{"product_id":"tie-down-engineering-95035-4-fluke-anchor-240-lb-holding-capacity-for-boats-12-16-ft","title":"Tie Down Engineering 95035 #4 Fluke Anchor, 240 lb Holding Capacity for Boats 12-16 ft","description":"\u003cp\u003eThe Tie Down Engineering 95035 is a #4 fluke anchor built for boats in the 12-16 ft range, with a 240 lb rated holding capacity for everyday anchoring in a variety of bottom conditions. Fluke-style anchors like the 95035 use wide, angled flukes that dig into sand, mud, and similar bottoms to resist dragging once set, making them a common choice for small to mid-size runabouts, jon boats, and similar craft.\u003c\/p\u003e\u003cp\u003eThe 95035 features strong, wide flukes designed to penetrate quickly and firmly for maximum holding power. Its crown is fully welded, giving the anchor properly engineered angles for secure penetration and consistent setting. The entire anchor is hot-dip galvanized after fabrication, which coats every surface (including welds) in zinc for corrosion resistance in fresh and salt water. Each Tie Down Engineering anchor is marked with a model number that approximates its weight in pounds, so the 95035 designation corresponds to an anchor weighing approximately 4 pounds (actual shipping weight 4.11 pounds).\u003c\/p\u003e\u003cp\u003eMeasuring 17-1\/4 in. Long, 13 in. Wide, and 9 in. High, the 95035 is sized as a #4 model recommended for boats 12-16 ft in length. It is sold as a standalone anchor for boaters who need a durable, galvanized fluke anchor matched to their boat size and typical anchoring loads.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 95035\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fluke Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Size:\u003c\/strong\u003e #4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load \/ Holding Capacity:\u003c\/strong\u003e 240 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 12-16 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.11 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 17-1\/4 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 13 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-Dip Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628950359\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRecommended for boats 12-16 ft. In length\u003c\/li\u003e\n\u003cli\u003eRated for 240 lbs. Of holding capacity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Tie Down Engineering 95035 anchor designed for?\u003c\/strong\u003e The 95035 is a #4 model recommended for boats 12-16 ft. In length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much holding power does the 95035 anchor provide?\u003c\/strong\u003e The 95035 is rated for 240 lbs. Of holding capacity, based on its #4 model classification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 95035 anchor weigh?\u003c\/strong\u003e The Tie Down Engineering 95035 weighs 4.11 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 95035 fluke anchor?\u003c\/strong\u003e The 95035 measures 17-1\/4 in. Long, 13 in. Wide, and 9 in. High.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 95035 anchor made of and how is it finished?\u003c\/strong\u003e The 95035 is constructed of galvanized steel and is hot-dip galvanized after fabrication, coating all surfaces including welds for corrosion resistance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the crown of the 95035 anchor welded or cast?\u003c\/strong\u003e The 95035 has a fully welded crown, engineered with proper angles for secure penetration and holding power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the 95035 anchor marked with the number 4?\u003c\/strong\u003e Tie Down Engineering marks each anchor with a model number, such as the #4 designation on the 95035, that approximates the anchor's weight in pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of anchor is the 95035?\u003c\/strong\u003e The 95035 is a fluke-style anchor, using wide flukes that penetrate the bottom quickly and firmly for maximum holding power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the 95035 anchor hold up in saltwater use?\u003c\/strong\u003e Yes, the 95035 is hot-dip galvanized after fabrication, which provides corrosion resistance suited to saltwater and freshwater environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the Tie Down Engineering 95035?\u003c\/strong\u003e The 95035 is sold as a standalone fluke anchor; it does not include rope, chain, or a shackle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 95035 different from the larger 95040 anchor?\u003c\/strong\u003e The 95035 is the #4 model rated for 240 lbs. Holding capacity on boats 12-16 ft., while the larger #8 model is rated for 480 lbs. On boats 16-24 ft.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017660178651,"sku":"T-D-95035","price":38.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61oL3VrJW9L.jpg?v=1785331041","url":"https:\/\/www.goodvibesmarina.com\/products\/tie-down-engineering-95035-4-fluke-anchor-240-lb-holding-capacity-for-boats-12-16-ft","provider":"Good Vibes Marina","version":"1.0","type":"link"}