{"product_id":"turning-point-propellers-hub-kit-500-for-yamaha-60-100hp-2-stroke-and-75-100hp-4-stroke-outboards-part-11500000","title":"Turning Point Propellers Hub Kit 500 for Yamaha 60-100HP 2-Stroke and 75-100HP 4-Stroke Outboards, Part 11500000","description":"\u003cp\u003eThe Turning Point Propellers Hub Kit 500 (part number 11500000) is a replaceable hub system that lets boaters swap propellers without buying a new hub every time. The kit's inner splines adapt directly to the engine's 13-spline prop shaft, while the outer hub accepts a range of interchangeable propellers, so a single hub kit can support multiple prop changes over the life of the outboard.\u003c\/p\u003e\u003cp\u003eInside the hub, corrosion-resistant brass splines absorb gear shock and reduce strain on the engine and drive during shifting and impact events such as striking debris. This shock-absorbing design also cuts down on propeller vibration, chatter, and the cracking or failure that can occur in a hub subjected to repeated stress. Because the hub itself takes the wear, boaters can replace just the hub kit instead of the entire propeller assembly, which lowers the long-term cost of propeller ownership.\u003c\/p\u003e\u003cp\u003eHub Kit 500 is built for Yamaha High Thrust T50 and FT60 outboards, Yamaha 2-stroke engines from 60 to 100 hp, and Yamaha 4-stroke engines from 75 to 100 hp, fitting engines with 4.25 inch or 4.75 inch gearcases. It is functionally compatible with Michigan Wheel XHS and Mercury Flo Torq hub kit systems and works with Turning Point, Mercury, Solas, and Michigan Wheel interchangeable propellers, while offering easier installation and improved durability and shock absorption compared to those systems. The kit pairs with propeller part number 21431911 for this Yamaha application.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Turning Point Propellers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 11500000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Kit Number:\u003c\/strong\u003e 500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Fitment:\u003c\/strong\u003e Yamaha High Thrust T50 and FT60; 2-stroke 60-100 hp; 4-stroke 75-100 hp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearcase Diameter:\u003c\/strong\u003e 4.25 inches or 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Shaft Spline Count:\u003c\/strong\u003e 13 spline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Propeller Part Number:\u003c\/strong\u003e 21431911\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Hub Kit Systems:\u003c\/strong\u003e Michigan Wheel XHS, Mercury Flo Torq\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Brass inner splines, corrosion-resistant hub construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 652480200496\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYamaha High Thrust T50 and FT60\u003c\/li\u003e\n\u003cli\u003eYamaha 2-stroke outboards, 60 to 100 hp\u003c\/li\u003e\n\u003cli\u003eYamaha 4-stroke outboards, 75 to 100 hp\u003c\/li\u003e\n\u003cli\u003eEngines with 4.25 inch or 4.75 inch gearcases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat outboards does the Turning Point Hub Kit 500 fit?\u003c\/strong\u003e Hub Kit 500, part number 11500000, fits Yamaha High Thrust T50 and FT60 outboards, Yamaha 2-stroke engines from 60 to 100 hp, and Yamaha 4-stroke engines from 75 to 100 hp on engines with a 4.25 inch or 4.75 inch gearcase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat propeller works with Hub Kit 500?\u003c\/strong\u003e Propeller part number 21431911 is the matching prop for the Turning Point Hub Kit 500 on its supported Yamaha engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the Turning Point Hub Kit 500 weigh?\u003c\/strong\u003e The Turning Point Hub Kit 500 (part 11500000) weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this hub kit interchangeable with Michigan Wheel or Mercury hub systems?\u003c\/strong\u003e Yes, Hub Kit 500 is compatible with Michigan Wheel XHS and Mercury Flo Torq hub kit systems, and it also works with Turning Point, Mercury, Solas, and Michigan Wheel interchangeable propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material are the hub splines made from?\u003c\/strong\u003e The inner splines of the Turning Point Hub Kit 500 are made from corrosion-resistant brass, which helps the hub hold up in a marine environment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy would I replace just the hub kit instead of the whole propeller?\u003c\/strong\u003e A hub kit like the Turning Point 11500000 absorbs gear shock and vibration so the hub wears instead of the propeller or drive components, letting you replace only the hub and reuse or swap propellers rather than buying an entirely new prop assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this hub kit come with a warranty?\u003c\/strong\u003e The Turning Point Hub Kit 500 is backed by a lifetime warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat problems does this hub kit prevent?\u003c\/strong\u003e Hub Kit 500 is designed to eliminate propeller vibration and chatter, prevent hub cracking and failure, and reduce gear shock and damage to the engine or drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many splines does the prop shaft need for this hub kit?\u003c\/strong\u003e The Turning Point Hub Kit 500 is built for a 13 spline prop shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Turning Point Hub Kit 500?\u003c\/strong\u003e The kit includes the complete hub assembly (part 11500000) with inner splines that fit the engine and an outer hub designed to accept compatible propellers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Turning Point Hub Kit 500 genuine Turning Point Propellers equipment?\u003c\/strong\u003e Yes, part number 11500000 is manufactured by Turning Point Propellers as hub kit number 500.\u003c\/p\u003e","brand":"Turning Point Propellers","offers":[{"title":"Default Title","offer_id":49031619444955,"sku":"TUR-500","price":52.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41JNo7N_04L.jpg?v=1785216028","url":"https:\/\/www.goodvibesmarina.com\/products\/turning-point-propellers-hub-kit-500-for-yamaha-60-100hp-2-stroke-and-75-100hp-4-stroke-outboards-part-11500000","provider":"Good Vibes Marina","version":"1.0","type":"link"}