Attwood 6522SS7 Stainless Steel LED Boat Docking Lights, White LED, Pair

The Attwood 6522SS7 is a pair of stainless steel LED docking lights built to make low-visibility docking and low-light maneuvering easier. Each light produces a cool white, 100 Lumen output in a broad pattern designed to illuminate the area around your hull rather than a narrow competing beam, so you can see the dock, pilings, and waterline clearly as you bring the boat in. The bezel is constructed of stainless steel for corrosion resistance in a marine environment, paired with a clear polycarbonate lens that protects the LED element while remaining water resistant for continuous outdoor exposure.

Installation requires only a small hole through the hull for the wiring, and the lights mount low profile and out of the way of foot traffic or lines. Each light runs on a 12 volt DC system and draws 5 watts, giving bright, efficient illumination without the heat or power draw of older incandescent docking lights, and the LEDs stay cool to the touch for added safety around passengers and dock personnel. The 6522SS7 is sold as a matched pair with a stainless steel bezel and white LED output, and measures 1.2 inches high, 4.5 inches wide, and 2.8 inches deep per light. This is a universal fit boat accessory suited to any hull that can accommodate the mounting footprint and wiring pass-through.

Specifications

• Brand: Attwood
• Manufacturer Part Number: 6522SS7
• Bezel Material: Stainless Steel
• Light Color: Cool White LED
• Light Output: 100 Lumens
• Voltage: 12 Volts DC
• Wattage: 5 Watts per light
• Dimensions (per light): 1.2 inches H x 4.5 inches W x 2.8 inches D
• Weight: 1.2 pounds
• Lens Material: Polycarbonate
• Lens Color: Clear
• Quantity: Pair (2 lights)
• Water Resistant: Yes
• UPC: 022697652270

Frequently Asked Questions

What is included with the Attwood 6522SS7? The Attwood 6522SS7 is sold as a matched pair of stainless steel bezel LED docking lights, so two complete lights are included.

What color light do these docking lights produce? Each 6522SS7 light produces a cool white LED output rated at 100 Lumens, designed to cast a broad illumination pattern around the hull rather than a narrow beam.

What are the dimensions of each light? Each Attwood 6522SS7 docking light measures 1.2 inches high, 4.5 inches wide, and 2.8 inches deep.

How much does the pair weigh? The Attwood 6522SS7 pair has a total shipping weight of 1.2 pounds.

What voltage and power do these lights require? The 6522SS7 lights run on a 12 volt DC boat electrical system and each light draws 5 watts of power.

What is the bezel made of? The 6522SS7 uses a stainless steel bezel, chosen for corrosion resistance in marine environments, paired with a clear polycarbonate lens.

Are these lights water resistant? Yes, the Attwood 6522SS7 docking lights are water resistant and built for continuous outdoor marine exposure.

How are the 6522SS7 lights installed? Installation requires only a small hole through the hull for the wiring; the low-profile design mounts directly to the hull out of the way of foot traffic.

Do these run hot like older docking lights? No, the LED design in the Attwood 6522SS7 stays cool to the touch, which is safer for passengers and dock personnel compared to older incandescent docking lights.

Will these fit any boat? The 6522SS7 is a universal fit boat docking light suitable for hulls that can accommodate its mounting footprint and a small wiring pass-through hole.

Is this the genuine Attwood part or an aftermarket copy? The 6522SS7 is the genuine Attwood-manufactured stainless steel bezel LED docking light, not a third-party copy.