{"product_id":"trac-69301-submersible-bilge-pump-dual-800-1100-gph-outlets-replaces-t10004","title":"TRAC 69301 Submersible Bilge Pump, Dual 800\/1100 GPH Outlets, Replaces T10004","description":"\u003cp\u003eThe TRAC 69301 is a submersible, self-priming 12V centrifugal bilge pump built to handle both 800 GPH and 1100 GPH flow rates from a single pump body. The pump body accepts both a 3\/4 inch and a 1-1\/8 inch screw-on outlet, so installers can choose the outlet size that matches their existing hose and thru-hull setup without swapping pumps. Each outlet is fitted with an O-ring, allowing the outlet to be rotated into position for easier hose routing without stripping the threads.\u003c\/p\u003e\u003cp\u003eThis pump uses a cartridge-style pump head that seats into a universal strainer base, making it straightforward to install in place of many existing bilge pumps or to retrofit into a new location. The strainer base is connection-compatible with Rule and Johnson\/Mayfair cartridge pumps, and its screw mounting holes match Rule, Johnson\/Mayfair, and Attwood Tsunami mounting patterns. A side-mounting option on the strainer base also allows installation in tight bilge spaces where a standard flat mount will not fit.\u003c\/p\u003e\u003cp\u003eThe TRAC 69301 is ignition protected, draws low power, and can run dry without damage to the pump. It is rated at 2.8 to 3.7A at 13.6V DC depending on outlet configuration and is designed to be wired through a 5 amp fuse. This pump meets ABYC, NMMA, Coast Guard, and ISO marine standards, and is backed by a 1 year manufacturer warranty. It is a manual (switch-operated) pump and does not include a built-in float switch.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TRAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 69301\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bilge Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 800 GPH (3\/4 inch outlet) or 1100 GPH (1-1\/8 inch outlet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 volt DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Draw:\u003c\/strong\u003e 3.7 amps at 13.6 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Rating:\u003c\/strong\u003e 5 amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Size:\u003c\/strong\u003e 3\/4 inch and 1-1\/8 inch dual thread-on outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Multi-color\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.68125 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666996100041\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e ABYC, NMMA, Coast Guard, ISO marine standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eDesigned for use in all watercraft as a submersible bilge pump; the universal strainer base fits Rule and Johnson\/Mayfair cartridge pumps, with mounting holes matching Rule, Johnson\/Mayfair, and Attwood Tsunami patterns.\u003c\/p\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eT10004\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rates does the TRAC 69301 bilge pump support?\u003c\/strong\u003e The TRAC 69301 supports two flow rates from one pump body: 800 GPH through its 3\/4 inch outlet or 1100 GPH through its 1-1\/8 inch outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the TRAC 69301 replace an older TRAC pump?\u003c\/strong\u003e Yes, the TRAC 69301 replaces the older TRAC part number T10004.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TRAC 69301 an automatic bilge pump with a float switch?\u003c\/strong\u003e No, the 69301 is a manual (switch-operated) pump; it does not include a built-in float switch and must be wired to a separate ON\/OFF switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the amperage draw of this pump?\u003c\/strong\u003e The TRAC 69301 draws 3.7 amps at 13.6 volts DC and is rated for a 5 amp fuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the TRAC 69301 bilge pump weigh?\u003c\/strong\u003e The TRAC 69301 weighs 0.68125 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the pump body made of?\u003c\/strong\u003e The TRAC 69301 bilge pump body is made of plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the TRAC 69301 fit an existing Rule or Attwood strainer base?\u003c\/strong\u003e The TRAC 69301's universal strainer base is connection-compatible with Rule and Johnson\/Mayfair cartridge pumps, and its screw mounting holes match Rule, Johnson\/Mayfair, and Attwood Tsunami mounting patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this pump be mounted in a tight bilge space?\u003c\/strong\u003e Yes, the strainer base on the TRAC 69301 includes a side-mounting option specifically for installation in tight spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TRAC 69301 safe to run without water in the bilge?\u003c\/strong\u003e Yes, this pump can run dry without damage, in addition to being ignition protected with a low power draw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat marine standards does the TRAC 69301 meet?\u003c\/strong\u003e The 69301 meets ABYC, NMMA, Coast Guard, and ISO marine standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the TRAC 69301?\u003c\/strong\u003e TRAC backs the 69301 bilge pump with a 1 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage does the TRAC 69301 run on?\u003c\/strong\u003e The TRAC 69301 is a 12 volt DC centrifugal bilge pump.\u003c\/p\u003e","brand":"Trac Outdoor","offers":[{"title":"Default Title","offer_id":49028252139739,"sku":"TRC-69301","price":34.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/trc-t10004_lg__23252.1558172172.500.750.jpg?v=1785165642","url":"https:\/\/www.goodvibesmarina.com\/products\/trac-69301-submersible-bilge-pump-dual-800-1100-gph-outlets-replaces-t10004","provider":"Good Vibes Marina","version":"1.0","type":"link"}