{"product_id":"tie-down-engineering-86144-5-in-pvc-ribbed-wobble-roller-kit-fits-7-8-in-and-1-1-8-in-trailer-shafts-4-pack","title":"Tie Down Engineering Amber 5 Inch PVC Wobble Roller Kit, 86144, Fits 7\/8 Inch and 1-1\/8 Inch Shafts","description":"\u003cp\u003eThe Tie Down Engineering 86144 is an amber, 5 inch PVC wobble roller kit built to center a boat on its trailer while cushioning the hull during loading, launching, and transport. The ribbed roller surface provides added traction against slick hulls, helping the boat guide into position and resist slippage as it moves up or down the rollers. The cushioned contact surface absorbs shock during hitching and towing, and the ribbed wobble-roller design is also a practical alternative to trailer bunks at shallow launch ramps or in shallow water, where standard bunks can be difficult to use.\u003c\/p\u003e\u003cp\u003eKit 86144 fits shafts measuring 7\/8 inch and 1-1\/8 inch and includes two rollers along with the bushings, washers, and hog rings needed to complete a quick replacement. This is a replacement roller kit only; it is designed to install onto an existing wobble roller shaft and bracket assembly already mounted on the trailer, not to serve as a complete standalone assembly. The rollers are made of PVC for durability in wet, abrasive marine environments, and the amber color of part 86144 distinguishes it from the black version of this same roller, part 86419, which is sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 86144\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Amber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller Diameter:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Compatibility:\u003c\/strong\u003e 7\/8 inch and 1-1\/8 inch shafts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Two rollers, bushings, washers, and hog rings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.74 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 11.81 inches L x 14.02 inches W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628861440\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFits boat trailer wobble roller shafts measuring 7\/8 inch and 1-1\/8 inch in diameter.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cp\u003eNo specific OEM cross-reference numbers are listed for this kit.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat shaft sizes does the Tie Down Engineering 86144 wobble roller kit fit?\u003c\/strong\u003e The 86144 kit fits wobble roller shafts measuring 7\/8 inch or 1-1\/8 inch in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many rollers come in kit 86144?\u003c\/strong\u003e Kit 86144 includes two 5 inch amber PVC rollers, along with the bushings, washers, and hog rings needed to install them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat color is part number 86144?\u003c\/strong\u003e Part 86144 is the amber 5 inch version of this wobble roller; the same roller is also available in black under part number 86419.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 86144 kit include the roller shaft or bracket?\u003c\/strong\u003e No. The 86144 kit is a replacement roller kit only, designed to install onto a trailer's existing wobble roller shaft and bracket assembly rather than replace the entire assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the wobble roller made of?\u003c\/strong\u003e The 86144 roller kit is made of PVC, chosen for its durability in wet, abrasive marine environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 86144 wobble roller kit weigh?\u003c\/strong\u003e The complete kit weighs 5.74 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 86144 roller kit packaging?\u003c\/strong\u003e The 86144 kit measures approximately 11.81 inches long by 14.02 inches wide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat hardware is included for installing the 86144 rollers?\u003c\/strong\u003e Bushings, washers, and hog rings are included with the two rollers in kit 86144 for a quick, complete replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy does the 86144 roller have a ribbed surface?\u003c\/strong\u003e The ribbed surface on the 5 inch amber roller improves traction against the hull, helping guide the boat and reduce slippage during loading and unloading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the 86144 roller kit be used at shallow launch ramps?\u003c\/strong\u003e Yes. The ribbed wobble roller design offers an alternative to trailer bunks and can make loading easier at shallow ramps or in shallow water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs part 86144 the same as the black 86419 roller?\u003c\/strong\u003e No, they are different SKUs. Part 86144 is the amber 5 inch roller, while part 86419 is the same 5 inch roller in black.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":48991700353243,"sku":"T-D-86144","price":58.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/T-D-86144_lg__97831.1722514089.500.750.jpg?v=1785189119","url":"https:\/\/www.goodvibesmarina.com\/products\/tie-down-engineering-86144-5-in-pvc-ribbed-wobble-roller-kit-fits-7-8-in-and-1-1-8-in-trailer-shafts-4-pack","provider":"Good Vibes Marina","version":"1.0","type":"link"}