{"product_id":"trac-outdoors-g2-anchor-winch-second-switch-kit-69040-for-fisherman-25-and-pontoon-35-winches","title":"TRAC Outdoors G2 Anchor Winch Second Switch Kit 69040 for Fisherman 25 and Pontoon 35 Winches","description":"\u003cp\u003eThe TRAC Outdoors G2 Anchor Winch Second Switch Kit (part number 69040) adds a second control point to your electric anchor winch, letting you raise and lower anchor from a helm location or anywhere else on the boat that is more convenient than the winch itself. The kit works with TRAC G2 anchor winches in both fresh and salt water models, and is specifically compatible with the TRAC Fisherman 25 and Pontoon 35 G2 electric winches. The original switch mounted on the winch cover continues to function normally after installation, so you end up with two working control points instead of one.\u003c\/p\u003e\u003cp\u003eEverything needed for the installation is included in the box: a 24 foot pre-made wiring harness with connectors on both ends, a sealed marine-grade switch, a switch plate (bezel faceplate), and four mounting screws. Installation involves removing the winch cover, disconnecting the existing switch from the control unit, connecting the wiring harness to the winch housing switch and control unit, and running the harness to your chosen second switch location. A rectangular cutout measuring 1.25 inches wide by 2.25 inches high is required to mount the new switch, with four screw holes drilled using a 1\/8 inch drill bit. If the 24 foot harness is not long enough to reach your desired location, additional wire can be spliced in; if it is too long, the excess can be coiled and secured with cable ties.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e TRAC Outdoors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 69040\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Anchor Winch Second Switch Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e TRAC G2 Fisherman 25 and Pontoon 35 anchor winches (fresh and salt water models)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Sealed switch, switch plate (bezel faceplate), pre-made wiring harness with connectors, 4 mounting screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Harness Length:\u003c\/strong\u003e 24 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Cutout Size:\u003c\/strong\u003e 1.25 inches wide x 2.25 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size for Screw Holes:\u003c\/strong\u003e 1\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Type:\u003c\/strong\u003e Push button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e 1-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Type:\u003c\/strong\u003e Surface mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Dimensions:\u003c\/strong\u003e 1.5 x 3.5 x 8.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.54375 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 666996101154\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTRAC G2 Fisherman 25 anchor winch\u003c\/li\u003e\n\u003cli\u003eTRAC G2 Pontoon 35 anchor winch\u003c\/li\u003e\n\u003cli\u003eCompatible with all TRAC G2 anchor winches, fresh and salt water models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the TRAC G2 Anchor Winch Second Switch Kit (69040)?\u003c\/strong\u003e The kit includes a sealed marine-grade switch, a switch plate (bezel faceplate), a pre-made 24 foot wiring harness with connectors, and 4 mounting screws, so everything needed to add a second control point is in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich TRAC anchor winches work with this second switch kit?\u003c\/strong\u003e The TRAC G2 Anchor Winch Second Switch Kit 69040 is compatible with TRAC G2 anchor winches, including the Fisherman 25 and Pontoon 35 models, in both fresh and salt water versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I run the anchor winch from two switches at the same time?\u003c\/strong\u003e Yes, once the 69040 kit is installed the original switch on the winch cover keeps working, so you have two independent locations from which to operate the anchor winch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installing the second switch disable the switch on the winch itself?\u003c\/strong\u003e No, the switch mounted on the winch cover continues to operate normally after the TRAC 69040 second switch kit is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the wiring harness included with this kit?\u003c\/strong\u003e The wiring harness in the TRAC G2 Anchor Winch Second Switch Kit is 24 feet long, running from the winch control unit to your chosen second switch location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to cut to mount the second switch?\u003c\/strong\u003e A rectangular cutout measuring 1.25 inches wide by 2.25 inches high is required, with four screw holes drilled using a 1\/8 inch drill bit for the mounting screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if the 24 foot wiring harness is not long enough to reach my helm?\u003c\/strong\u003e If the included 24 foot harness on the 69040 kit does not reach your desired mounting location, you can splice in additional wire to extend it, or coil and cable-tie any excess if it is too long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this switch kit rated for saltwater use?\u003c\/strong\u003e Yes, the TRAC G2 Anchor Winch Second Switch Kit is designed to work with TRAC G2 anchor winches in both fresh and salt water models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the second switch made of?\u003c\/strong\u003e The switch and bezel faceplate in the TRAC 69040 kit are made of plastic and finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the TRAC G2 Anchor Winch Second Switch Kit weigh?\u003c\/strong\u003e The TRAC G2 Anchor Winch Second Switch Kit (69040) weighs 1.54375 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to remove the winch cover to install this kit?\u003c\/strong\u003e Yes, installing the 69040 second switch requires removing the winch cover and carefully disconnecting the existing switch from the control unit before connecting the new wiring harness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre mounting screws included with the second switch kit?\u003c\/strong\u003e Yes, the TRAC G2 Anchor Winch Second Switch Kit includes 4 screws for attaching the switch plate at the second location.\u003c\/p\u003e","brand":"Trac Outdoor","offers":[{"title":"Default Title","offer_id":49028250796251,"sku":"TRC-69040","price":42.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/2__27528.1756133917.500.750.jpg?v=1785165636","url":"https:\/\/www.goodvibesmarina.com\/products\/trac-outdoors-g2-anchor-winch-second-switch-kit-69040-for-fisherman-25-and-pontoon-35-winches","provider":"Good Vibes Marina","version":"1.0","type":"link"}