{"product_id":"t-h-marine-ceacap-bulkhead-pass-thru-fitting-3-4-inch-hole-1-4-inch-slot-black","title":"T-H Marine CeaCap Bulkhead Pass Thru Fitting, 3\/4 Inch Hole, 1\/4 Inch Slot, Black","description":"\u003cp\u003eThe T-H Marine CeaCap Bulkhead Pass Thru Fitting (CC-1) creates a watertight pass through point for routing cables, tubing, or wires through a boat bulkhead. It is well suited for transducer cable installs and other rigging runs where a sealed, protected pass through helps keep water from intruding into dry compartments. Rather than requiring drilling for hardware and separate fasteners, the fitting uses a self-attaching design that installs directly into the bulkhead opening, simplifying the job and keeping the finished rigging layout clean.\u003c\/p\u003e\u003cp\u003eThis CC-1 version is sized for a 3\/4 inch hole with a 1\/4 inch slot for routing the cable or tubing through, and it finishes with a 1-1\/4 inch flange in black to blend with most boat interiors. A turn down washer is included and works with the fitting's patented design to help hold it securely in place and give the installation a finished look. The housing is molded plastic, built to hold up in a marine environment. CeaCap fittings are offered in multiple hole sizes and colors, and the CC-1 covers the 3\/4 inch, 1\/4 inch slot, black configuration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e CC-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name:\u003c\/strong\u003e CeaCap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size:\u003c\/strong\u003e 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot Size:\u003c\/strong\u003e 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Size:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Shape:\u003c\/strong\u003e Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Self-attaching, no additional hardware required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Bulkhead pass thru fitting and turn down washer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole does the T-H Marine CC-1 bulkhead fitting require?\u003c\/strong\u003e The CC-1 is designed for a 3\/4 inch hole in the bulkhead, with a 1\/4 inch slot for routing the cable or tubing through the fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC-1 require any extra hardware to install?\u003c\/strong\u003e No. The CC-1 uses a self-attaching design that installs into the bulkhead opening without additional screws or fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the CC-1 fitting?\u003c\/strong\u003e Black. The T-H Marine CC-1 is finished in black to blend in with most boat interiors and helms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a washer included with the CC-1?\u003c\/strong\u003e Yes, a turn down washer is included with the CC-1 and works with its patented design to help hold the fitting securely in the bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the CC-1 fitting made of?\u003c\/strong\u003e The CC-1 bulkhead pass thru fitting has a plastic housing built for marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flange size on the CC-1?\u003c\/strong\u003e The finished flange on the CC-1 measures 1-1\/4 inch in diameter once installed in the bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the CC-1 be used for transducer cable installs?\u003c\/strong\u003e Yes. The CC-1 is well suited for routing transducer cables through a bulkhead while maintaining a watertight seal at the pass through point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the T-H Marine CC-1 weigh?\u003c\/strong\u003e The CC-1 bulkhead pass thru fitting weighs 0.2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the CC-1 keep water out of the compartment behind the bulkhead?\u003c\/strong\u003e The CC-1 is designed to create a watertight pass thru seal around cables, tubing, or wires, helping keep rigging runs sealed at the bulkhead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the CC-1 come in other sizes or colors?\u003c\/strong\u003e T-H Marine's CeaCap line, which includes the CC-1, is offered in multiple hole sizes and colors; the CC-1 specifically is the 3\/4 inch hole, 1\/4 inch slot, black version.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":49033322889435,"sku":"T-H-CC-1-DP","price":11.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41S3h4ha3oL.jpg?v=1785244672","url":"https:\/\/www.goodvibesmarina.com\/products\/t-h-marine-ceacap-bulkhead-pass-thru-fitting-3-4-inch-hole-1-4-inch-slot-black","provider":"Good Vibes Marina","version":"1.0","type":"link"}