{"product_id":"t-h-marine-cmc-pt-35-electric-hydraulic-tilt-and-trim-for-outboards-up-to-35-hp-part-52100","title":"T-H Marine CMC PT-35 Electric Hydraulic Tilt and Trim for Outboards up to 35 HP, Part 52100","description":"\u003cp\u003eThe T-H Marine CMC PT-35 is an electric hydraulic tilt and trim system built for outboards up to 35 HP, giving small and lightweight boats the kind of trim control normally found only on larger, factory-equipped outboards. It is designed for jon boats, aluminum fishing boats, inflatables, tiller-steer outboards, and other small skiffs and utility boats where precise motor angle adjustment improves handling and performance.\u003c\/p\u003e\u003cp\u003eBy adjusting motor angle on the fly, the PT-35 helps boats get on plane faster even with heavier loads, improves top-end speed and fuel efficiency, reduces bow rise and porpoising, and allows the operator to quickly tilt the motor up for running in shallow water or protecting the lower unit near hazards or while trailering. The unit uses a fully self-contained electric hydraulic actuator rated at 7853 lbs of thrust, so no external pumps or hydraulic hoses are required for installation.\u003c\/p\u003e\u003cp\u003eConstruction is high-strength aluminum with corrosion-resistant components suited for both freshwater and saltwater environments. The PT-35 mounts to most small clamp-on and bolt-on outboards, provided the transom has adequate mounting clearance. The package includes one hydraulic PT-35 unit, one wire assembly with toggle switch, and one switch plate with rubber boot, making it a straightforward upgrade for boaters with basic tools.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 52100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e PT-35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Rating:\u003c\/strong\u003e Up to 35 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Back:\u003c\/strong\u003e 5-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and Tilt Range:\u003c\/strong\u003e 84 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Mounting Inside Dimension:\u003c\/strong\u003e 11 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectric Hydraulic Actuator Rating:\u003c\/strong\u003e 7853 pounds of thrust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Transom Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Freshwater and Saltwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 739697521009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Equivalent Part Number:\u003c\/strong\u003e T-H Marine PT35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year limited warranty on actuator, 5 year limited warranty on frame\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for outboard motors rated up to 35 HP, including clamp-on and bolt-on outboards used on jon boats, aluminum fishing boats, inflatable boats, tiller-steer outboards, and small skiffs and utility boats. Verify the transom provides adequate mounting clearance before installation.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eT-H Marine PT35\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size outboard is the T-H Marine CMC PT-35 designed for?\u003c\/strong\u003e The PT-35 electric hydraulic tilt and trim, part number 52100, is designed for small outboards rated up to 35 HP, making it a match for jon boats, aluminum fishing boats, inflatables, and other lightweight rigs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the PT-35 work with clamp-on outboards as well as bolt-on outboards?\u003c\/strong\u003e Yes, the T-H Marine CMC PT-35 is designed to work with most small clamp-on and bolt-on outboards as long as the transom provides enough flat mounting area for the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install the PT-35 tilt and trim myself?\u003c\/strong\u003e Many boaters with basic tools can install the PT-35 themselves since it is a fully self-contained electric hydraulic actuator with no external pumps or hydraulic lines to plumb, though it does require safely supporting the outboard and following the wiring instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the CMC PT-35 suitable for saltwater use?\u003c\/strong\u003e Yes, the PT-35 (part 52100) is built with high-strength aluminum and corrosion-resistant components, making it suitable for both freshwater and saltwater environments; rinsing with fresh water after saltwater use is recommended to maximize service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the CMC PT-35 kit?\u003c\/strong\u003e Each PT-35 package includes one hydraulic PT-35 unit, one wire assembly with toggle switch, and one switch plate with rubber boot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much thrust does the PT-35 actuator provide?\u003c\/strong\u003e The electric hydraulic actuator in the CMC PT-35 is rated at 7853 lbs of thrust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the trim and tilt range on the PT-35?\u003c\/strong\u003e The T-H Marine CMC PT-35 provides an 84 degree trim and tilt range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the PT-35 tilt and trim unit weigh?\u003c\/strong\u003e The CMC PT-35 (part 52100) weighs 28 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the PT-35 made from?\u003c\/strong\u003e Aluminum is used for the PT-35 housing, giving it corrosion resistance for both freshwater and saltwater use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the CMC PT-35 run on?\u003c\/strong\u003e The PT-35 electric hydraulic actuator operates on 12 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an OEM equivalent part number for the CMC PT-35?\u003c\/strong\u003e Yes, part number 52100 is also listed under the equivalent designation T-H Marine PT35.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the CMC PT-35?\u003c\/strong\u003e The PT-35 tilt and trim carries a 1 year limited warranty on the actuator and a 5 year limited warranty on the frame.\u003c\/p\u003e","brand":"CMC Marine","offers":[{"title":"Default Title","offer_id":49027443065051,"sku":"T-H-52100","price":913.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/52100__63228.1770304732.500.750.jpg?v=1785163481","url":"https:\/\/www.goodvibesmarina.com\/products\/t-h-marine-cmc-pt-35-electric-hydraulic-tilt-and-trim-for-outboards-up-to-35-hp-part-52100","provider":"Good Vibes Marina","version":"1.0","type":"link"}