{"product_id":"taylor-made-1152-tuff-end-inflatable-round-boat-fender-white-21-in-diameter-112-lb-buoyancy","title":"Taylor Made Tuff End Round Fender, 21 Inch, White, 112 lb Capacity","description":"\u003cp\u003eThe Taylor Made Tuff End Round Fender (part number 1152) is a 21 inch marine-grade vinyl fender built for boats that need a durable, high-capacity buoy for mooring or dockside protection. It is finished in white and constructed as a seamless one-piece vinyl shell, which Taylor Made uses across its Tuff End line to eliminate the seams that are typically the first failure point on lower-cost fenders. The ends are injection molded and tested to 2000 psi tensile strength, giving the fender the toughness to hold up against repeated contact with pilings, docks, and other hulls.\u003c\/p\u003e\u003cp\u003eThis fender measures 21 inches in diameter with a 66 inch circumference and is rated for a 112 pound weight capacity, making it suited to boats that need a larger-capacity round fender than Taylor Made's smaller Tuff End sizes. It is designed to be rigged with 1-1\/2 inch line, and large line holes at each end accept most ropes and standard shackles for quick tie-off. Inflation is handled through a tri-valve, so it can be filled with a standard ball pump, a football needle, or an air compressor, whichever is on hand at the dock. The complete fender weighs 9.34 pounds as shipped.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1152\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e 61152\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 21 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircumference:\u003c\/strong\u003e 66 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Line Size:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 112 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 9.34 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade vinyl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Seamless one-piece body with injection molded ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation Valve:\u003c\/strong\u003e Tri-valve (ball pump, football needle, or compressor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Round Fenders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Taylor Made 1152 round fender meant for?\u003c\/strong\u003e The 1152 is a 21 inch diameter round fender rated for a 112 pound weight capacity, which puts it in the larger-capacity end of Taylor Made's Tuff End round fender lineup for boats that need more cushioning and load support than a small fender can provide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow big is this fender exactly?\u003c\/strong\u003e Taylor Made part number 1152 measures 21 inches in diameter with a 66 inch circumference.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat line size should I use to rig this fender?\u003c\/strong\u003e Taylor Made recommends 1-1\/2 inch line for the 1152 round fender, and the large line holes molded into each end accept most ropes and standard shackles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 1152 fender made of?\u003c\/strong\u003e It is built from marine-grade vinyl in a seamless one-piece construction, which avoids the seam failures common on lower-quality fenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do you inflate this fender?\u003c\/strong\u003e The 1152 uses a tri-valve, so it can be inflated with a standard ball pump, a football inflation needle, or an air compressor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the fender weigh?\u003c\/strong\u003e The Taylor Made 1152 round fender weighs 9.34 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat weight capacity is this fender rated for?\u003c\/strong\u003e Part number 1152 carries a 112 pound weight capacity rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part number 61152 the same fender as 1152?\u003c\/strong\u003e 61152 is the alternate part number listed alongside 1152 for this same 21 inch round fender, so buyers may see either number referencing this product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color does this fender come in?\u003c\/strong\u003e The 1152 round fender is finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow durable are the ends of this fender?\u003c\/strong\u003e The injection molded ends on the Tuff End construction used for part 1152 are tested to 2000 psi tensile strength for added durability against dock and hull contact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fender work as a mooring buoy?\u003c\/strong\u003e Yes, the round shape, 1-1\/2 inch line rigging, and 112 pound capacity of the 1152 make it suitable for use as a mooring buoy in addition to a dockside fender.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989666246875,"sku":"NAT-1152","price":221.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/71jA1XSEf4L_075c06d0-103f-42f3-919b-4d2f45656090.jpg?v=1784486573","url":"https:\/\/www.goodvibesmarina.com\/products\/taylor-made-1152-tuff-end-inflatable-round-boat-fender-white-21-in-diameter-112-lb-buoyancy","provider":"Good Vibes Marina","version":"1.0","type":"link"}