AFI 37100 1000 Series Waterproof Wiper Kit, 12V, 2.5 Inch Shaft, 80 Degree Sweep

The AFI 37100 1000 Wiper Kit is an 80 degree sweep set built around the 1000 Series waterproof wiper motor. The motor housing is fully sealed and made of UV stabilized, high-temperature, high-impact thermoplastic, so it holds up to constant exposure to sun, spray, and washdown. It is designed to power an 18 inch Deluxe arm and 18 inch Deluxe blade combination at sweep settings of 80 degree or less, or a 16 inch Deluxe arm and 16 inch Deluxe blade combination at a 110 degree sweep setting. The sweep is factory pre-set to 80 degree or 110 degree and is field adjustable to 50 degree, 65 degree, 80 degree, or 110 degree, giving installers flexibility to match the arc to the windshield.

The motor uses a 0.625 inch (16 mm) diameter shaft with a knurled drive shaft and a solid brass arm drive nut, plus anti-rotation drive shaft construction to keep the arm secure under load. It coasts to park with self parking that is adjustable to right or left. RF shielded circuitry helps limit electrical interference with onboard electronics. This retail version includes a 5 amp fuse and fuse holder (an on/off switch is not included). This kit is the 2.5 inch shaft configuration.

Specifications

• Brand: AFI
• Manufacturer Part Number: 37100
• Voltage: 12 volts
• Shaft Diameter: 0.625 inch (16 mm)
• Shaft Length: 2.5 inches (includes 0.5 inch length of knurled arm fitting)
• Sweep Angle: Factory pre-set 80 degree, adjustable to 50 degree, 65 degree, 80 degree, or 110 degree
• Arm and Blade Compatibility: 18 inch Deluxe arm and blade combination at 80 degree sweep or less, or 16 inch Deluxe arm and blade combination at 110 degree sweep
• Park Type: Coast to park, adjustable right or left self parking
• Drive Shaft: Knurled drive shaft with solid brass arm drive nut, anti-rotation
• Circuitry: RF shielded
• Fuse: 5 amp fuse and holder included (on/off switch not included)
• Housing Material: UV stabilized, high-temperature, high-impact thermoplastic, fully sealed waterproof housing
• Stall Torque: 55 in-lbs (63 kgf/cm; 6.2 Nm)
• Stall Current: 9.8 to 10.0 amps
• No Load Current: 0.8 to 1.2 amps
• Dimensions: 6.625 inches L x 3.375 inches W x 2 inches D
• Weight: 2.7 pounds
• UPC: 035028371009

Frequently Asked Questions

What is the AFI 37100 wiper kit designed to do? The AFI 37100 1000 Wiper Kit is an 80 degree sweep set built on the 1000 Series waterproof wiper motor, factory pre-set to an 80 degree or 110 degree sweep and field adjustable to 50 degree, 65 degree, 80 degree, or 110 degree.

Is the AFI 37100 motor waterproof? Yes, the motor housing on the AFI 1000 Wiper Kit (part number 37100) is fully sealed and made of UV stabilized, high-temperature, high-impact thermoplastic for protection against water and sun exposure.

What shaft size does the AFI 37100 use? The 37100 uses a 0.625 inch (16 mm) diameter shaft, and this kit is the 2.5 inch shaft length configuration.

What voltage does the AFI 37100 wiper motor run on? The AFI 37100 is a 12 volt wiper motor.

What size arm and blade does the AFI 37100 kit support? It powers an 18 inch Deluxe arm and 18 inch Deluxe blade combination at sweep settings of 80 degree or less, or a 16 inch Deluxe arm and 16 inch Deluxe blade combination at a 110 degree sweep setting.

Does the AFI 37100 include a fuse? This retail version of the AFI 37100 includes a 5 amp fuse and fuse holder; an on/off switch is not included in the kit.

Can the wiper park on either side? Yes, the AFI 37100 coasts to park and the self parking is adjustable to right or left.

What is the stall torque and current draw of the AFI 37100 motor? The motor has a stall torque of 55 in-lbs (63 kgf/cm; 6.2 Nm), a stall current of 9.8 to 10.0 amps, and a no load current of 0.8 to 1.2 amps.

How much does the AFI 37100 wiper kit weigh? The AFI 37100 1000 Wiper Kit weighs 2.7 pounds.

What are the dimensions of the AFI 37100 wiper motor? The AFI 37100 measures approximately 6.625 inches long by 3.375 inches wide by 2 inches deep.

Does the AFI 37100 have interference shielding? Yes, the AFI 1000 Wiper Kit (37100) has RF shielded circuitry to help limit electrical interference.

What drive shaft hardware does the AFI 37100 use? The 37100 uses a knurled drive shaft with a solid brass arm drive nut and anti-rotation drive shaft construction to keep the arm secure.