{"product_id":"water-pump-kit-with-housing-46-02855-for-evinrude-johnson-outboards-replaces-oem-394711-386697","title":"EMP Water Pump Kit with Housing, Replaces 394711, 386697, 391698, 389112, 387610, Evinrude Outboard","description":"\u003cp\u003eThe EMP 46-02855 Water Pump Kit with Housing is a complete replacement water pump assembly built for Evinrude outboard motors. The kit is supplied with the housing already included, along with the impeller and mounting hardware needed to complete the pump rebuild, so the cooling system can be restored without hunting down separate components. A worn or cracked water pump housing, a glazed impeller, or corroded mounting bolts are common causes of overheating in outboard engines, and this kit addresses all three points at once by pairing a new housing with a fresh impeller and stainless steel bolts.\u003c\/p\u003e\u003cp\u003eInside the kit is the impeller (O.E. 386084) that does the actual work of pumping raw water through the cooling passages, along with two stainless steel bolts (O.E. 319126) used to secure the assembly. Stainless steel hardware is used specifically because the water pump housing sits in a wet, corrosive environment below the waterline, and standard fasteners would rust and seize over time. The kit cross-references to a wide range of original Evinrude water pump part numbers, making it a straightforward drop-in replacement for the OEM assemblies it replaces.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e EMP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 46-02855\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Type:\u003c\/strong\u003e Water Pump Kit with Housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Water pump housing, impeller, stainless steel mounting bolts (Qty 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller O.E. Number:\u003c\/strong\u003e 386084\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bolt O.E. Number:\u003c\/strong\u003e 319126 (Qty 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Bolt Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.431 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Evinrude outboard motors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEvinrude outboard motors\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eReplaces (OEM)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e394711\u003c\/li\u003e\n\u003cli\u003e386697\u003c\/li\u003e\n\u003cli\u003e391698\u003c\/li\u003e\n\u003cli\u003e389112\u003c\/li\u003e\n\u003cli\u003e387610\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the EMP 46-02855 water pump kit include?\u003c\/strong\u003e The kit includes a water pump housing, an impeller (O.E. 386084), and two stainless steel mounting bolts (O.E. 319126), giving you everything needed to rebuild the pump assembly in one package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich OEM part numbers does this kit replace?\u003c\/strong\u003e EMP 46-02855 replaces OEM numbers 394711, 386697, 391698, 389112, and 387610, so any of those part numbers can be cross-referenced to this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this kit come with the housing already installed?\u003c\/strong\u003e Yes, the housing is included as part of the kit rather than sold separately, along with the impeller and mounting bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the impeller's OEM part number in this kit?\u003c\/strong\u003e The impeller included in EMP 46-02855 carries OEM part number 386084.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many mounting bolts come with the kit, and what are they made of?\u003c\/strong\u003e Two stainless steel mounting bolts (OEM 319126) are included with the EMP 46-02855 kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy are the mounting bolts stainless steel instead of standard steel?\u003c\/strong\u003e Stainless steel is used because the water pump housing operates below the waterline in a corrosive marine environment, and standard fasteners would corrode and seize over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does this water pump kit weigh?\u003c\/strong\u003e The EMP 46-02855 water pump kit weighs 0.431 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat outboard motors is this water pump kit designed for?\u003c\/strong\u003e EMP 46-02855 is built for Evinrude outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs EMP 46-02855 an OEM or aftermarket part?\u003c\/strong\u003e EMP 46-02855 is an aftermarket replacement kit engineered to match the fit and function of the OEM numbers it replaces (394711, 386697, 391698, 389112, 387610).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat signs indicate my water pump housing needs replacing?\u003c\/strong\u003e Overheating, reduced or no water discharge from the tell-tale, and a cracked or worn housing are common signs that a water pump kit like the EMP 46-02855 is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I use just the impeller from this kit without the housing?\u003c\/strong\u003e The EMP 46-02855 is sold as a complete kit with housing, impeller, and bolts together rather than as individual components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this kit fit if my old pump has a different OEM number than 394711?\u003c\/strong\u003e Yes, as long as your old part number matches one of the OEM numbers this kit replaces (394711, 386697, 391698, 389112, 387610), EMP 46-02855 is the correct replacement.\u003c\/p\u003e","brand":"EMP","offers":[{"title":"Default Title","offer_id":48991289508059,"sku":"EMP-46-02855","price":41.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/EMP-46-02855-BRP-water-pump-kit-with-housing__31274.1722355606.500.750.jpg?v=1785329114","url":"https:\/\/www.goodvibesmarina.com\/products\/water-pump-kit-with-housing-46-02855-for-evinrude-johnson-outboards-replaces-oem-394711-386697","provider":"Good Vibes Marina","version":"1.0","type":"link"}