{"product_id":"whitecap-industries-90-degree-thru-hull-fitting-with-barb-stainless-steel-and-nylon-1-1-4-inch-hose-s-3811c","title":"Whitecap Industries S-3811C 90 Degree Thru-Hull Fitting with Barb, 1-1\/4 Inch Hose Size, Stainless Steel\/Nylon","description":"\u003cp\u003eThe Whitecap Industries S-3811C is a 90 degree thru-hull fitting with barb, built from stainless steel and nylon for corrosion resistance in marine environments. It is designed to pass a hose through a boat hull at a right angle, letting the hose run flat against an interior surface instead of requiring a straight run out through the hull, which is useful in tight bilge, livewell, washdown, and drain plumbing installations where space behind the hull is limited.\u003c\/p\u003e\u003cp\u003eThe barb end accepts a 1-1\/4 inch hose and is secured with a hose clamp (not included), while the flange seats against the hull with a 2-3\/8 inch outer diameter for a solid mounting surface. Overall length is 4 inches with a thread length of 1-5\/8 inches and a barb length of 1-1\/2 inches, and the fitting requires a 1-1\/2 inch cutout in the hull for installation. The stainless steel and nylon construction is intended to resist saltwater corrosion over repeated exposure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whitecap Industries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e S-3811C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Thru-Hull Fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose Size:\u003c\/strong\u003e 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange Outer Diameter:\u003c\/strong\u003e 2-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 1-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarb Length:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutout Diameter:\u003c\/strong\u003e 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Dimensions:\u003c\/strong\u003e 6.75 x 3 x 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 stainless steel and nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725060381110\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat hose size does the S-3811C thru-hull fitting accept?\u003c\/strong\u003e The Whitecap Industries S-3811C accepts a 1-1\/4 inch hose on its barb end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this thru-hull fitting straight or angled?\u003c\/strong\u003e The S-3811C is a 90 degree thru-hull fitting, so the hose barb sits at a right angle to the hull rather than running straight out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size hole do I need to cut in the hull?\u003c\/strong\u003e A 1-1\/2 inch cutout is required in the hull to install the S-3811C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Whitecap S-3811C made from?\u003c\/strong\u003e It is constructed of 316 stainless steel and nylon, materials chosen for resistance to marine corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the overall length of this fitting?\u003c\/strong\u003e The overall length of the Whitecap Industries S-3811C is 4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the flange outer diameter?\u003c\/strong\u003e The flange outer diameter on the S-3811C is 2-3\/8 inches, which is the surface that seats against the hull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long is the barb on this fitting?\u003c\/strong\u003e The barb length on the S-3811C is 1-1\/2 inches, with a thread length of 1-5\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much does the S-3811C weigh?\u003c\/strong\u003e The Whitecap Industries S-3811C weighs 0.5 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the S-3811C come with a hose clamp?\u003c\/strong\u003e The listed specifications for the S-3811C cover only the thru-hull fitting itself; a hose clamp is used to secure the hose to the barb but is a separate item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the UPC for this part?\u003c\/strong\u003e The UPC for the Whitecap Industries S-3811C is 725060381110.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat applications is this fitting typically used for?\u003c\/strong\u003e The 90 degree design of the S-3811C makes it suited to plumbing runs such as bilge, livewell, washdown, or drain lines where a right-angle hull penetration is needed instead of a straight-through fitting.\u003c\/p\u003e","brand":"Whitecap Industries","offers":[{"title":"Default Title","offer_id":49025296564443,"sku":"W-C-S-3811C","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/61JX-ZWEmfL.jpg?v=1785331048","url":"https:\/\/www.goodvibesmarina.com\/products\/whitecap-industries-90-degree-thru-hull-fitting-with-barb-stainless-steel-and-nylon-1-1-4-inch-hose-s-3811c","provider":"Good Vibes Marina","version":"1.0","type":"link"}