{"product_id":"uflex-kitobdbr-03-dual-cylinder-dual-engine-connection-hose-kit-3-high-pressure-hoses-with-bend-restrictors","title":"Uflex KITOBDBR-03' Dual Cylinder\/Dual Engine Connection Hose Kit, 3 Foot Hose Length","description":"\u003cp\u003eThe Uflex KITOBDBR-03' is a dual cylinder\/dual engine connection hose kit built for hydraulic steering setups that require two separate hydraulic lines running to twin cylinders or twin engines. The kit includes two high pressure flexible hoses finished with pre-crimped brass fittings, so there is no need to source or crimp fittings separately during installation. Both ends of each hose are fitted with bend restrictors, which prevent the hose from kinking or collapsing at the connection point where it flexes during steering and engine movement -- a common failure point on hydraulic steering runs that lack this protection.\u003c\/p\u003e\u003cp\u003eThis kit is built with a 3 foot hose length, one of several lengths Uflex offers in this same hose kit series (2 foot, 2.5 foot, 3 foot, 4 foot, and 5 foot versions), so boaters can match the kit to the actual distance between their helm and their dual cylinder or dual engine hookup. It is recommended for use with all Uflex Silversteer series cylinders, making it a straightforward addition or replacement hose set for boats running Silversteer hydraulic steering. The complete kit weighs 2.1 pounds.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Uflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e KITOBDBR-03'\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Name:\u003c\/strong\u003e Dual Cylinder\/Dual Engine Connection Hose Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Length:\u003c\/strong\u003e 3 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Hoses:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e Pre-crimped brass fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Restrictors:\u003c\/strong\u003e Both ends of both hoses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Uflex Silversteer series cylinders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 702755033592\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Hydraulic Boat Steering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRecommended for use with all Uflex Silversteer series hydraulic steering cylinders in dual cylinder or dual engine configurations.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the hose length on the Uflex KITOBDBR-03' kit?\u003c\/strong\u003e The KITOBDBR-03' has a 3 foot hose length, which is one of five lengths Uflex offers in this same hose kit series (2 foot, 2.5 foot, 3 foot, 4 foot, and 5 foot).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cylinders is this hose kit compatible with?\u003c\/strong\u003e The KITOBDBR-03' is recommended for use with all Uflex Silversteer series hydraulic steering cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many hoses are included in the kit?\u003c\/strong\u003e Two high pressure flexible hoses are included, sized for dual cylinder or dual engine connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat type of fittings does the KITOBDBR-03' use?\u003c\/strong\u003e Each hose comes with pre-crimped brass fittings already installed, so no separate crimping is required during setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit include bend restrictors?\u003c\/strong\u003e Yes, bend restrictors are fitted to both ends of both hoses in the KITOBDBR-03' kit to prevent kinking where the hose flexes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the KITOBDBR-03' hose kit weigh?\u003c\/strong\u003e The complete kit weighs 2.1 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this kit meant for a single cylinder or a dual setup?\u003c\/strong\u003e The KITOBDBR-03' is a dual cylinder\/dual engine connection kit, designed for hydraulic steering systems running two engines or two cylinders rather than a single station.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I know which length hose kit to order?\u003c\/strong\u003e Measure the actual run needed between the helm pump and the dual cylinder or dual engine hookup, then choose from the 2 foot, 2.5 foot, 3 foot, 4 foot, or 5 foot KITOBDBR kits; this listing is the 3 foot version, KITOBDBR-03'.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box with the KITOBDBR-03' kit?\u003c\/strong\u003e The kit includes two high pressure flexible hoses, each with pre-crimped brass fittings and bend restrictors on both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the KITOBDBR-03' a genuine Uflex part?\u003c\/strong\u003e Yes, the KITOBDBR-03' is a genuine Uflex hose kit, part of Uflex's dual cylinder\/dual engine connection hose kit lineup.\u003c\/p\u003e","brand":"Uflex","offers":[{"title":"Default Title","offer_id":48991096897755,"sku":"UFX-KITOBDBR-03","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/41yUfKVqE5L.jpg?v=1784491416","url":"https:\/\/www.goodvibesmarina.com\/products\/uflex-kitobdbr-03-dual-cylinder-dual-engine-connection-hose-kit-3-high-pressure-hoses-with-bend-restrictors","provider":"Good Vibes Marina","version":"1.0","type":"link"}