{"product_id":"whitecap-teak-iphone-holder-marine-grade-wood-phone-mount-part-63272","title":"Whitecap 63272 Premium Grade Teak iPhone Holder with Pre-Drilled Mounting Holes","description":"\u003cp\u003eThe Whitecap 63272 is a solid teak phone holder built to keep a phone secure and accessible on a boat or anywhere else moisture and sun exposure are a concern. It is made from 100% solid, premium grade teak that Whitecap guarantees for year-round indoor or outdoor use, so it stands up to marine conditions without the finish breaking down over time.\u003c\/p\u003e\u003cp\u003eThe holder measures 3 inches wide, 4-3\/16 inches tall, and 1 inch deep on the outside, with an interior cutout of 2-1\/2 inches wide, 4 inches tall, and 1\/2 inch deep. That interior pocket is sized to hold a phone with or without a protective case, so it accommodates most everyday cases without needing to remove them first. A charging cable cutout is built into the bottom of the holder, allowing a phone to stay plugged in and charging while it sits in the mount.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward thanks to pre-drilled mounting holes, letting it be screwed directly to a wall, console, or other flat surface without additional drilling. The natural teak grain and finish match the look of other teak hardware and trim commonly used in boat interiors and helm areas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Whitecap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 63272\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% solid, premium grade teak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Width:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Height:\u003c\/strong\u003e 4-3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Depth:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Width:\u003c\/strong\u003e 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Height:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Depth:\u003c\/strong\u003e 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Pre-drilled mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e iPhones, holds phone with or without a protective case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 725060632724\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the Whitecap 63272?\u003c\/strong\u003e The Whitecap 63272 is a solid teak iPhone holder designed to mount to a wall or flat surface and hold a phone securely, whether or not it is in a protective case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions of this teak phone holder?\u003c\/strong\u003e The Whitecap 63272 measures 3 inches wide, 4-3\/16 inches tall, and 1 inch deep on the outside, with an interior pocket that is 2-1\/2 inches wide, 4 inches tall, and 1\/2 inch deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I charge my phone while it sits in the holder?\u003c\/strong\u003e Yes, the Whitecap 63272 has a charging cable cutout built into the bottom of the holder so a phone can stay connected to a charger while mounted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit a phone in a case?\u003c\/strong\u003e The interior of the 63272 holds a phone with or without a protective case, since the 2-1\/2 inch by 4 inch opening is sized to accommodate common case thicknesses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is the Whitecap 63272 made from?\u003c\/strong\u003e It is made from 100% solid, premium grade teak, a wood Whitecap guarantees for year-round indoor or outdoor use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this holder suitable for outdoor marine use?\u003c\/strong\u003e Yes, the solid teak construction of the Whitecap 63272 is guaranteed by Whitecap for 100% year-round indoor and outdoor use, making it suitable for boat interiors and other exposed locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the 63272 installed?\u003c\/strong\u003e The Whitecap 63272 comes with pre-drilled mounting holes, so it can be attached directly to a wall, console, or other flat surface with screws without additional drilling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the weight of the Whitecap 63272?\u003c\/strong\u003e The Whitecap 63272 teak iPhone holder weighs 2 pounds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the Whitecap 63272?\u003c\/strong\u003e The Whitecap 63272 ships as a single pre-drilled teak phone holder unit; mounting hardware and phone are not part of the holder itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the Whitecap 63272 genuine Whitecap hardware?\u003c\/strong\u003e Yes, part number 63272 is a genuine Whitecap product made from premium grade teak, matching Whitecap's other teak accessory hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this holder work with phones other than an iPhone?\u003c\/strong\u003e The Whitecap 63272 is designed and sized for iPhones, with an interior cutout built around iPhone dimensions.\u003c\/p\u003e","brand":"Whitecap Industries","offers":[{"title":"Default Title","offer_id":49025295843547,"sku":"W-C-63272C","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/7586\/4539\/files\/63272IMAGE1_700x_9711510f-2d99-45c6-8709-8ced1622c581.webp?v=1785001774","url":"https:\/\/www.goodvibesmarina.com\/products\/whitecap-teak-iphone-holder-marine-grade-wood-phone-mount-part-63272","provider":"Good Vibes Marina","version":"1.0","type":"link"}