{"product_id":"sierra-18-2111-power-trim-hose-large-diameter-replaces-mercury-32-88006-32-45959-fits-mercury-mariner-outboard-trim-systems","title":"Sierra 18-2111 Power Trim Hose, Large Diameter, Mercury Marine Outboard Trim System, Replaces 32-88006","description":"\u003cp\u003eThe Sierra 18-2111 is a large-diameter power trim hose built for Mercury Marine outboard trim systems in which the trim pump is mounted external to the transom bracket. It carries hydraulic fluid between the trim cylinder and the connector block as part of the tilt hose circuit, and Sierra designates two of these large-diameter hoses as required per engine (paired with two small-diameter 18-2110 hoses to complete the full four-hose set: one up and one down to each cylinder).\u003c\/p\u003e\u003cp\u003eThe hose is molded in white plastic with a nominal wall thickness of 1.59 millimeters and an inside diameter of 1\/4 inch (64 millimeters), running 5 feet 7 inches (17 meters) in length. Its compact fitting footprint measures 2.52 inches by 2.52 inches. This part corresponds to Mercury Marine OEM number 32-88006, along with cross-reference numbers 32-45959 and 32-97154A1, making it a direct fit for trim systems originally equipped with those hoses.\u003c\/p\u003e\u003cp\u003eBecause trim hoses see continuous hydraulic pressure and flexing during tilt and trim operation, replacing a cracked, leaking, or swollen hose with the correctly sized 18-2111 (large diameter) helps restore proper trim function and prevents fluid loss. Be sure to distinguish this large-diameter hose from the small-diameter 18-2110, since the trim system requires both sizes and installing the wrong diameter in the wrong position will not seat correctly.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-2111\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity Required:\u003c\/strong\u003e 2 required per engine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter:\u003c\/strong\u003e 1\/4 inch (64 millimeters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5 feet 7 inches (17 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 2.52 inches L x 2.52 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Wall Thickness:\u003c\/strong\u003e 1.59 millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.59 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999237064\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMercury Marine outboard trim systems with the trim pump mounted external to the transom bracket; used as the trim cylinder to connector block tilt hose (2 required per engine)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e32-88006\u003c\/li\u003e\n\u003cli\u003e32-45959\u003c\/li\u003e\n\u003cli\u003e32-97154A1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Sierra 18-2111 power trim hose replace?\u003c\/strong\u003e The 18-2111 corresponds to Mercury Marine OEM numbers 32-88006, 32-45959, and 32-97154A1, so any of those part numbers point to this same large-diameter trim hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many of these hoses does a trim system need?\u003c\/strong\u003e Two of the large-diameter 18-2111 hoses are required per engine, paired with two small-diameter 18-2110 hoses to make up the full four-hose trim circuit (one up and one down to each cylinder).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 18-2111 and the 18-2110?\u003c\/strong\u003e The 18-2111 is the large-diameter version of Sierra's power trim hose, while the 18-2110 is the small-diameter version; a complete trim system uses two of each, so the two part numbers are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the 18-2111 trim hose?\u003c\/strong\u003e It has an inside diameter of 1\/4 inch (64 millimeters) and runs 5 feet 7 inches (17 meters) long, with a nominal wall thickness of 1.59 millimeters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this hose made of?\u003c\/strong\u003e The Sierra 18-2111 power trim hose is molded in white plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere does this hose install in the trim system?\u003c\/strong\u003e It runs from the trim cylinder to the connector block as the tilt hose, and is used on trim systems where the trim pump is mounted external to the transom bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-2111 weigh?\u003c\/strong\u003e The Sierra 18-2111 power trim hose weighs 0.59 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 18-2111 fit any Mercury outboard trim system?\u003c\/strong\u003e It fits Mercury Marine trim systems that use the OEM 32-88006, 32-45959, or 32-97154A1 large-diameter trim hose and that have the trim pump mounted external to the transom bracket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Mercury Marine part or an aftermarket replacement?\u003c\/strong\u003e The 18-2111 is a Sierra-branded replacement hose engineered to match the Mercury Marine 32-88006 trim hose and its cross-references, rather than a part sourced from Mercury Marine directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the 18-2111?\u003c\/strong\u003e Each order is for one Sierra 18-2111 large-diameter power trim hose; since two are required per engine, buyers needing a full repair should order two units of the 18-2111 plus two of the small-diameter 18-2110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Sierra 18-2111 hose?\u003c\/strong\u003e The 18-2111 power trim hose is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I identify the 18-2111 by its UPC?\u003c\/strong\u003e Yes, the Sierra 18-2111 large-diameter power trim hose carries UPC 030999237064.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988092235995,"sku":"SIE-18-2111","price":148.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-2111_lg__46083.1558121475.500.750.jpg?v=1785188019","url":"https:\/\/www.goodvibesmarina.com\/products\/sierra-18-2111-power-trim-hose-large-diameter-replaces-mercury-32-88006-32-45959-fits-mercury-mariner-outboard-trim-systems","provider":"Good Vibes Marina","version":"1.0","type":"link"}