{"product_id":"tie-down-engineering-95045-super-hooker-anchor-13-740-lb-holding-power-boats-24-30-ft","title":"Tie Down Engineering 95045 Super Hooker Anchor #13, 740 lb Holding Power, Boats 24-30 ft","description":"\u003cp\u003eThe Tie Down Engineering 95045 is a #13 Super Hooker fluke anchor built for boats in the 24 to 30 foot range. It is designed as a lightweight, easy-to-stow primary anchor that still delivers strong holding power in sand and mud bottoms typical of coastal and inland waterways.\u003c\/p\u003e\u003cp\u003eThe anchor is hot-dipped galvanized for corrosion resistance in fresh and salt water. Its wide, strong flukes are engineered to penetrate the bottom quickly and firmly, and the fully welded crown configuration sets the flukes at the correct angle for maximum holding power and secure penetration once set. Rated holding power for the 95045 is 740 pounds.\u003c\/p\u003e\u003cp\u003eAt 14.76 pounds, the 95045 is manageable for hand deployment and retrieval on boats without a windlass, while remaining substantial enough to hold a boat of its recommended length range in typical anchoring conditions. Overall anchor height is 28-1\/4 inches, with a 21-1\/2 inch stock width and a 14-1\/4 inch fluke height.\u003c\/p\u003e\u003cp\u003eThis is the #13 model size in the Tie Down Engineering Super Hooker anchor lineup, positioned for boats from 24 feet up. Boaters with smaller craft should size down, and those with larger boats should size up within the Super Hooker line to match holding power to vessel length.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Tie Down Engineering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 95045\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Size:\u003c\/strong\u003e #13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolding Power:\u003c\/strong\u003e 740 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Boat Length:\u003c\/strong\u003e 24 to 30 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 28-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock Width:\u003c\/strong\u003e 21-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluke Height:\u003c\/strong\u003e 14-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hot-dipped galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 081628950458\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat size boat is the Tie Down Engineering 95045 anchor recommended for?\u003c\/strong\u003e The 95045, model size #13, is recommended for boats from 24 to 30 feet in length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much holding power does the 95045 Super Hooker anchor provide?\u003c\/strong\u003e The 95045 is rated for 740 pounds of holding power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the 95045 anchor weigh?\u003c\/strong\u003e The Tie Down Engineering 95045 weighs 14.76 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of the 95045 Super Hooker anchor?\u003c\/strong\u003e It measures 28-1\/4 inches in height, with a 21-1\/2 inch stock width and a 14-1\/4 inch fluke height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the 95045 anchor made from?\u003c\/strong\u003e The 95045 is made from alloy steel with a hot-dipped galvanized finish for corrosion resistance in fresh and salt water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the 95045 a fluke-style anchor?\u003c\/strong\u003e Yes, the 95045 Super Hooker is a fluke anchor with wide flukes designed to penetrate the bottom quickly and firmly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 95045 anchor's crown constructed?\u003c\/strong\u003e The 95045 uses a fully welded crown configuration that sets the flukes at the correct angle for secure penetration and maximum holding power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat model size number is stamped on this anchor?\u003c\/strong\u003e This anchor is model size #13, part number 95045, within the Tie Down Engineering Super Hooker line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I size up or down from the 95045 for a different boat length?\u003c\/strong\u003e Boats shorter than 24 feet should use a smaller Super Hooker model, while larger boats should move up to a bigger model size for adequate holding power; the 95045 is sized specifically for the 24 to 30 foot range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 95045 anchor include any accessories like chain or rope?\u003c\/strong\u003e The 95045 is the anchor itself; it does not include anchor rope or chain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat finish protects the 95045 anchor from rust?\u003c\/strong\u003e A hot-dipped galvanized finish is applied to the 95045 to resist corrosion during marine use.\u003c\/p\u003e","brand":"Tie Down Engineering","offers":[{"title":"Default Title","offer_id":49017660276955,"sku":"T-D-95045","price":129.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/512G5twEUVL.jpg?v=1785331040","url":"https:\/\/www.goodvibesmarina.com\/products\/tie-down-engineering-95045-super-hooker-anchor-13-740-lb-holding-power-boats-24-30-ft","provider":"Good Vibes Marina","version":"1.0","type":"link"}