Attwood Telescoping Pole Light with ZAMAK Base, 24 Inch, 9-Watt, Fits 911339 Base

The Attwood 7100A7 is a 24 inch telescoping stern pole light built for older-style boats that use a plug-in style base. The pole seats into an Attwood 911339 base, which features a die-cast ZAMAK construction and a locking knob that lets the pole be lowered flush toward the gunwale when not in use, keeping the deck clear while underway or at the dock. Once raised and locked, the light delivers 360 degree, 2 nautical mile visible illumination, meeting the needs of boats up to 65.6 feet (20 meters) in length. The lamp is a 9-watt wedge-base bulb running on a 12-volt system, housed behind a clear polycarbonate lens that resists yellowing and impact better than glass. The base mounts with three countersunk holes sized for number 10 fasteners and extends 3 inches below the deck when installed, so adequate clearance underneath is required for the pole to lower properly. This 24 inch pole (7100A7) is one of three lengths built on the same base and mounting pattern; if a taller pole is needed, the 30 inch version is sold as 7100B7 and the 36 inch version as 7100C7, each a separate part number. The light and its ZAMAK base combine straightforward, no-tool stowing with a durable, corrosion-resistant build suited to regular marine exposure.

Specifications

• Brand: Attwood
• Manufacturer Part Number: 7100A7
• Product Type: Telescoping Pole Light
• Pole Length: 24 inches
• Base Type: Die-cast ZAMAK with locking knob
• Base Part Number: 911339
• Illumination Range: 2 nautical miles, 360 degrees
• Maximum Vessel Length: 65.6 feet (20 meters)
• Bulb: 9-watt wedge-base lamp
• Voltage: 12 volts
• Lens Material: Polycarbonate
• Lens Color: Clear
• Mounting: Three countersunk holes for number 10 fasteners
• Base Clearance Below Deck: 3 inches
• Base Dimensions: 4 inches L x 1 5/8 inches W x 1 3/8 inches diameter
• Weight: 1 pound
• UPC: 022697710031

Fitment

Rated for boats up to 65.6 feet (20 meters) and designed to pair with the Attwood 911339 base. This 24 inch pole (7100A7) mounts using the same base and three-hole, number 10 fastener pattern as the 30 inch (7100B7) and 36 inch (7100C7) versions, so pole length can be matched to the boat without changing the base.

Frequently Asked Questions

What is the pole length of the Attwood 7100A7? The Attwood 7100A7 has a 24 inch pole. The same series is also available in 30 inches (7100B7) and 36 inches (7100C7) if a different height is needed.

What base does the 7100A7 use? It pairs with the Attwood 911339 base, a die-cast ZAMAK base with a locking knob that lets the pole be lowered toward the gunwale when not in use.

How much visibility does this pole light provide? It provides 2 nautical mile, 360 degree illumination, suitable for boats up to 65.6 feet (20 meters) in length.

What bulb does the 7100A7 use? It uses a 9-watt wedge-base lamp running on a 12-volt system.

What is the lens made of? The lens is clear polycarbonate, which resists impact and yellowing better than glass over time in a marine environment.

How is the base mounted to the deck? The base has three countersunk holes sized for number 10 fasteners for a flush-mount installation.

Does this light need clearance below deck? Yes. The 911339 base extends 3 inches below the deck, so adequate clearance underneath is required for the pole to lower into the stowed position.

What are the dimensions of the base? The base used with the 7100A7 measures 4 inches long, 1 5/8 inches wide, and 1 3/8 inches in diameter.

How much does the Attwood 7100A7 weigh? The 7100A7 weighs 1 pound.

Can the pole be removed or lowered when not in use? Yes, the ZAMAK base has a locking knob that allows the pole to be lowered toward the gunwale for stowage, and the pole can be removed from the base entirely.

What is the difference between the 7100A7, 7100B7, and 7100C7? All three use the same ZAMAK base and mounting pattern; the difference is pole length, with the 7100A7 at 24 inches, 7100B7 at 30 inches, and 7100C7 at 36 inches.