{"product_id":"t-h-marine-tee-3-4-barbed-tee-fitting-3-way-3-4-hose-id-marine-hose-barb-connector","title":"T-H Marine TEE-3\/4 Barbed Tee Fitting, 3 Way, 3\/4 Inch Hose ID","description":"\u003cp\u003eThe T-H Marine TEE-3\/4 is a barbed tee fitting molded specifically to fit marine hose dimensions, giving you a reliable three-way branch connection for onboard plumbing, bilge, livewell, washdown, and drain hose runs. Like all T-H Marine standard tees, the TEE-3\/4 has the same barb dimension on each of its three legs, so all three connections accept 3\/4 inch inside-diameter hose without needing a reducing adapter. This straight (90 degree) tee configuration is the standard choice when you need to split or combine flow between two equal-size hose runs at a right angle, as opposed to a wye fitting, which angles the branch line to reduce turbulence.\u003c\/p\u003e\u003cp\u003eBecause the barb dimensions are matched across all three ports, installation is straightforward: push each hose end over its barb and secure with a hose clamp on every leg. The fitting is part of T-H Marine's standard tee lineup, which spans hose IDs from 1\/8 inch up to 1-1\/2 inch, so boat builders and repair techs can standardize on the same barbed-tee design across multiple hose sizes on a single vessel.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e T-H Marine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e TEE-3\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Barbed Tee Fitting (3 Way)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 3 (tee configuration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Barb Size (all legs):\u003c\/strong\u003e 3\/4 inch Hose I.D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Style:\u003c\/strong\u003e Standard Tee (equal barb dimension on each leg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 733572067453\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack (OEM\/Bulk):\u003c\/strong\u003e 50 per box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Pack (Distributor Packaged):\u003c\/strong\u003e 12 per box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size hose does the T-H Marine TEE-3\/4 fit?\u003c\/strong\u003e All three legs of the TEE-3\/4 are barbed for 3\/4 inch inside-diameter hose, since T-H Marine's standard tees use the same barb dimension on every leg.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TEE-3\/4 a straight tee or an angled wye fitting?\u003c\/strong\u003e It is a standard tee, meaning the branch line meets the main run at a 90 degree angle, unlike a wye fitting where the branch enters at 45 degrees to reduce turbulence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use different hose sizes on each leg of this fitting?\u003c\/strong\u003e No. The TEE-3\/4 is a standard (non-reducing) tee, so all three legs are barbed for the same 3\/4 inch hose I.D.; if you need mixed sizes, T-H Marine's reducing tee line (such as the TEE-250 or TEE-350) is the correct option instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the TEE-3\/4 tee fitting weigh?\u003c\/strong\u003e The T-H Marine TEE-3\/4 weighs 0.01 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I install the TEE-3\/4 on my boat's hose lines?\u003c\/strong\u003e Push each of the three 3\/4 inch hose ends fully onto the barbed legs of the TEE-3\/4 and secure each connection with a properly sized hose clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this fitting typically used for on a boat?\u003c\/strong\u003e The TEE-3\/4 is used to branch or combine 3\/4 inch hose runs in onboard plumbing systems such as livewell, washdown, bilge, or drain lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes T-H Marine make this tee in other hose sizes?\u003c\/strong\u003e Yes, the same standard tee design is available for 1\/8, 3\/8, 5\/8, 3\/4, 1-1\/8, and 1-1\/2 inch hose I.D., with the TEE-3\/4 covering the 3\/4 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is a standard tee different from a reducing tee?\u003c\/strong\u003e A standard tee like the TEE-3\/4 has the same barb size on all three legs, while a reducing tee has two main legs of one size and a third leg of a smaller size for combining smaller hoses into one larger drain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat packaging does the TEE-3\/4 come in?\u003c\/strong\u003e The TEE-3\/4 is packed 50 per box in OEM\/bulk packaging or 12 per box in distributor packaging (TEE-3\/4).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TEE-3\/4 genuine T-H Marine or an aftermarket part?\u003c\/strong\u003e The TEE-3\/4 is a genuine T-H Marine barbed tee fitting, molded specifically to marine hose dimensions.\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":48991271026907,"sku":"T-H-TEE-3-4DP","price":8.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/1-1-2-hose-i-d-standard-tee-fittings-28276123500587_da9f90bd-6b6d-456c-85a3-71ffff3f1557.jpg?v=1784499017","url":"https:\/\/www.goodvibesmarina.com\/products\/t-h-marine-tee-3-4-barbed-tee-fitting-3-way-3-4-hose-id-marine-hose-barb-connector","provider":"Good Vibes Marina","version":"1.0","type":"link"}