{"product_id":"seastar-xtreme-ccx20510-control-cable-10-ft-fits-mercury-1965-date-force-1993-date-aftermarket-controls-mercury-style-engine-end","title":"SeaStar CCX20510 TFXtreme Control Cable, 10 Feet, for BRP\/OMC\/Evinrude\/Johnson Engine Controls","description":"\u003cp\u003eThe SeaStar CCX20510 is a 10-foot XTREME control cable assembly built as a drop-in replacement for original equipment BRP\/OMC\/Johnson\/Evinrude\/Gale outboard control cables. It uses the existing connection components on the boat, so no modification to the control head or engine end is required during installation. The cable is built around SeaStar's patented Splined Core, where ridges on the core provide a close fit with the cable's inner liner for smooth movement and minimal lost motion at the helm.\u003c\/p\u003e\u003cp\u003eThis XTREME cable has a 4 inch minimum bend radius, compared to an 8 inch minimum bend radius on standard control cables, making it well suited to complex or long cable runs and to foot throttle applications on performance and bass boats. The outer jacket is a 0.34 inch thick, super tough HDPE material that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil. Inside, 0.033 inch oil-tempered lay wires provide strength, and the core wires carry moisture-protective seals with a stainless steel or nylon covering for corrosion resistance. Stainless steel terminals and brass fittings are used at the connection points for further corrosion protection. The cable is lubricated for life at the factory and is made in the U.S.A.\u003c\/p\u003e\u003cp\u003eThe CCX20510 fits BRP\/OMC\/Johnson\/Evinrude\/Gale outboards that use BRP\/OMC style engine controls. Buyers should verify the correct cable length for their application before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX20510\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Control cable assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket Material:\u003c\/strong\u003e HDPE (High-Density Polyethylene), 0.34 inch thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e 0.033 inch oil-tempered lay wires; stainless steel or nylon-covered core wires with moisture-protective seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches (XTREME technology)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\/Fittings:\u003c\/strong\u003e Stainless steel terminals, brass fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.73 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Controls:\u003c\/strong\u003e BRP\/OMC style controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282272968\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBRP\/OMC\/Johnson\/Evinrude\/Gale outboards using BRP\/OMC engine controls\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDirect drop-in replacement using existing OEM connection components; specific OEM cross-reference numbers are not published for this cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CCX20510 used for?\u003c\/strong\u003e The CCX20510 is a 10-foot control cable assembly used to connect a boat's helm controls to the outboard engine's throttle or shift linkage, replacing the original equipment cable on BRP\/OMC\/Johnson\/Evinrude\/Gale outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CCX20510 control cable?\u003c\/strong\u003e The CCX20510 measures 10 feet, and buyers should verify this is the correct length for their control run before ordering, since control cables are not field-adjustable in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CCX20510 fit Mercury or Volvo engine controls?\u003c\/strong\u003e No. The CCX20510 is built for BRP\/OMC\/Johnson\/Evinrude\/Gale outboards using BRP\/OMC style engine controls; Mercury and Volvo control systems use different SeaStar cable part numbers with different engine-end connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius of the CCX20510?\u003c\/strong\u003e The CCX20510 uses SeaStar's XTREME cable technology, which has a 4 inch minimum bend radius, compared to an 8 inch minimum bend radius for standard control cables, making it suitable for tight or complex cable routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the CCX20510 jacket made of?\u003c\/strong\u003e The outer jacket on the CCX20510 is a 0.34 inch thick, super tough HDPE (High-Density Polyethylene) material designed to resist abrasion and withstand UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to replace any other components to install the CCX20510?\u003c\/strong\u003e No. The CCX20510 is a drop-in replacement engineered to use the existing OEM connection components at both the control head and engine end, so no additional hardware is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX20510 pre-lubricated?\u003c\/strong\u003e Yes, the CCX20510 is lubricated at the factory for life, and the HDPE liner is designed to stay ultra smooth without additional maintenance lubrication.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the CCX20510 control cable?\u003c\/strong\u003e The SeaStar CCX20510 weighs 1.73 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX20510 suitable for foot throttle applications?\u003c\/strong\u003e Yes, the tight 4 inch bend radius of the CCX20510 XTREME cable makes it well suited for foot throttle setups on performance and bass boats, as well as for long or complex cable runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CCX20510 manufactured?\u003c\/strong\u003e The SeaStar CCX20510 control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CCX20510 cable?\u003c\/strong\u003e The CCX20510 has a black outer jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX20510 come with corrosion protection?\u003c\/strong\u003e Yes, the CCX20510 uses stainless steel terminals and brass fittings, along with moisture-protective seals on the core wires, to resist corrosion in marine environments.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989311566043,"sku":"TEL-CCX20510","price":90.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71Xy7l1D0oL_aeed21ca-da6f-4f70-b689-705733de3f7a.jpg?v=1784475676","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-xtreme-ccx20510-control-cable-10-ft-fits-mercury-1965-date-force-1993-date-aftermarket-controls-mercury-style-engine-end","provider":"Good Vibes Marina","version":"1.0","type":"link"}