Attwood 14137-7 Cooler Mounting Kit with 4 Corner Pieces and 2 Quick-Connect Stretch Straps

The Attwood 14137-7 Cooler Mounting Kit secures a cooler to a boat deck or gunwale so it will not slide or shift while underway. The kit includes 4 plastic corner base pieces that cradle the bottom corners of the cooler, plus 2 quick-connect stretch straps that pull taut over the top to hold everything firmly in place. The quick-disconnect strap design makes it easy to release the straps when you need to open the cooler or remove it from the boat entirely, then reconnect them in seconds. Both the corner pieces and the elastic bungee-style straps are built to resist corrosion, making the kit suitable for continued exposure to marine conditions without rusting or breaking down. Installation is straightforward: the corner pieces fasten to the mounting surface with #8 screws, after which the cooler simply drops into place and the straps clip over the top. This is a one-size kit intended to work with a variety of cooler sizes and boat layouts rather than a single specific model, giving boat owners a simple way to keep a cooler from becoming a hazard in rough water or hard turns.

Specifications

• Brand: Attwood
• Manufacturer Part Number: 14137-7
• Product Type: Cooler Mounting Kit
• Included Components: 4 corner pieces, 2 quick-connect stretch straps
• Material: Plastic
• Mounting Type: Corner mount
• Item Dimensions: 8 x 12 x 3 inches
• Weight: 0.8 pounds
• Fastener Type: #8 screws
• Corrosion Resistance: Corrosion-resistant construction

Frequently Asked Questions

What is included in the Attwood 14137-7 Cooler Mounting Kit? The kit includes 4 plastic corner base pieces and 2 quick-connect stretch straps, everything needed to mount a cooler to a boat surface.

How does the cooler mounting kit attach to the boat? The 4 corner pieces fasten to the mounting surface using #8 screws, and the cooler then sits inside them, secured on top by the 2 stretch straps.

Is the Attwood 14137-7 mounting kit corrosion resistant? Yes, both the corner pieces and the straps of the 14137-7 kit are built to resist corrosion for continued use in a marine environment.

What material are the corner pieces made from? The corner base pieces in the Attwood 14137-7 kit are made from plastic.

Will the straps release easily to remove the cooler? Yes, the 14137-7 kit uses a quick-disconnect strap design so the elastic stretch straps can be unclipped and reconnected without tools.

What size cooler does the 14137-7 mounting kit fit? The Attwood 14137-7 is a one-size kit designed to accommodate a range of cooler sizes rather than one specific model.

What are the dimensions of the mounting kit? The Attwood 14137-7 Cooler Mounting Kit measures 8 x 12 x 3 inches as packaged.

How much does the cooler mounting kit weigh? The Attwood 14137-7 Cooler Mounting Kit weighs 0.8 pounds.

What screws are needed to install the mounting kit? The corner pieces of the 14137-7 kit are designed to be fastened down with #8 screws.

How many straps come with the Attwood 14137-7 kit? Two quick-connect stretch straps are included with the Attwood 14137-7 Cooler Mounting Kit, one for each side of the cooler.

Does the mounting kit prevent damage to the boat and cooler? Yes, by holding the cooler firmly in one spot, the 14137-7 kit helps prevent the cooler from sliding and causing damage to itself or the boat.

Are the corner pieces and straps sold separately? No, the Attwood 14137-7 is sold as a complete kit with all 4 corner pieces and both stretch straps included together.