Attwood 5040G7 Starboard Green Deck Mount Navigation Light, 1-Mile 112.5 Degree Visibility, Boats up to 39.4 ft

Attwood 5040G7 Starboard Green Deck Mount Navigation Light, 1-Mile 112.5 Degree Visibility, Boats up to 39.4 ft

$26.16
Skip to product information
Attwood 5040G7 Starboard Green Deck Mount Navigation Light, 1-Mile 112.5 Degree Visibility, Boats up to 39.4 ft

Attwood 5040G7 Starboard Green Deck Mount Navigation Light, 1-Mile 112.5 Degree Visibility, Boats up to 39.4 ft

$26.16

The Attwood 5040G7 is a starboard-side, green-lens deck mount navigation light built for boats up to 39.4 ft (12 meters). Its raised base lifts the light above rails and carpeting so it stays visible from other vessels, while a notch in the rear of the base lets wire leads pass through cleanly during installation. The black plastic cover and lens use a twist/bayonet lock design that secures firmly to the base, sealing out water from the lamp and hull while also concealing the mounting fasteners for a clean finish.

Each 5040G7 light delivers 1 nautical mile, 112.5 degree light visibility, meeting USCG requirements for a starboard sidelight. It comes with a 9-watt (#906) wedge base lamp already installed and 7 inch wire leads for connecting to a 12 Volt DC power supply. The light mounts directly to the deck using two #10 fasteners (not included) through pre-drilled holes in the base, and stainless steel electrical contacts resist corrosion in the marine environment. Because this is the starboard (green lens) light, it is not interchangeable with the port side; Attwood's matching red-lens light for the port side is sold separately as part number 5040R7.

Specifications

  • Brand: Attwood
  • Manufacturer Part Number: 5040G7
  • Side: Starboard
  • Lens Color: Green
  • Cover Color/Material: Black Plastic
  • Lens Material: Plastic
  • Mounting Type: Deck Mount, Raised Base
  • Base Diameter: 2-9/16 inches
  • Height: 2-3/8 inches
  • Wire Lead Length: 7 inches
  • Bulb Included: 9-watt (#906) wedge base lamp
  • Voltage: 12 Volts DC
  • Light Visibility: 1 nautical mile, 112.5 degree, USCG compliant
  • Maximum Boat Length: 39.4 feet (12 meters)
  • Fastener Requirement: Two #10 fasteners (not included)
  • Electrical Contacts: Stainless Steel
  • Item Dimensions: 6.5 x 9.75 x 5.75 inches
  • UPC: 022697009005
  • Weight: 0.2158 pounds
  • Companion Port-Side Light: Attwood 5040R7 (red lens, sold separately)

Fitment

  • Boats up to 39.4 feet (12 meters)

Frequently Asked Questions

Which side of the boat does the Attwood 5040G7 fit? The 5040G7 is a starboard-side navigation light with a green lens. It is not interchangeable with the port side; Attwood's matching red-lens light for the port side is a separate part, 5040R7.

What color is the lens on the 5040G7? Green. The green lens on the Attwood 5040G7 identifies it as the starboard sidelight, as required by navigation light color conventions.

Does the 5040G7 come with a bulb? Yes, the Attwood 5040G7 ships with a 9-watt (#906) wedge base lamp already installed, along with 7 inch wire leads for wiring to a 12 Volt DC power supply.

What voltage does this light run on? The Attwood 5040G7 operates on a 12 Volt DC marine electrical system.

How is the 5040G7 mounted? It is a deck mount light with a raised base that elevates it above rails and carpeting for better visibility. It installs with two #10 fasteners (not included) through pre-drilled holes in the base, which measures 2-9/16 inches in diameter.

What is the visibility rating of the Attwood 5040G7? 1 nautical mile at a 112.5 degree angle, meeting USCG visibility requirements for a starboard sidelight.

What size boats is the 5040G7 rated for? Attwood rates the 5040G7 for use on boats up to 39.4 feet (12 meters) in length.

What is the cover of the 5040G7 made from? The 5040G7 uses a black plastic cover and lens housing that twist/bayonet-lock onto the base to seal out water.

Are the electrical contacts on the 5040G7 corrosion resistant? Yes, the Attwood 5040G7 uses stainless steel electrical contacts, which resist corrosion in a marine environment.

How long are the wire leads on the 5040G7? The Attwood 5040G7 has 7 inch wire leads for connecting to the boat's 12 Volt DC power supply.

Is there a matching light for the other side of the boat? Yes. The Attwood 5040G7 covers the starboard (green lens) side; the port side (red lens) is a separate part number, 5040R7.

Is a stainless steel version of this light available? Yes, Attwood also offers a stainless steel base version of this deck mount light, part number 5040SS1, as an alternative to the black plastic 5040G7.

You may also like