AFI Stainless Steel Mini Twin Electric Boat Horn, 12 Volt, 109 dB, Dual Sealed Sound Units

The AFI Stainless Steel Mini Twin Electric Boat Horn is a compact dual-horn unit built for boaters who want a loud, reliable signal without a bulky footprint. It houses two totally sealed sound units, each fully enclosed to keep moisture and salt spray out of the internal mechanism, a common failure point on unsealed horns exposed to marine conditions. The covers, diaphragms, and mounting bracket are all made from type 304 stainless steel, giving the horn corrosion resistance suited to saltwater and freshwater environments alike.

Running on a 12 volt system, the horn draws a maximum of 6 amps and produces a sound output rated at 109 decibels at one meter, putting it in range for use as a signaling device on boats where a clear, audible warning is needed. Its small footprint, 3 inches long, 8 inches wide, and 1.75 inches high, allows installation in tight helm areas, behind panels, or other spaces where a full-size single or dual trumpet horn will not fit. The stainless steel construction throughout means the horn is intended to hold up over repeated exposure to weather and spray without the surface corrosion that affects painted or plastic housings.

Specifications

• Brand: AFI
• Manufacturer Part Number: 10001
• Product Type: Mini Twin Electric Boat Horn
• Voltage: 12 Volts
• Maximum Amperage Draw: 6 amps
• Decibel Rating: 109 dB at one meter
• Dimensions: 3 inches L x 8 inches W x 1.75 inches H
• Material: Type 304 Stainless Steel (covers, diaphragms, and mounting bracket)
• Sound Units: Two, totally sealed
• Weight: 1.875 pounds
• UPC: 035028100012

Fitment

Universal fit; not restricted to a specific make, model, or engine.

Replaces (OEM)

• AFI10001

Frequently Asked Questions

How loud is the AFI Mini Twin Electric Boat Horn? The AFI Mini Twin Electric Boat Horn (part number 10001) is rated at 109 decibels at one meter, produced by its two sealed sound units working together.

What voltage and amp draw does this horn need? This horn runs on a 12 volt system and draws a maximum of 6 amps, so it should be wired to a circuit sized to handle that load.

What are the dimensions of the AFI 10001 horn? The AFI Mini Twin Electric Boat Horn measures 3 inches long, 8 inches wide, and 1.75 inches high, making it a compact option for tight mounting locations.

Is this horn made of real stainless steel? Yes, the covers, diaphragms, and mounting bracket of AFI part number 10001 are all made from type 304 stainless steel for corrosion resistance in marine environments.

Does this horn fit any specific boat make or model? The AFI Mini Twin Electric Boat Horn is a universal-fit accessory and is not limited to a specific boat make, model, or engine type.

Why does the horn have two sound units instead of one? AFI's Mini Twin design uses two totally sealed sound units side by side, which allows it to reach a higher decibel rating (109 dB at one meter) than a comparable single-unit horn in the same compact footprint.

Is the sound unit sealed against water and spray? Yes, both sound units on the AFI 10001 horn are totally sealed, protecting the internal mechanism from moisture and salt spray.

What is included with the AFI Mini Twin Electric Boat Horn? The product is a complete horn assembly, including the two sealed sound units, stainless steel covers and diaphragms, and the stainless steel mounting bracket.

Is there an OEM equivalent number for this horn? AFI part number 10001 has an OEM equivalent listed as AFI10001, which can be used to confirm you are ordering the correct part.

How does this compare to AFI's other electric horn models? Compared to AFI's Single Trumpet and Dual Trumpet electric horns, the Mini Twin (part 10001) has a smaller footprint at 3 inches by 8 inches and a 109 dB rating, positioning it between the compact single trumpet and larger dual trumpet models in sound output.

Will this horn hold up in saltwater conditions? Because the AFI Mini Twin Electric Boat Horn uses type 304 stainless steel for its covers, diaphragms, and mounting bracket, and its sound units are totally sealed, it is built to resist corrosion in saltwater marine environments.