{"product_id":"t-h-marine-ell-118-90-degree-barbed-elbow-fitting-for-1-1-8-inch-id-marine-hose","title":"T-H Marine ELL-118 90 Degree Barbed Elbow Hose Fitting, 1-1\/8 Inch ID Hose","description":"\u003cp\u003eThe T-H Marine ELL-118 is a 90 degree barbed elbow fitting molded specifically to fit marine hose dimensions. It lets you make a clean 90 degree turn in hose routing without kinking the hose, so runs stay open and flow is not restricted at tight bends. The fitting can also be used as a hose junction when repairing a damaged section of hose, joining two lengths back into a continuous run.\u003c\/p\u003e\u003cp\u003eBoth legs of the ELL-118 share the same barb dimension, sized to fit 1-1\/8 inch ID hose. The barbed profile grips the inside of the hose to help the connection resist slipping and pulling loose under vibration and water pressure, and is intended to be secured with a hose clamp on each leg for a complete installation.\u003c\/p\u003e\u003cp\u003eThis fitting is part of a broader T-H Marine barbed elbow lineup covering multiple hose sizes, so it is built to the same design and fit standard used across that family. It is a straightforward, functional fitting for boat builders, hose repair, and general plumbing runs anywhere a 90 degree hose turn is needed.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e ELL-118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 90 Degree Barbed Elbow Hose Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Fitting Size:\u003c\/strong\u003e 1-1\/8 inch ID hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Configuration:\u003c\/strong\u003e Same barb dimension on both legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572064322\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the T-H Marine ELL-118 fit?\u003c\/strong\u003e The ELL-118 is sized for 1-1\/8 inch ID hose on both legs of the elbow, since both legs share the same barb dimension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat angle is this elbow fitting?\u003c\/strong\u003e It is a 90 degree elbow, allowing a hose run to turn a full right angle without the hose itself kinking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the ELL-118 be used to repair a damaged hose?\u003c\/strong\u003e Yes, the ELL-118 can be used as a hose junction to splice two hose sections together when repairing a damaged run, in addition to its normal use for routing turns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy use a barbed elbow instead of just bending the hose?\u003c\/strong\u003e Bending 1-1\/8 inch ID hose sharply can kink it and restrict flow; the ELL-118's molded 90 degree barb lets the hose route around a corner while staying fully open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the ELL-118 weigh?\u003c\/strong\u003e The T-H Marine ELL-118 weighs 0.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the ELL-118 need hose clamps to install?\u003c\/strong\u003e The barbed legs are designed to grip the inside of 1-1\/8 inch hose, and each leg should be secured with a hose clamp for a complete, leak-resistant connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre both legs of the ELL-118 the same size?\u003c\/strong\u003e Yes, the ELL-118 has the same barb dimension on each leg, both sized for 1-1\/8 inch ID hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ELL-118 part of a larger size range?\u003c\/strong\u003e T-H Marine makes this same barbed elbow design in multiple hose sizes, with the ELL-118 covering 1-1\/8 inch ID hose specifically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for the T-H Marine ELL-118?\u003c\/strong\u003e The UPC for the ELL-118 90 degree barbed elbow fitting is 733572064322.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the ELL-118 made for marine hose dimensions specifically?\u003c\/strong\u003e Yes, the ELL-118 is molded specifically to fit marine hose dimensions rather than generic industrial hose sizing.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991262441691,"sku":"T-H-ELL-118DP","price":8.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/3-4-ell-3-4-dp-barbed-elbow-fittings-28282898022443.jpg?v=1784498500","url":"https:\/\/www.goodvibesmarina.com\/products\/t-h-marine-ell-118-90-degree-barbed-elbow-fitting-for-1-1-8-inch-id-marine-hose","provider":"Good Vibes Marina","version":"1.0","type":"link"}