{"product_id":"shurflo-piranha-357-106-10-ballast-pump-12v-1100-gph-submersible","title":"Shurflo Piranha 357-106-10 Ballast Pump, 12V 1100 GPH Submersible","description":"\u003cp\u003eThe Shurflo Piranha 357-106-10 is a 12 volt submersible ballast pump built to move water quickly and reliably in marine ballast and water transfer systems. Rated for 1100 GPH (18.33 gallons per minute), it is designed for the fill and drain cycles that wake boats, ski boats, and fishing boats depend on for consistent ballast performance. The pump uses a heavy duty motor paired with a high density nylon housing, giving it the strength to resist impacts and corrosion in both freshwater and saltwater environments over repeated seasons of use.\u003c\/p\u003e\u003cp\u003eA patented anti airlock system automatically clears trapped air from the pump so water flow stays consistent during fill and drain operation, preventing the interruptions that can occur with simpler pump designs. The removable cartridge design lets you access the internal components quickly for cleaning or replacement, cutting down on maintenance downtime. The 357-106-10 is fully submersible and includes a corrosion resistant tinned 6 foot wire lead for a dependable underwater electrical connection. It is ISO 8846 ignition protected, meaning it is certified safe for installation in enclosed engine compartments as well as open bilge and ballast locations on recreational and commercial boats.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Shurflo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 357-106-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Ballast Pumps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Submersible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 1100 gallons per hour (18.33 gallons per minute)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 9 inches L x 7 inches W x 3 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nylon, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Lead:\u003c\/strong\u003e Tinned, 6 feet, corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e ISO 8846 ignition protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e Anti airlock system, removable cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses:\u003c\/strong\u003e Fishing boats, ski boats, wake boats, marine water transfer systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flow rate of the Shurflo 357-106-10 ballast pump?\u003c\/strong\u003e The Shurflo 357-106-10 is rated at 1100 gallons per hour, which works out to 18.33 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Shurflo 357-106-10 fully submersible?\u003c\/strong\u003e Yes, the 357-106-10 is a fully submersible ballast pump with a corrosion resistant tinned 6 foot wire lead for reliable underwater electrical connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does this ballast pump run on?\u003c\/strong\u003e The 357-106-10 runs on 12 volts DC, matching standard marine 12V electrical systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the anti airlock system on the Piranha ballast pump?\u003c\/strong\u003e It is a patented feature on the Shurflo 357-106-10 that automatically clears trapped air from the pump so water flow stays consistent during ballast fill and drain cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I clean or service the pump without replacing the whole unit?\u003c\/strong\u003e The 357-106-10 has a removable cartridge design that allows quick access for cleaning or replacement, reducing maintenance time compared to sealed pump designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump safe to install in an engine compartment?\u003c\/strong\u003e Yes, the Shurflo 357-106-10 is ISO 8846 ignition protected, which certifies it for safe installation in enclosed engine compartments on recreational and commercial boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the housing made of?\u003c\/strong\u003e The 357-106-10 uses a high density nylon housing with steel internal components, chosen for resistance to impact and corrosion in both freshwater and saltwater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Shurflo 357-106-10 weigh?\u003c\/strong\u003e This ballast pump weighs 1.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this ballast pump?\u003c\/strong\u003e The 357-106-10 measures 9 inches long by 7 inches wide by 3 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat types of boats is this ballast pump used on?\u003c\/strong\u003e The Shurflo 357-106-10 is used in ballast and marine water transfer systems on wake boats, ski boats, and fishing boats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wire lead on this pump?\u003c\/strong\u003e The 357-106-10 comes with a 6 foot tinned wire lead built to resist corrosion in underwater installations.\u003c\/p\u003e","brand":"Shurflo","offers":[{"title":"Default Title","offer_id":49031288586459,"sku":"SHU-357-106-10","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41a4JlTr1YL_a4005ed8-0fe4-4c71-aa94-df4cb8a115ab.jpg?v=1785212765","url":"https:\/\/www.goodvibesmarina.com\/products\/shurflo-piranha-357-106-10-ballast-pump-12v-1100-gph-submersible","provider":"Good Vibes Marina","version":"1.0","type":"link"}