{"product_id":"taylor-made-products-1085-big-b-fender-hanger-3-pack-reinforced-nylon-rope-lock-for-3-8-rope-and-3-4-i-d-fender-tubes","title":"Taylor Made Products 1085 Big B Fender Hanger for 0.75 Inch I.D. Fender Tubing, Pack of 3","description":"\u003cp\u003eThe Taylor Made Products 1085 Big B Fender Hanger is a rope lock designed to secure boat fenders onto their mounting line so they hang firmly in place along the hull. It is built for use on Taylor Made fenders with 0.75-inch internal diameter tubing and accepts rope up to 0.375-inch (3\/8 inch) in diameter. Each hanger is molded from injection-molded, reinforced nylon for long-term durability in a marine environment, and the housing is vented to keep water from accumulating inside the fender tube, which helps extend the service life of both the hanger and the fender. Internal teeth grip the rope securely once the two halves of the hanger are closed around it, holding the fender at the height you set on the line. The 1085 is sold as a pack of three, giving you enough hangers to outfit multiple fenders or keep spares on hand. While designed for Taylor Made fenders, the hanger is also compatible with fenders from other brands as long as the center tube is small enough for the two halves to close firmly together. It is finished in white to blend with typical fender and hull colors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Taylor Made Products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 1085\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Injection-molded reinforced nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 3 fender hangers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFender Tube Compatibility:\u003c\/strong\u003e 0.75 inch (3\/4 inch) internal diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter Compatibility:\u003c\/strong\u003e Up to 0.375 inch (3\/8 inch) diameter rope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVenting:\u003c\/strong\u003e Vented to prevent water accumulation in the fender tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 040011949677\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits Taylor Made fenders with 0.75-inch internal diameter tubing and rope up to 0.375 inch in diameter. Also compatible with fenders from other brands provided the center tube is small enough for the hanger halves to close firmly together.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Taylor Made 1085 Big B Fender Hanger used for?\u003c\/strong\u003e The Taylor Made Products 1085 is a rope lock that clips onto a fender's hanging line and grips the rope so the fender stays at the height you set, rather than sliding up and down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat rope diameter does the 1085 fender hanger fit?\u003c\/strong\u003e It fits rope up to 0.375 inch (3\/8 inch) in diameter; the internal teeth grip the rope once the two halves of the 1085 are closed around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 1085 fit any boat fender?\u003c\/strong\u003e It is designed for Taylor Made fenders with 0.75-inch internal diameter tubing, and it is also compatible with fenders from other brands as long as the center tube is small enough for the hanger's two halves to close firmly together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many fender hangers come in a pack?\u003c\/strong\u003e The Taylor Made 1085 is sold in a pack of three fender hangers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 1085 fender hanger made from?\u003c\/strong\u003e It is made of injection-molded, reinforced nylon, chosen for long-term durability in marine use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the fender hanger vented?\u003c\/strong\u003e The 1085 is vented to prevent water from accumulating inside the fender tube, which helps the hanger and fender last longer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does one fender hanger weigh?\u003c\/strong\u003e Each Taylor Made 1085 fender hanger weighs 0.08 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is the Taylor Made 1085 fender hanger?\u003c\/strong\u003e It is white, matching the color of most fenders and hull trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 1085 easy to install on an existing fender line?\u003c\/strong\u003e Yes, the 1085 clips onto the rope by closing its two nylon halves around the line at the desired height, gripping via internal teeth without needing tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Taylor Made 1085 genuine Taylor Made Products or aftermarket?\u003c\/strong\u003e The 1085 is a genuine Taylor Made Products part, identified by manufacturer part number 1085 and UPC 040011949677.\u003c\/p\u003e","brand":"Taylor Made Products","offers":[{"title":"Default Title","offer_id":48989664772315,"sku":"NAT-1085","price":13.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__19624.1757597288.500.750.jpg?v=1785189089","url":"https:\/\/www.goodvibesmarina.com\/products\/taylor-made-products-1085-big-b-fender-hanger-3-pack-reinforced-nylon-rope-lock-for-3-8-rope-and-3-4-i-d-fender-tubes","provider":"Good Vibes Marina","version":"1.0","type":"link"}