003c\/strong\u003e This cable fits Mercury, Mariner, and MerCruiser engines from 1965-date and Force engines from 1993-date, when those engines use Mercury controls; it also fits SeaStar Osprey and SL-3 Series controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX17925 a direct replacement for the Mercury 600A cable?\u003c\/strong\u003e Yes, the CCX17925 is engineered as a drop-in replacement for the Mercury 600A style control cable and connects using the boat's existing connection components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the XTREME cable different from a standard control cable?\u003c\/strong\u003e A 4-inch minimum bend radius, compared with an 8-inch minimum on standard control cables, lets the CCX17925 handle tighter, longer, or more complex cable runs and gives a smoother shift and throttle feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX17925 fit Mariner engines under 40 HP?\u003c\/strong\u003e Not on pre-1993 models: the CCX17925 fits Mariner engines with Mercury\/Mariner controls except for pre-1993 models of 40 HP and lower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CCX17925's jacket made of?\u003c\/strong\u003e A 0.34-inch super tough HDPE (high-density polyethylene) jacket covers the CCX17925, resisting abrasion and withstanding UV, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat connector type does the CCX17925 use?\u003c\/strong\u003e The CCX17925 has a male-to-male connector configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CCX17925 weigh?\u003c\/strong\u003e The CCX17925 control cable weighs 3.37 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX17925 need to be greased before installation?\u003c\/strong\u003e No, the CCX17925 is lubricated for life at the factory, so no additional greasing is needed at install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is inside the core of the CCX17925?\u003c\/strong\u003e It uses SeaStar's XTREME splined, coated core with 0.033-inch oil tempered lay wires and stainless or nylon covered core wires with moisture-protective seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CCX17925 manufactured?\u003c\/strong\u003e The CCX17925 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CCX17925 be used with Osprey or SL-3 Series controls?\u003c\/strong\u003e Yes, the CCX17925 is compatible with SeaStar Osprey and SL-3 Series controls connecting to Mercury, MerCruiser, Mariner, and most Force engines.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989301899483,"sku":"TEL-CCX17925","price":74.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61kKRlg6j0L.jpg?v=1784475351","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-xtreme-ccx17925-control-cable-25-ft-mercury-600a-type-replacement-for-mercury-mercruiser-mariner-and-force-engines","provider":"Good Vibes Marina","version":"1.0","type":"link"}