{"product_id":"sierra-18-8112-90-degree-hose-fitting-1-npt-x-1-1-4-hose-barb-replaces-oem-97296-97854-marine-engine-cooling","title":"Sierra 18-8112 90 Degree Hose Fitting, 1 inch NPT x 1 1\/4 inch, Crusader Inboard Cooling System, Replaces 97296 97854","description":"\u003cp\u003eThe Sierra 18-8112 is a 90 degree hose fitting engineered for the cooling system on Crusader inboard marine engines. Its angled body routes cooling water hose runs through tight engine compartment spaces without kinking, making it a common replacement when an original fitting has corroded or cracked. The fitting is threaded 1 inch NPT x 1 1\/4 inch, allowing it to connect directly into the cooling system passages it is designed for while accepting the mating hose size on the other end.\u003c\/p\u003e\u003cp\u003eThis is a direct-fit replacement part identified by Sierra part number 18-8112, and it corresponds to the OEM cross-reference numbers 97296 and 97854, so it can be ordered using either the Sierra number or those original equipment numbers. It is intended for use as part of the broader Crusader inboard cooling system lineup, alongside related manifold, riser, and gasket components in that same system.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Sierra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 18-8112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hose Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Angle:\u003c\/strong\u003e 90 degree\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e 1 inch NPT x 1 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Crusader inboard cooling system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Cross Reference:\u003c\/strong\u003e 97296, 97854\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 808282126803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCrusader inboard engine cooling system\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e97296\u003c\/li\u003e\n\u003cli\u003e97854\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Sierra 18-8112 hose fitting used for?\u003c\/strong\u003e It is a 90 degree hose fitting used in the cooling system of Crusader inboard marine engines, routing cooling water hose around tight spaces in the engine compartment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is the 18-8112 fitting?\u003c\/strong\u003e The Sierra 18-8112 is a 90 degree fitting, allowing a hose run to change direction by a right angle rather than requiring a straight connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread size does the 18-8112 fitting have?\u003c\/strong\u003e It is threaded 1 inch NPT x 1 1\/4 inch, matching the cooling system passage and hose connection it is designed for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Sierra 18-8112 replace any OEM part numbers?\u003c\/strong\u003e Yes, Sierra 18-8112 replaces OEM numbers 97296 and 97854, so it can be cross-referenced and ordered against either of those original part numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill 18-8112 fit any inboard engine cooling system?\u003c\/strong\u003e Sierra 18-8112 is designed for the Crusader inboard engine cooling system rather than being a universal fitting, so it should be matched against the OEM numbers 97296 or 97854 for confirmation before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 18-8112 hose fitting weigh?\u003c\/strong\u003e The Sierra 18-8112 hose fitting weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Sierra 18-8112 a genuine or aftermarket part?\u003c\/strong\u003e The 18-8112 is sold under the Sierra brand as a replacement part for the Crusader cooling system, cross-referenced to OEM numbers 97296 and 97854 rather than being an OEM-branded component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other components does the 18-8112 fitting work alongside?\u003c\/strong\u003e Within the Crusader inboard cooling system, the 18-8112 fitting is used along with related manifold, riser, spacer, and gasket parts that make up the same cooling circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Sierra 18-8112?\u003c\/strong\u003e The 18-8112 is supplied as the single 90 degree, 1 inch NPT x 1 1\/4 inch hose fitting; it does not include the mounting bolts or gasket kits used elsewhere in the cooling system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I identify the 18-8112 fitting by its OEM number instead of the Sierra number?\u003c\/strong\u003e Yes, if you only have the OEM number 97296 or 97854 from your original fitting, that cross-references directly to Sierra part number 18-8112.\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":48988433219803,"sku":"SIE-18-8112","price":57.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/SIE-18-8112_lg__76116.1678126821.500.750.jpg?v=1785188095","url":"https:\/\/www.goodvibesmarina.com\/products\/sierra-18-8112-90-degree-hose-fitting-1-npt-x-1-1-4-hose-barb-replaces-oem-97296-97854-marine-engine-cooling","provider":"Good Vibes Marina","version":"1.0","type":"link"}