{"product_id":"trac-automatic-bilge-pump-800-1100-gph-3-4-inch-and-1-1-8-inch-outlet-model-69311","title":"TRAC Automatic Bilge Pump, 800\/1100 GPH, 3\/4 Inch and 1-1\/8 Inch Outlet, Model 69311","description":"\u003cp\u003eThe TRAC 69311 Automatic Bilge Pump is a submersible, self-priming 12V centrifugal pump built for continuous duty in the bilge of any watercraft. It ships with both a 3\/4 inch outlet rated at 800 GPH and a 1-1\/8 inch outlet rated at 1100 GPH, and the pump body accepts either screw-on outlet so you can match the flow rate and hose size to your boat. Each outlet uses an O-ring seal, allowing the fitting to be rotated into position without stripping the threads. An integrated internal float switch gives the pump automatic ON\/OFF operation as bilge water rises and falls, so it can be wired for hands-off use or paired with a 3-position AUTO\/OFF\/MANUAL panel switch.\u003c\/p\u003e\u003cp\u003eThe pump uses a cartridge-style head that separates from a universal strainer base, which is connection-compatible with Attwood Tsunami, Rule, and Johnson\/Mayfair cartridge pumps, and its screw mounting holes match Rule and Attwood Tsunami patterns, so it drops into existing mounting footprints for easy retrofitting. A side-mounting option on the strainer base also allows installation in tight bilge spaces. The pump is ignition protected, draws low power, and can run dry without damage. It meets ABYC, NMMA, U.S. Coast Guard, and ISO marine standards, and is covered by a 1 year manufacturer warranty. Recommended wiring uses 16 gauge marine-grade tinned wire with a 5 amp fuse installed in the positive lead near the battery.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TRAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 69311\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Bilge Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow Rate:\u003c\/strong\u003e 3\/4 inch outlet - 800 GPH, 1-1\/8 inch outlet - 1100 GPH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuse Rating:\u003c\/strong\u003e 5 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Draw:\u003c\/strong\u003e 3.7 Amps at 13.6 Volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet Sizes:\u003c\/strong\u003e 3\/4 inch and 1-1\/8 inch, each with an O-ring seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666996100126\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eThis automatic bilge pump is designed for use in all watercraft and is not limited to a specific make, model, or engine. The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson\/Mayfair cartridge pumps, and its screw mounting holes match Rule and Attwood Tsunami mounting patterns for straightforward retrofitting.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat flow rate does the TRAC 69311 bilge pump provide?\u003c\/strong\u003e The TRAC 69311 provides 800 GPH through its 3\/4 inch outlet or 1100 GPH through its 1-1\/8 inch outlet, since the pump body ships with both outlet sizes included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the 69311 turn on automatically when water enters the bilge?\u003c\/strong\u003e Yes. The TRAC 69311 has an internal integrated float switch that turns the pump ON and OFF automatically as bilge water rises and falls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outlet sizes come with this pump?\u003c\/strong\u003e Both a 3\/4 inch screw-on outlet and a 1-1\/8 inch screw-on outlet are included with the TRAC 69311, and each uses an O-ring seal so it can be rotated into position without stripping the threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this pump fit my existing bilge pump mounting base?\u003c\/strong\u003e The TRAC 69311's universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson\/Mayfair cartridge pumps, and its screw mounting holes match Rule and Attwood Tsunami mounting patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the 69311 bilge pump made of?\u003c\/strong\u003e The TRAC 69311 is constructed of plastic and is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the TRAC 69311 weigh?\u003c\/strong\u003e The TRAC 69311 automatic bilge pump weighs 0.9 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TRAC 69311 safe to run without water present?\u003c\/strong\u003e Yes, the TRAC 69311 can run dry without sustaining damage, which is a built-in feature of its cartridge-style pump head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fuse and wire gauge should I use when installing this pump?\u003c\/strong\u003e TRAC recommends a 5 amp fuse installed in the positive (brown) wire near the battery, using 16 gauge or heavier marine-grade tinned wire for the 69311's electrical connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the TRAC 69311 ignition protected?\u003c\/strong\u003e Yes, the TRAC 69311 automatic bilge pump is ignition protected and designed for a low power draw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat marine standards does this bilge pump meet?\u003c\/strong\u003e The TRAC 69311 meets ABYC, NMMA, U.S. Coast Guard, and ISO marine standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat warranty comes with the TRAC 69311?\u003c\/strong\u003e TRAC backs the 69311 automatic bilge pump with a 1 year manufacturer warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I install this pump in a tight space?\u003c\/strong\u003e Yes, the strainer base on the TRAC 69311 includes a side mounting option specifically for installation in tight bilge spaces.\u003c\/p\u003e","brand":"Trac Outdoor","offers":[{"title":"Default Title","offer_id":49028252205275,"sku":"TRC-69311","price":59.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/trc-t10012_lg__85870.1558172211.500.750.jpg?v=1785165645","url":"https:\/\/www.goodvibesmarina.com\/products\/trac-automatic-bilge-pump-800-1100-gph-3-4-inch-and-1-1-8-inch-outlet-model-69311","provider":"Good Vibes Marina","version":"1.0","type":"link"}