{"product_id":"taco-metals-adjustable-clamp-on-rod-holder-stainless-steel-fits-1-1-16-and-1-5-16-inch-o-d-pipe-f16-2623pol-1","title":"TACO Metals Adjustable Clamp-On Rod Holder, Stainless Steel, Fits 1-1\/16 and 1-5\/16 Inch O.D. Pipe, F16-2623POL-1","description":"\u003cp\u003eThe TACO Metals F16-2623POL-1 is an adjustable clamp-on rod holder built from stainless steel for long-term durability in the marine environment. It mounts directly to a rail or pipe with a clamp fitting, eliminating the need to drill holes in the boat, and is sized to fit 1-1\/16 inch and 1-5\/16 inch O.D. Pipe, as well as 1-1\/4 inch O.D. Tube, giving it a wide range of rail-mounting compatibility on center consoles, T-tops, and gunwale rails. The clamp design allows the holder to be adjusted and positioned to the angle that works best for trolling, casting, or simply storing a rod within reach while underway. Stainless steel construction resists corrosion from saltwater spray and sun exposure, making it a durable choice for offshore and inshore fishing boats alike. Because it clamps on rather than requiring permanent fasteners, the F16-2623POL-1 can be repositioned or removed without leaving mounting holes behind, which is useful for anglers who want flexible rod storage or who move the holder between different rail locations on the boat.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TACO Metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e F16-2623POL-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Clamp-On\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe O.D. Compatibility:\u003c\/strong\u003e 1-1\/16 inch and 1-5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube O.D. Compatibility:\u003c\/strong\u003e 1-1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter Capacity:\u003c\/strong\u003e 1.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.18 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat pipe and tube sizes does the F16-2623POL-1 rod holder fit?\u003c\/strong\u003e The TACO Metals F16-2623POL-1 clamps onto 1-1\/16 inch and 1-5\/16 inch O.D. Pipe, and also fits 1-1\/4 inch O.D. Tube, covering most common rail diameters found on center consoles and T-tops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the F16-2623POL-1 rod holder made of stainless steel?\u003c\/strong\u003e Yes, the F16-2623POL-1 is constructed of stainless steel, which resists corrosion in saltwater and marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this rod holder require drilling into the boat to install?\u003c\/strong\u003e No drilling is required for the F16-2623POL-1. It uses a clamp-on mounting design that attaches directly to a compatible pipe or rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the angle of the F16-2623POL-1 be adjusted after mounting?\u003c\/strong\u003e Yes, the clamp-on design of the F16-2623POL-1 allows the rod holder to be adjusted to the desired angle once it is secured to the rail or pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the TACO F16-2623POL-1 rod holder weigh?\u003c\/strong\u003e The F16-2623POL-1 weighs 3.18 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat diameter rod does the F16-2623POL-1 hold?\u003c\/strong\u003e The F16-2623POL-1 is sized for rods up to 1.63 inches in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the F16-2623POL-1 a permanent or removable mount?\u003c\/strong\u003e It is removable. Because the F16-2623POL-1 clamps onto a pipe or rail rather than using fixed fasteners, it can be repositioned or taken off without leaving mounting holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included when I order the F16-2623POL-1?\u003c\/strong\u003e Ordering the F16-2623POL-1 includes one TACO Metals adjustable clamp-on rod holder unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the F16-2623POL-1 fit a standard 1 inch rail?\u003c\/strong\u003e The F16-2623POL-1 is designed for 1-1\/16 inch and 1-5\/16 inch O.D. Pipe or 1-1\/4 inch O.D. Tube; a plain 1 inch rail falls outside these stated compatible diameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the F16-2623POL-1 suitable for saltwater use?\u003c\/strong\u003e Yes, the stainless steel construction of the F16-2623POL-1 is intended to hold up in saltwater marine environments.\u003c\/p\u003e","brand":"Taco Marine","offers":[{"title":"Default Title","offer_id":49031444824283,"sku":"TAC-F16-2623POL-1","price":179.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/51oGzi5JcVL.jpg?v=1785214209","url":"https:\/\/www.goodvibesmarina.com\/products\/taco-metals-adjustable-clamp-on-rod-holder-stainless-steel-fits-1-1-16-and-1-5-16-inch-o-d-pipe-f16-2623pol-1","provider":"Good Vibes Marina","version":"1.0","type":"link"}