{"product_id":"seastar-xtreme-ccx63318-control-cable-18-ft-3300-33c-universal-10-32-throttle-shift-cable","title":"SeaStar CCX63318 Xtreme 3300 Control Cable, 18 Feet, 10-32 Threaded Terminal Ends","description":"\u003cp\u003eThe SeaStar CCX63318 is an 18-foot Xtreme 3300 series control cable built for boat engine controls that accept universal 10-32 threaded cable ends. It is designed to fit aftermarket engine controls as well as Original Equipment Manufacturer units, making it a versatile choice for repowers, cable replacements, and complex or long cable runs where a standard cable will not do the job.\u003c\/p\u003e\u003cp\u003eAt the core of the cable is a patented splined core element: ridges on the core create a close fit with the cable's inner liner, giving smooth, low-lost-motion movement at both the helm and the engine. The cable is protected by a 0.34 inch Super Tough HDPE jacket that resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil, while 0.033 inch oil tempered lay wires provide superior strength and performance. Stainless steel terminals and conduit fittings add corrosion protection at both ends.\u003c\/p\u003e\u003cp\u003eA key advantage of the Xtreme design is its 4 inch minimum bend radius, compared to an 8 inch minimum bend radius on standard control cables, which makes it well suited to foot throttle applications on performance and bass boats as well as installations with tight or complex routing. The cable is lifetime lubricated at the factory, so it arrives ready to install and run smoothly for the life of the cable. It is manufactured in the U.S.A. And finished in black.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaStar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CCX63318\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 18 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e 3300 TFXtreme\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Type:\u003c\/strong\u003e 10-32 threaded terminal with clamp-type fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacket:\u003c\/strong\u003e 0.34 inch Super Tough HDPE jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLay Wire:\u003c\/strong\u003e 0.033 inch oil tempered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore:\u003c\/strong\u003e Splined XTREME core element\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.36 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 17.36 x 16.97 x 1.34 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282271596\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Two-year recreational user warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits engine controls that accept universal 10-32 threaded cable ends, including aftermarket controls and OEM units. Compatible with BMW, Chrysler, Honda, Nissan, Suzuki, Volvo, Yamaha, Tohatsu, and many inboard engine applications; also fits Evinrude, Johnson, OMC, and Mercury engines when used with the correct engine adapter kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the SeaStar CCX63318 control cable used for?\u003c\/strong\u003e The CCX63318 is an 18-foot SeaStar Xtreme 3300 series control cable that connects a boat's engine control (throttle or shift) to the engine, and it works with controls that accept universal 10-32 threaded cable ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the CCX63318 cable?\u003c\/strong\u003e This cable measures 18 feet, matching the length designation in its part number, CCX63318.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the minimum bend radius of the CCX63318?\u003c\/strong\u003e The CCX63318 has a 4 inch minimum bend radius, compared to an 8 inch minimum bend radius on standard control cables, which allows for tighter, more complex routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CCX63318 fit outboard engines like Mercury, Evinrude, or Johnson?\u003c\/strong\u003e Yes, the CCX63318 fits Evinrude, Johnson, OMC, and Mercury engines when used with the correct engine adapter kit, in addition to controls that accept universal 10-32 threaded cable ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX63318 an OEM or aftermarket cable?\u003c\/strong\u003e The CCX63318 is designed to fit aftermarket engine controls as well as Original Equipment Manufacturer units, so it works as a direct replacement across both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat terminal type does the CCX63318 use?\u003c\/strong\u003e It uses a 10-32 threaded terminal with a clamp-type fitting at each end, and it works with the existing connection components on compatible controls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CCX63318 cable jacket made of?\u003c\/strong\u003e The jacket is a 0.34 inch Super Tough HDPE material that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CCX63318 come pre-lubricated?\u003c\/strong\u003e Yes, the CCX63318 is lifetime lubricated at the factory, so it does not require additional lubrication before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the CCX63318 weigh?\u003c\/strong\u003e The SeaStar CCX63318 control cable weighs 2.36 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CCX63318 suitable for foot throttle applications?\u003c\/strong\u003e Yes, the tighter 4 inch bend radius of the CCX63318 makes it well suited to foot throttle applications on performance and bass boats as well as long or complex cable runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the CCX63318 manufactured?\u003c\/strong\u003e The CCX63318 is made in the U.S.A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CCX63318 cable?\u003c\/strong\u003e The CCX63318 is finished in black.\u003c\/p\u003e","brand":"SeaStar","offers":[{"title":"Default Title","offer_id":48989340467419,"sku":"TEL-CCX63318","price":62.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61zeNdyJijL.jpg?v=1784476469","url":"https:\/\/www.goodvibesmarina.com\/products\/seastar-xtreme-ccx63318-control-cable-18-ft-3300-33c-universal-10-32-throttle-shift-cable","provider":"Good Vibes Marina","version":"1.0","type":"link"}