{"product_id":"seastar-xtreme-ccx63018-control-cable-18-ft-mercury-3600-630-mariner-outboards-10-32-control-end-mercury-engine-end","title":"SeaStar CCX63018 Xtreme Control Cable, 18 Feet, 3600 Mercury Type, 10-32 Threaded End","description":"\u003cp\u003eThe SeaStar CCX63018 is an Xtreme Control Cable built for foot throttle applications on performance and bass boats, and for complex or long cable runs where a superior feel is required. It is designed for controls which accept a cable with 10-32 threaded ends or for use with most aftermarket controls, and terminates in a Mercury type engine end connection. Because the control end already has a 10-32 threaded terminal, the CA27319 connection kit is not required for installation.\u003c\/p\u003e\u003cp\u003eSeaStar's XTREME Technology uses a patented splined core: ridges on the core give a close fit with the cable's inner liner for easy movement with minimal lost motion. The cable is built with a 0.34 inch super tough HDPE jacket that resists abrasion and withstands UV, salt water, chemicals, gasoline, and oil, along with 0.033 inch oil tempered lay wires for strength and performance. The liner is a long wearing HDPE liner that is ultra smooth and lubricated for life, and the core wires are stainless or nylon covered with moisture protective seals for added corrosion protection. The XTREME cable's minimum bend radius is 4 inches, versus 8 inches for a standard cable, making it well suited to tight or complex routing.\u003c\/p\u003e\u003cp\u003eThis cable is made in the U.S.A., exceeds ABYC safety standards, and is type certified to ISO\/IMCI and NMMA requirements. It is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX63018\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl End Connection:\u003c\/strong\u003e 10-32 threaded terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine End Connection:\u003c\/strong\u003e Mercury type engine end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Kit Requirement:\u003c\/strong\u003e CA27319 kit not required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches (8 inches for a standard cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e 0.34 inch super tough HDPE jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay Wires:\u003c\/strong\u003e 0.033 inch oil tempered lay wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore:\u003c\/strong\u003e XTREME splined, coated core element\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiner:\u003c\/strong\u003e Long wearing HDPE liner, lubricated for life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Wire Covering:\u003c\/strong\u003e Stainless or nylon covered with moisture protective seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.53 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Exceeds ABYC safety standards; type certified to ISO\/IMCI and NMMA requirements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282274627\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMercury products (1965-date) using controls which accept 10-32 threaded ends or using most aftermarket controls, with Mercury style engine end connection\u003c\/li\u003e\n\u003cli\u003eForce products (1993-date) using controls which accept 10-32 threaded ends or using most aftermarket controls, with Mercury style engine end connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNo specific OEM part numbers listed; fits applications described above\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CCX63018 used for?\u003c\/strong\u003e The CCX63018 is an 18 foot Xtreme control cable intended for foot throttle applications on performance and bass boats and for complex or long cable runs, connecting to a Mercury type engine end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX63018 require the CA27319 connection kit?\u003c\/strong\u003e No, the CA27319 kit is not required for the CCX63018 because it already has a 10-32 threaded terminal at the control end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat length is this control cable?\u003c\/strong\u003e This is the 18 foot version of the CCX630XX Xtreme control cable line, part number CCX63018.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat boats and controls is the CCX63018 compatible with?\u003c\/strong\u003e It fits controls that accept a cable with 10-32 threaded ends, or most aftermarket controls, and terminates in a Mercury type engine end connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich engines does the CCX63018 fit?\u003c\/strong\u003e The CCX63018 fits Mercury products (1965-date) and Force products (1993-date) that use controls accepting 10-32 threaded ends or most aftermarket controls, with a Mercury style engine end connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes an Xtreme cable different from a standard control cable?\u003c\/strong\u003e The XTREME Control Cable used in the CCX63018 has a 4 inch minimum bend radius compared to an 8 inch minimum bend radius for a standard cable, allowing tighter and more complex routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the cable jacket made of?\u003c\/strong\u003e The CCX63018 has a 0.34 inch super tough HDPE jacket that resists abrasion and withstands UV, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CCX63018 weigh?\u003c\/strong\u003e The CCX63018 control cable weighs 2.53 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX63018 made in the USA?\u003c\/strong\u003e Yes, the CCX63018 Xtreme control cable is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the CCX63018?\u003c\/strong\u003e The CCX63018 is backed by a two-year recreational user warranty against manufacturing defects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX63018 meet marine safety standards?\u003c\/strong\u003e Yes, the CCX63018 exceeds ABYC safety standards and is type certified to ISO\/IMCI and NMMA requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CCX63018 cable?\u003c\/strong\u003e The CCX63018 control cable is black.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989338173659,"sku":"TEL-CCX63018","price":107.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71pwrlHhxuL_92d787b5-3fa3-4fd9-a6c4-b2af15a14204.jpg?v=1784476312","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-xtreme-ccx63018-control-cable-18-ft-mercury-3600-630-mariner-outboards-10-32-control-end-mercury-engine-end","provider":"Good Vibes Marina","version":"1.0","type":"link"}