{"product_id":"sierra-18-4904-starter-handle-and-rope-for-johnson-evinrude-outboards-4-5-9-64-recoil-pull-rope","title":"Sierra 18-4904 Starter Handle and Rope for Johnson\/Evinrude Outboard Motors","description":"\u003cp\u003eThe Sierra 18-4904 is a complete pull-start replacement kit for Johnson\/Evinrude outboard motors, supplying both the starter handle and the starter rope in one part. It is built for boaters whose factory pull-start handle has cracked, whose rope has frayed or snapped, or whose recoil starter needs a rope replacement to get the engine running again. The kit uses a #4.5 (9\/64 inch), also referenced as 3.6mm, rope size and pairs it with a handle finished with a machined exterior for a secure, comfortable grip during starting. Because the handle and rope are sold together as a single kit, there is no need to source a separate rope and handle to complete a starter cord repair. The 18-4904 ships as a compact, lightweight part, making it an easy, low-cost fix compared with replacing an entire recoil starter assembly. For owners who only need a handle and already have usable rope, Sierra also lists a handle-only part under a separate part number. This kit is intended as a direct fit for the pull-start systems on the Johnson\/Evinrude outboard motors it is designed for.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-4904\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Starter Handle \u0026amp; Rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Size:\u003c\/strong\u003e #4.5 (9\/64 inch) \/ 3.6mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7.0 inches L x 4.88 inches W x 1.75 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 030999318206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e One starter handle and one rope\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for Johnson\/Evinrude outboard motors.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra 18-4904?\u003c\/strong\u003e The Sierra 18-4904 kit includes one starter handle and one starter rope, sold together as a complete pull-start replacement set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope size does the Sierra 18-4904 use?\u003c\/strong\u003e The rope on the Sierra 18-4904 is sized #4.5 (9\/64 inch), also referenced as 3.6mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboard motors is the Sierra 18-4904 designed for?\u003c\/strong\u003e The Sierra 18-4904 starter handle and rope is designed for Johnson\/Evinrude outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Sierra 18-4904 weigh?\u003c\/strong\u003e The Sierra 18-4904 starter handle and rope kit weighs 0.19 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I buy just the starter handle without the rope?\u003c\/strong\u003e Yes, Sierra offers the handle by itself as a separate part number (18-4901) for buyers who only need a replacement handle rather than the full handle-and-rope kit that the 18-4904 provides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the package dimensions of the Sierra 18-4904?\u003c\/strong\u003e The Sierra 18-4904 ships in packaging measuring 7.0 inches long by 4.88 inches wide by 1.75 inches high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the handle grip machined or molded?\u003c\/strong\u003e The handle on the Sierra 18-4904 has a machined exterior finish for a secure grip when pull-starting the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the Sierra 18-4904 starter handle and rope?\u003c\/strong\u003e Installation involves removing the old, worn rope and handle from the recoil starter and threading the new 18-4904 rope through the starter mechanism before attaching the handle; the rope size is #4.5 (9\/64 inch\/3.6mm) to match the original pull-start setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-4904 a genuine Sierra part?\u003c\/strong\u003e Yes, the 18-4904 is a genuine Sierra-branded starter handle and rope kit, not a generic unbranded substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the Sierra 18-4904?\u003c\/strong\u003e The UPC for the Sierra 18-4904 starter handle and rope kit is 030999318206.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is the Sierra 18-4904 manufactured?\u003c\/strong\u003e The Sierra 18-4904 starter handle and rope kit is manufactured in China.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I need to replace my outboard's starter rope and handle?\u003c\/strong\u003e A frayed, snapped, or worn starter rope, or a cracked handle, are common reasons to replace the pull-start components; the Sierra 18-4904 provides both parts together so the repair can be completed in one purchase.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988198895835,"sku":"SIE-18-4904","price":10.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-4904_lg__96274.1558129283.500.750.jpg?v=1785188022","url":"https:\/\/www.goodvibesmarina.com\/products\/sierra-18-4904-starter-handle-and-rope-for-johnson-evinrude-outboards-4-5-9-64-recoil-pull-rope","provider":"Good Vibes Marina","version":"1.0","type":"link"}