{"product_id":"seastar-xtreme-ccx17932-control-cable-32-ft-mercury-600a-style-replacement-for-mercury-mariner-force-with-mercury-controls","title":"SeaStar CCX17932 Xtreme Control Cable, 32 Feet, Mercury\/MerCruiser\/Mariner\/Force Replacement","description":"\u003cp\u003eThe SeaStar CCX17932 is a 32-foot Xtreme control cable engineered as a drop-in replacement for the Mercury 600A style control cable, using the existing connection components on the engine and control head. It is built for Mercury, MerCruiser, Mariner, and most Force engines running Mercury, MerCruiser, Mariner, Force, or Quicksilver controls. The cable's XTREME Technology core uses a patented splined design so the ridges on the core keep a close fit with the cable's inner liner, allowing smooth movement with minimal lost motion, even on complex or long cable runs.\u003c\/p\u003e\u003cp\u003eConstruction includes a 0.34-inch super tough HDPE jacket that resists abrasion and stands up to UV, salt water, chemicals, gasoline, and oil, along with 0.033-inch oil tempered lay wires for strength and performance. Stainless steel terminals and brass fittings add corrosion protection, and the core wires carry moisture protective seals for added corrosion resistance and longer service life. The cable is lubricated for life at the factory and is Made in the U.S.A. Its 4-inch minimum bend radius (versus an 8-inch minimum bend radius on standard control cables) makes it well suited to tight or complex routing.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX17932\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 32 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Material:\u003c\/strong\u003e High-Density Polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Thickness:\u003c\/strong\u003e 0.34 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire Diameter:\u003c\/strong\u003e 0.033 inch, oil tempered lay wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Material:\u003c\/strong\u003e Stainless steel terminals with brass fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Technology:\u003c\/strong\u003e XTREME splined, coated core element\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Controls:\u003c\/strong\u003e Mercury, MerCruiser, Mariner, Force, Quicksilver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread End Compatibility:\u003c\/strong\u003e 10-32 threaded ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282272388\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury, MerCruiser, and Mariner (1965-date) using Mercury controls\u003c\/li\u003e\n\u003cli\u003eForce (1993-date) using Mercury controls\u003c\/li\u003e\n\u003cli\u003eAll 1993-date Force (US Marine) with Force\/US Marine\/Mercury controls\u003c\/li\u003e\n\u003cli\u003eMariner engines with Mercury\/Mariner controls, except pre-1993, 40 HP and lower models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CCX17932 control cable used for?\u003c\/strong\u003e The CCX17932 is a 32-foot marine control cable that operates the throttle or shift linkage between the control head and the engine on Mercury, MerCruiser, Mariner, and most Force engines using Mercury, MerCruiser, Mariner, Force, or Quicksilver controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich engines and controls does the CCX17932 fit?\u003c\/strong\u003e It fits Mercury, MerCruiser, and Mariner engines (1965-date) with Mercury controls, Force engines (1993-date) with Mercury controls, all 1993-date Force (US Marine) engines with Force\/US Marine\/Mercury controls, and Mariner engines with Mercury\/Mariner controls except pre-1993, 40 HP and lower models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct replacement for the Mercury 600A style cable?\u003c\/strong\u003e Yes, the CCX17932 is engineered as a drop-in replacement for the Mercury 600A style control cable and uses the existing connection components already on the boat, so no additional hardware is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CCX17932 cable?\u003c\/strong\u003e 32 feet, as indicated by the CCX17932 part number and product name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius of this cable?\u003c\/strong\u003e 4 inches. That is half the 8-inch minimum bend radius of a standard control cable, which makes the CCX17932 easier to route through tight or complex cable runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes the XTREME cable different from a standard control cable?\u003c\/strong\u003e The CCX17932 uses SeaStar's XTREME Technology, a patented splined core whose ridges keep a close fit with the cable's inner liner for smoother movement with less lost motion, plus a tighter 4-inch minimum bend radius versus 8 inches on a standard cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable jacket made of?\u003c\/strong\u003e The CCX17932 has a 0.34-inch super tough High-Density Polyethylene (HDPE) jacket that resists abrasion and withstands UV, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX17932 fit Force outboard engines?\u003c\/strong\u003e Yes, it fits Force engines (1993-date) with Mercury controls, including all 1993-date Force (US Marine) engines with Force\/US Marine\/Mercury controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX17932 pre-lubricated for installation?\u003c\/strong\u003e Yes, the cable is lubricated for life at the factory, so it does not require additional greasing before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the internal core wires made of?\u003c\/strong\u003e The CCX17932 uses 0.033-inch oil tempered lay wires along with stainless steel terminals and brass fittings, and the core wires carry moisture protective seals for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CCX17932 control cable manufactured?\u003c\/strong\u003e The SeaStar CCX17932 control cable is Made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX17932 fit Mariner engines with Mariner controls?\u003c\/strong\u003e It fits Mariner engines using Mercury\/Mariner controls, with the exception of pre-1993 Mariner models rated 40 HP and lower, which are not covered by the CCX17932.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989302948059,"sku":"TEL-CCX17932","price":101.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71liIdATPkL_bada65a7-2c55-49f9-8afd-fe9c6e6c7f7f.jpg?v=1784475392","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-xtreme-ccx17932-control-cable-32-ft-mercury-600a-style-replacement-for-mercury-mariner-force-with-mercury-controls","provider":"Good Vibes Marina","version":"1.0","type":"link"}