{"product_id":"shurflo-700-gph-12v-submersible-marine-bilge-pump-355-110-10","title":"Shurflo 700 GPH 12V Submersible Marine Bilge Pump - 355-110-10","description":"\u003cp\u003eThe Shurflo 355-110-10 is a 700 GPH submersible bilge pump built for continuous-duty water removal in the harsh marine environment. Designed for below-waterline installation, it uses an anti-airlock design to maintain prime and keep water moving even as bilge levels drop, so the bilge stays dry when it matters most. A water-cooled motor extends the working life of the pump under sustained operation, while the nylon housing resists the corrosion and impact that marine bilges dish out over time. Stainless steel hardware adds further corrosion resistance to the fasteners.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward thanks to a quick-disconnect base plate that lets the pump be removed for cleaning or service without disturbing the wiring or mounting. The pump comes standard with a 3 foot tinned wire assembly suited for above-waterline wiring connections. It operates on a 12 VDC system, draws up to 3.2 amps, and is rated for a 5 amp fuse. The pump is ignition protected, ISO 8846 approved, and CE listed, and it is backed by a three year manufacturer's warranty. With a 3\/4 inch outlet port and a compact round footprint, the Shurflo 355-110-10 fits into standard bilge pump mounting locations aboard boats that need higher-capacity water removal than an entry-level pump provides.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 355-110-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bilge Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 700 GPH (2650 LPH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Draw (Max):\u003c\/strong\u003e 3.2 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Rating:\u003c\/strong\u003e 5 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.25 inches x 3.75 inches, round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoot Print:\u003c\/strong\u003e 2-3\/8 inches (86 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Size (Outlet):\u003c\/strong\u003e 3\/4 inch (19 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Cycle:\u003c\/strong\u003e Continuous duty, submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e 3 foot tinned wire assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.0625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Ignition protected, ISO 8846 approved, CE listed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year manufacturer's warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Shurflo 355-110-10 bilge pump?\u003c\/strong\u003e The Shurflo 355-110-10 moves 700 gallons per hour (2650 liters per hour), making it a higher-capacity option than Shurflo's 500 GPH bilge pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this bilge pump run on?\u003c\/strong\u003e The 355-110-10 is a 12 VDC bilge pump that draws up to 3.2 amps and is rated for a 5 amp fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurflo 355-110-10 fully submersible?\u003c\/strong\u003e Yes, this pump is designed for continuous-duty submersible operation in the bilge, with a 3 foot tinned wire assembly for above-waterline wiring connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose fits the outlet port?\u003c\/strong\u003e The Shurflo 355-110-10 has a 3\/4 inch (19 mm) outlet port for connecting bilge discharge hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much amperage does the Shurflo 355-110-10 draw?\u003c\/strong\u003e This pump draws up to 3.2 amps maximum and should be wired with a 5 amp fuse, per Shurflo's specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump housing made of?\u003c\/strong\u003e The 355-110-10 has a tough nylon housing for corrosion resistance, along with stainless steel hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Shurflo 355-110-10 come with a warranty?\u003c\/strong\u003e Yes, it is backed by a three year manufacturer's warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the Shurflo 355-110-10 different from Shurflo's 500 GPH bilge pump?\u003c\/strong\u003e The 355-110-10 outputs 700 GPH versus 500 GPH on the smaller model, and it draws more amperage (3.2A max versus 1.8A) to support that higher flow rate; its housing dimensions are 4.25 inches by 3.75 inches, round, compared to 4-1\/2 inches by 3 inches on the 500 GPH pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 355-110-10 bilge pump weigh?\u003c\/strong\u003e The pump weighs 1.0625 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump certified for use near ignition sources?\u003c\/strong\u003e Yes, the 355-110-10 is ignition protected, ISO 8846 approved, and CE listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Shurflo 355-110-10 include an automatic float switch?\u003c\/strong\u003e No, the 355-110-10 is the pump only; it comes with a 3 foot tinned wire assembly for wiring but does not include a float switch, so an automatic switch would need to be added separately for automatic operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the pump attach for installation or removal?\u003c\/strong\u003e The Shurflo 355-110-10 uses a quick-disconnect base plate, which allows the pump to be installed or removed for cleaning without disturbing the mounting or wiring.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49029559189723,"sku":"SHU-355-110-10","price":41.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/shu-355-110-10_lg__57785.1558174484.500.750.jpg?v=1785165654","url":"https:\/\/www.goodvibesmarina.com\/products\/shurflo-700-gph-12v-submersible-marine-bilge-pump-355-110-10","provider":"Good Vibes Marina","version":"1.0","type":"link"}