{"product_id":"t-h-marine-jpz-6-z-lock-manual-jack-plate-6-setback-for-v6-v8-outboards-up-to-300-hp","title":"T-H Marine Z-Lock JPZ-6 Manual Jack Plate, 6 Inch Setback for V6\/V8 Outboards up to 300 HP","description":"\u003cp\u003eThe T-H Marine Z-Lock Manual Jack Plate JPZ-6 is a 6 inch setback jack plate built to move your outboard aft and adjust its height for improved performance, hole shot, and top speed. It handles all V6 and V8 outboards up to 300 hp, making it suited to a wide range of bass boats and other outboard-powered rigs. The Z-Lock design upgrades T-H Marine's HI-JACKER jack plate series with matching slotted extrusions that lock the side plates in place, eliminating the side slippage that can develop over time on ordinary jack plate designs. This keeps the plate rigid and aligned under load instead of working loose.\u003c\/p\u003e\u003cp\u003eConstruction is strong aircraft grade aluminum, a full 1\/2 inch thick for strength, so the plate stands up to the stress of high-horsepower outboards and repeated trim cycles. The plate provides 5 inches of vertical adjustment and is easy to adjust from the top of the jack, so height changes can be made without dropping the plate off the boat. Because the JPZ-6 is a manual jack plate, setback and height are set by hand rather than by hydraulic actuator, which keeps the design simple with fewer parts to maintain. T-H Marine recommends contacting your boat manufacturer or local dealer for the correct setback recommendation for your specific boat, and to understand how adding a jack plate can affect your boat's handling. The Z-Lock series is also available in 4, 8, 10, and 12 inch setbacks if a different setback is needed, and is compatible with T-H Marine's Hot Shot hole shot plate for additional hole shot improvement.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e JPZ-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetback:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aircraft grade aluminum, 1\/2 inch thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Adjustment:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e V6 and V8 outboards up to 300 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e 850 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 33 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 7 x 16 x 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Z-Lock matching slotted extrusions lock side plates in place\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eV6 and V8 outboards up to 300 hp\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the setback on the T-H Marine JPZ-6 jack plate?\u003c\/strong\u003e The JPZ-6 is a 6 inch setback jack plate. T-H Marine's Z-Lock manual jack plate line also offers 4, 8, 10, and 12 inch setback options if a different distance is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards is the JPZ-6 rated for?\u003c\/strong\u003e It handles all V6 and V8 outboards up to 300 hp. Contact your boat manufacturer or local dealer for the correct setback recommendation for your specific boat before installing the JPZ-6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much vertical adjustment does the Z-Lock jack plate provide?\u003c\/strong\u003e The JPZ-6 provides 5 inches of vertical adjustment, and it is designed to be easy to adjust from the top of the jack plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the JPZ-6 jack plate made from?\u003c\/strong\u003e It is made of strong aircraft grade aluminum, a full 1\/2 inch thick, giving the plate strength to handle high-horsepower outboard loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the Z-Lock design actually do differently?\u003c\/strong\u003e Z-Lock adds matching slotted extrusions that lock the side plates in place, which eliminates the side slippage that can occur on jack plates without this feature. This is the design upgrade added to T-H Marine's HI-JACKER jack plate series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the JPZ-6 a manual or hydraulic jack plate?\u003c\/strong\u003e The JPZ-6 is a manual jack plate, adjusted by hand rather than by a hydraulic actuator, which keeps its design simple with fewer components to maintain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions and weight of the JPZ-6?\u003c\/strong\u003e The JPZ-6 Z-Lock Manual Jack Plate weighs 33 pounds and has product dimensions of 7 x 16 x 18 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat load capacity does the JPZ-6 support?\u003c\/strong\u003e The JPZ-6 has a rated load capacity of 850 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add a hole shot plate to the JPZ-6?\u003c\/strong\u003e Yes, T-H Marine's JPZHSP-6 Hot Shot Hole Shot Plate is designed to fit the JPZ-6 Z-Lock jack plate and attaches to the bottom of the jack plate to improve hole shot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does the JPZ-6 jack plate come in?\u003c\/strong\u003e The JPZ-6 Z-Lock Manual Jack Plate is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to know my boat's recommended setback before ordering?\u003c\/strong\u003e Yes, T-H Marine advises contacting your boat manufacturer or local dealer for a setback recommendation specific to your boat, since adding a jack plate like the JPZ-6 can affect boat handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the JPZ-6 different from a standard non-locking jack plate?\u003c\/strong\u003e Unlike jack plates without a locking mechanism, the JPZ-6's Z-Lock design uses matching slotted extrusions to lock the side plates in place, preventing the side slippage that can develop on standard designs over time.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991264473307,"sku":"T-H-JPZ-6-DP","price":580.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/z-lock-manual-jack-plate-33062322569259.jpg?v=1784498645","url":"https:\/\/www.goodvibesmarina.com\/products\/t-h-marine-jpz-6-z-lock-manual-jack-plate-6-setback-for-v6-v8-outboards-up-to-300-hp","provider":"Good Vibes Marina","version":"1.0","type":"link"}