{"product_id":"seastar-xtreme-ccx21418-control-cable-18-ft-for-omc-turbo-jet-volvo-penta-engines-with-brp-omc-side-mount-controls","title":"SeaStar CCX21418 Control Cable, 18-Foot XTREME Cable for OMC-Volvo Penta Side Mount Controls","description":"\u003cp\u003eThe SeaStar CCX21418 is an 18-foot XTREME control cable engineered as a drop-in replacement for OMC snap-in type control cables used on Volvo Penta engines fitted with OMC\/BRP side mount controls. It uses the existing connection components at both ends, so installation does not require modifying the control head or engine-side hardware. The cable is built around SeaStar's patented splined core, where ridges on the core create a close fit with the cable's inner liner, allowing smooth movement with minimal lost motion at the helm.\u003c\/p\u003e\u003cp\u003eXTREME technology gives this cable a 4-inch minimum bend radius, compared to an 8-inch minimum bend radius on standard control cables, which makes it well suited to foot throttle applications on performance and bass boats, as well as complex or long cable runs where routing space is tight. The cable jacket is 0.34-inch Super Tough HDPE that resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil. Core wires are 0.033-inch oil tempered lay wires for strength, paired with stainless steel terminals and brass fittings for added corrosion resistance. The liner is lubricated for life at the factory, and the core wires carry moisture-protective seals for long-term corrosion protection.\u003c\/p\u003e\u003cp\u003eThis cable is intended for Volvo Penta engines using OMC\/BRP side mount controls that accept the OMC snap-in type cable connection. It is manufactured in the U.S.A. And is designed to meet marine control cable duty on both foot throttle and side mount console applications.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX21418\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 17 x 1.5 x 17 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 17.4 x 16.7 x 1.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches (versus 8 inches for standard cables)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket:\u003c\/strong\u003e 0.34 inch Super Tough HDPE jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire:\u003c\/strong\u003e 0.033 inch oil tempered lay wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals\/Fittings:\u003c\/strong\u003e Stainless steel terminals and brass fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Type:\u003c\/strong\u003e OMC snap-in type, side mount control connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282273439\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVolvo Penta engines using OMC\/BRP side mount controls that accept the OMC snap-in type cable\u003c\/li\u003e\n\u003cli\u003eOMC Turbo Jet applications with OMC side mount controls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CCX21418 control cable used for?\u003c\/strong\u003e The CCX21418 is an 18-foot control cable used on Volvo Penta engines equipped with OMC\/BRP side mount controls, serving as a drop-in replacement for the original equipment snap-in type control cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this cable work with my existing control head?\u003c\/strong\u003e Yes, the CCX21418 uses the existing connection components at the control head and engine end, since it is engineered as a direct replacement for the OMC snap-in type cable already in place on side mount control setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CCX21418 control cable?\u003c\/strong\u003e This cable measures 18 feet in length, matching the length needed for the specific run it is designed to replace on OMC\/BRP side mount control installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes an XTREME cable different from a standard control cable?\u003c\/strong\u003e A minimum bend radius of 4 inches on the CCX21418 allows tighter routing than a standard control cable's 8-inch minimum bend radius, which matters on boats with complex or long cable runs and for foot throttle setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the outer jacket made of?\u003c\/strong\u003e The CCX21418 has a 0.34 inch Super Tough HDPE jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the cable come pre-lubricated?\u003c\/strong\u003e Yes, the liner on the CCX21418 is lubricated for life at the factory, so no additional lubrication is required during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the terminals and fittings made of?\u003c\/strong\u003e Stainless steel terminals and brass fittings are used on the CCX21418 for added corrosion resistance in the marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cable suitable for foot throttle applications?\u003c\/strong\u003e Yes, the tight 4-inch minimum bend radius on the CCX21418 makes it well suited to foot throttle applications on performance and bass boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CCX21418 manufactured?\u003c\/strong\u003e This control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order this cable?\u003c\/strong\u003e Ordering the CCX21418 includes one complete 18-foot control cable assembly with terminals and fittings attached, ready to connect using existing connection components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the cable housing?\u003c\/strong\u003e The CCX21418 has a black cable jacket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CCX21418 weigh?\u003c\/strong\u003e The CCX21418 control cable weighs 2.45 pounds.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989329195227,"sku":"TEL-CCX21418","price":81.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/31Th6jkHg8L_31e4844d-216b-495d-ae84-5684560316f7.jpg?v=1784476003","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-xtreme-ccx21418-control-cable-18-ft-for-omc-turbo-jet-volvo-penta-engines-with-brp-omc-side-mount-controls","provider":"Good Vibes Marina","version":"1.0","type":"link"}