{"product_id":"t-h-marine-atlas-hydraulic-jack-plate-8-inch-setback-outboards-up-to-300-hp-625-lb-ahj-8v","title":"T-H Marine ATLAS Hydraulic Jack Plate, AHJ-8V, 8 Inch Setback, Up to 300 HP \/ 625 lb","description":"\u003cp\u003eThe T-H Marine ATLAS Hydraulic Jack Plate (AHJ-8V) is an 8 inch setback hydraulic jack plate built for outboard engines up to 300 hp or up to 625 pounds dry weight. It uses a self-contained one-piece hydraulic pump system, so there is no separate reservoir or hydraulic lines to install, and it lifts the engine from bottom to top in less than 8 seconds. The lifting mechanism uses a rod and slot design with high-tech engineered polymer rods rated up to six times more abrasion resistant than steel rods, and the rods are made from a self-lubricating material that eliminates the need for regular grease maintenance. A two-pin pump removal design allows for quick field maintenance and actuator replacement without removing the whole plate. The transom-side mounting plate measures 16 3\/8 inches wide by 12 1\/2 inches tall, with a stroke length of 5 inches and up to 7 inches of total height adjustment. The plate ships with a relay harness and rocker switch for engine control, and it is predrilled for Power-Pole and Minn-Kota Talon shallow water anchor bracket mounting. Mounting bolts are not included, and boat manufacturers or local dealers should be consulted for the correct setback recommendation for a specific boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e AHJ-8V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Jack Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Engine Rating:\u003c\/strong\u003e 300 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Dry Weight Capacity:\u003c\/strong\u003e 625 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransom Mounting Plate Dimensions:\u003c\/strong\u003e 16 3\/8 inches wide x 12 1\/2 inches tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke Length:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight Adjustment Range:\u003c\/strong\u003e Up to 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift Speed:\u003c\/strong\u003e Bottom to top in less than 8 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 66.8 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 20.5 x 17.5 x 11 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Relay harness and rocker switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Mounting Compatibility:\u003c\/strong\u003e Predrilled for Power-Pole and Minn-Kota Talon brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e Mounting bolts not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated for outboard engines up to 300 hp or up to 625 pounds dry weight\u003c\/li\u003e\n\u003cli\u003eContact your boat manufacturer or local dealer for the correct setback recommendation for your particular boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback on the AHJ-8V jack plate?\u003c\/strong\u003e The T-H Marine AHJ-8V ATLAS Hydraulic Jack Plate has an 8 inch setback, positioning the outboard 8 inches further behind the transom than a standard mount.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size engine can this jack plate handle?\u003c\/strong\u003e The AHJ-8V is rated for outboard engines up to 300 hp or up to 625 pounds of dry weight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ATLAS jack plate require a separate hydraulic reservoir or lines?\u003c\/strong\u003e No. The ATLAS Hydraulic Jack Plate uses a self-contained one-piece hydraulic pump system, so there is no reservoir or external hydraulic lines to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does the jack plate lift the engine?\u003c\/strong\u003e The AHJ-8V lifts the outboard from bottom to top in less than 8 seconds thanks to its one-piece hydraulic pump design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the transom mounting plate?\u003c\/strong\u003e On the AHJ-8V, the transom side of the plate measures 16 3\/8 inches wide by 12 1\/2 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much height adjustment does the jack plate provide?\u003c\/strong\u003e The ATLAS AHJ-8V provides up to 7 inches of height adjustment with a 5 inch stroke length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the AHJ-8V come with mounting bolts?\u003c\/strong\u003e No. Mounting bolts are not included with the T-H Marine AHJ-8V ATLAS Hydraulic Jack Plate and must be sourced separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the jack plate?\u003c\/strong\u003e The AHJ-8V ships with a relay harness and rocker switch for controlling engine lift and lower operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AHJ-8V compatible with shallow water anchors like Power-Pole?\u003c\/strong\u003e Yes. The AHJ-8V is predrilled for Power-Pole and Minn-Kota Talon bracket mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the jack plate require regular grease lubrication?\u003c\/strong\u003e No. The ATLAS AHJ-8V uses self-lubricating polymer lifting rods, so it does not require regular grease maintenance like many competing jack plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the AHJ-8V weigh?\u003c\/strong\u003e The T-H Marine AHJ-8V ATLAS Hydraulic Jack Plate weighs 66.8 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the lifting rods made from?\u003c\/strong\u003e The AHJ-8V uses high-tech engineered polymer lifting rods rated up to six times more abrasion resistant than steel rods.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991260410075,"sku":"T-H-AHJ-8V-DP","price":2139.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/AHJ-CL_Silver_5e4b3670-2e61-4a45-bd19-1fd0e72e9e2f.jpg?v=1784498412","url":"https:\/\/www.goodvibesmarina.com\/products\/t-h-marine-atlas-hydraulic-jack-plate-8-inch-setback-outboards-up-to-300-hp-625-lb-ahj-8v","provider":"Good Vibes Marina","version":"1.0","type":"link"}