Bennett Marine BOLT 24 x 9 Electric Trim Tab Kit, MPN 6BT500135200 - Trailered Boats 22-27 ft

This Bennett Marine BOLT electric trim tab kit (MPN 6BT500135200) is a 24 inch by 9 inch trim tab set built for trailered boats from 22 to 27 feet, including flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. The system is designed for single actuator use per side. Trim tab sizing follows the span x chord convention, where span is the side-to-side measurement (24 inches) and chord is the fore-to-aft measurement (9 inches).

The BOLT system routes wiring through the upper hinge so no wires are exposed to the marine environment, and uses a water-tight black nylon actuator for trouble-free operation. The main seal is positioned high on the actuator to protect against marine growth and water intrusion failures, addressing the common failure points of older electric trim tab designs. Installation is fast because the actuator does not need to be disassembled during the process.

Included in the kit are two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors. A control switch is not included and must be purchased separately. The electric actuators carry a lifetime warranty.

Specifications

• Brand: Bennett Marine
• Manufacturer Part Number: 6BT500135200
• Product Line: BOLT Electric Trim Tab
• Trim Tab Width (Span): 24 inches
• Trim Tab Depth (Chord): 9 inches
• Style: Electric Trim Tabs
• Type: Trim Tab Kit
• Actuator Voltage: 12 volts
• Actuator Model: BEA2000
• Material: Stainless steel trim planes and mounting plates; nylon actuator housing
• Recommended Boat Length: 22 to 27 feet (trailered)
• Recommended Boat Types: Flatboats, center console, dual console, deck boats, bowriders, bass boats, runabouts
• Harness Length: 20 feet and 6 feet
• Weight: 27 pounds
• UPC: 666285600030
• Cross Reference (Yamaha Part Number): 6BT-50013-52-00
• Warranty: Lifetime warranty (electric actuators)

Fitment

Suitable for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts. Best suited for single actuator use and for trailered boats 22 to 27 feet.

Replaces (OEM)

• 6BT-50013-52-00

Frequently Asked Questions

What size are the trim tabs in the Bennett BOLT kit with MPN 6BT500135200? The trim tabs measure 24 inches wide by 9 inches deep. Bennett sizing is listed as span by chord, where span is the side-to-side measurement and chord is the fore-to-aft measurement.

What boats is this Bennett trim tab kit designed for? This 24 x 9 BOLT electric trim tab kit is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is best suited for trailered boats 22 to 27 feet using a single actuator per side.

Is a control switch included with this kit? No. The Bennett BOLT 24 x 9 trim tab kit (MPN 6BT500135200) is sold without a switch, which must be purchased separately.

What comes in the box with this trim tab kit? The kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot wiring harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.

Does this Bennett trim tab kit cross-reference to a Yamaha part number? Yes, this kit corresponds to Yamaha part number 6BT-50013-52-00.

How does the BOLT system compare to older electric trim tab designs? Compared to older electric trim tab technology, the Bennett BOLT system reduces water intrusion and the part malfunctions common to outdated designs, while running quieter than competing systems.

What warranty applies to the actuators in this kit? The BEA2000 electric actuators included with this Bennett BOLT 24 x 9 kit carry a lifetime warranty.

What material are the trim planes made of? The trim planes and mounting plates in this kit are stainless steel, paired with a water-tight black nylon actuator housing.

How much does the Bennett BOLT 24 x 9 trim tab kit weigh? This trim tab kit (MPN 6BT500135200) weighs 27 pounds.

Is this trim tab kit difficult to install? Installation is fast because the actuator does not need to be disassembled during the process.

Can two actuators be synced together with this kit? No. The Bennett BOLT 24 x 9 kit is best suited for single actuator use per side rather than synchronized dual-actuator setups.

What protects this trim tab actuator from water intrusion? The actuator is water-tight black nylon with a high-mounted main seal, and its wiring is routed through the upper hinge so no wires are exposed to the marine environment.