{"product_id":"tie-down-engineering-26408-male-t-connector-for-floating-dock-systems-commercial-grade","title":"Tie Down Engineering Male T Connector, Commercial Grade with 3\/4 in. Tab, Part 26408","description":"\u003cp\u003eThe Tie Down Engineering Male T Connector, part number 26408, is a Commercial Grade dock hardware fitting used to join dock sections, fingers, and ramps into a stable connection point. It is built with a single welded 3\/4 in. Tab that mates with a Female T Connector to create the joint, and it uses a.562 in. Square hole pattern spaced 3.5 in. On center to match Commercial Grade dock framing. This Male T Connector measures 5 x 5 x 1 inches and weighs 2.7 pounds, giving it the mass and bearing surface needed for repeated foot traffic and boat loading at a marina or private dock. A bolt set (bolt set \"N\") is required to complete the joint and is ordered separately. Because this is the Commercial Grade version, it is sized and drilled to work with other Commercial Grade Tie Down Engineering dock hardware rather than the Standard Grade line, which uses a smaller.438 in. Hole pattern. This connector is intended for dock builders and marina maintenance crews assembling or repairing modular floating or fixed dock systems, anywhere a finger, ramp, or side section needs to attach at a T-shaped junction. Pair it with the matching Female T Connector to complete the connection.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 26408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Commercial Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTab:\u003c\/strong\u003e One welded 3\/4 in. Tab\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Pattern:\u003c\/strong\u003e.562 in. Square holes, 3.5 in. On center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 5 x 5 x 1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628264081\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal Commercial Grade dock hardware; designed to connect with Tie Down Engineering Commercial Grade dock sections, fingers, and ramps using the.562 in. Square hole pattern on 3.5 in. Centers.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Tie Down Engineering Male T Connector used for?\u003c\/strong\u003e Part number 26408 is a Commercial Grade dock hardware fitting used to join dock sections, fingers, or ramps at a T-shaped connection point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size is the Male T Connector, part 26408?\u003c\/strong\u003e It measures 5 x 5 x 1 inches and weighs 2.7 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 26408 connector work with Standard Grade dock hardware?\u003c\/strong\u003e No. The 26408 is Commercial Grade with a.562 in. Square hole pattern on 3.5 in. Centers, which differs from the Standard Grade hole pattern of.438 in. Square holes, so it should be matched with other Commercial Grade components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the Male T Connector attach to the dock?\u003c\/strong\u003e It has one welded 3\/4 in. Tab that mates with a Female T Connector, and a bolt set (bolt set \"N\") is required to complete the joint; the bolt set is ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Female T Connector included with part 26408?\u003c\/strong\u003e No, part 26408 is the Male T Connector only. The mating Female T Connector is a separate part with its own part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hole spacing on the 26408 T Connector?\u003c\/strong\u003e The hole pattern is.562 in. Square holes spaced 3.5 in. On center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat grade is the Tie Down Engineering 26408 connector?\u003c\/strong\u003e It is the Commercial Grade version, built for heavier-duty dock applications than the Standard Grade line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many tabs does the Male T Connector have?\u003c\/strong\u003e The 26408 Male T Connector has one welded 3\/4 in. Tab.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a bolt set included with the Male T Connector?\u003c\/strong\u003e No. Joining the 26408 Male T Connector to a Female T Connector requires bolt set \"N\", which is purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Tie Down Engineering part?\u003c\/strong\u003e Yes, part 26408 is a genuine Tie Down Engineering Male T Connector, not an aftermarket equivalent.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991655723227,"sku":"T-D-26408","price":22.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/Untitled-1__48110.1763741653.500.750.jpg?v=1785188167","url":"https:\/\/www.goodvibesmarina.com\/products\/tie-down-engineering-26408-male-t-connector-for-floating-dock-systems-commercial-grade","provider":"Good Vibes Marina","version":"1.0","type":"link"}