{"product_id":"turning-point-propellers-hub-kit-26-11200600-for-suzuki-dt-df-and-evinrude-johnson-outboard-propellers","title":"Turning Point Propellers Hub Kit #26 (11200600) for Suzuki DT\/DF and Evinrude\/Johnson Outboard Propellers","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit #26 (part number 11200600) is a replacement rubber hub kit used to re-fit a Turning Point stainless steel propeller onto the propeller shaft after the original hub has worn out or spun. The hub is the rubber bushing system inside a propeller that absorbs shock and allows the prop to slip slightly under sudden load, protecting the lower unit and shaft from damage on impact. Over time and use, this rubber component can wear, crack, or spin loose inside the propeller barrel, which shows up as a loss of thrust or a propeller that no longer engages the shaft properly. Hub Kit #26 replaces that worn hub so the existing propeller can be put back into service without buying a new prop.\u003c\/p\u003e\u003cp\u003eThis hub kit is sized for a 10-spline propeller shaft, with a 14-spline configuration for Evinrude\/Johnson applications. It is designed to fit Suzuki DT 2-stroke 20, 25, 25C, 30, and 30C outboards ('87 and newer) and Suzuki DF 4-stroke 25hp and 30hp outboards, as well as Evinrude\/Johnson 2-stroke 20hp, 25hp ('84 and newer), 25hp commercial ('93 and newer), 30hp ('84 and newer), and 35hp ('76 and newer) outboards. Confirm your propeller's hub kit number matches #26 before ordering, since hub kits are sized to a specific propeller barrel and are not universal across all Turning Point propellers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11200600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 26\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePropeller Shaft Spline:\u003c\/strong\u003e 10-spline (14-spline for Evinrude\/Johnson)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200182\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Evinrude Outboard Propellers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuzuki DT 2-stroke: 20hp, 25hp, 25C, 30hp, 30C ('87 and newer)\u003c\/li\u003e\n\u003cli\u003eSuzuki DF 4-stroke: 25hp, 30hp\u003c\/li\u003e\n\u003cli\u003eEvinrude\/Johnson 2-stroke: 20hp, 25hp ('84 and newer), 25hp commercial ('93 and newer), 30hp ('84 and newer), 35hp ('76 and newer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is Turning Point Hub Kit #26 used for?\u003c\/strong\u003e Hub Kit #26 (part number 11200600) replaces the worn rubber hub inside a compatible Turning Point propeller so the existing propeller can be reused instead of replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich outboards is Hub Kit #26 compatible with?\u003c\/strong\u003e This hub kit fits Suzuki DT 2-stroke 20hp, 25hp, 25C, 30hp, and 30C outboards ('87 and newer), Suzuki DF 4-stroke 25hp and 30hp outboards, and Evinrude\/Johnson 2-stroke 20hp, 25hp, 25hp commercial, 30hp, and 35hp outboards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit work with Evinrude and Johnson engines of any year?\u003c\/strong\u003e For Evinrude\/Johnson applications, Hub Kit #26 fits 25hp models from 1984 and newer, 25hp commercial models from 1993 and newer, 30hp models from 1984 and newer, and 35hp models from 1976 and newer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spline count does Hub Kit #26 use?\u003c\/strong\u003e Hub Kit #26 (11200600) is built for a 10-spline propeller shaft, with a 14-spline version used for Evinrude\/Johnson applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point Hub Kit #26 weigh?\u003c\/strong\u003e The Turning Point Hub Kit #26, part number 11200600, weighs 1.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Hub Kit #26 fit any Turning Point propeller?\u003c\/strong\u003e No. Hub kits are matched to a specific propeller barrel size, so only propellers designated for hub kit #26 will accept part number 11200600.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does a propeller hub kit actually replace?\u003c\/strong\u003e It replaces the rubber hub assembly inside the propeller barrel, which is the component that allows the propeller to slip under shock load and protect the drivetrain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs Hub Kit #26 a genuine Turning Point Propellers part?\u003c\/strong\u003e Yes, part number 11200600 is a genuine Turning Point Propellers hub kit, not an aftermarket equivalent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know if my propeller needs hub kit #26 versus a different hub kit?\u003c\/strong\u003e Check the hub kit number stamped on or specified for your propeller; only propellers designated for hub kit 26 will match part number 11200600.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Suzuki DF 4-stroke fitment apply to all horsepower ratings?\u003c\/strong\u003e For Suzuki DF 4-stroke outboards, Hub Kit #26 (11200600) is listed for 25hp and 30hp models only.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619018971,"sku":"TUR-26","price":33.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41WfgsFtFeL_5f790667-7cf7-44ec-bf1b-445b4b6fae2e.jpg?v=1785216021","url":"https:\/\/www.goodvibesmarina.com\/products\/turning-point-propellers-hub-kit-26-11200600-for-suzuki-dt-df-and-evinrude-johnson-outboard-propellers","provider":"Good Vibes Marina","version":"1.0","type":"link"}