Blue Sea Systems 9012 L-Series Solenoid Switch, 12-24V Ignition Protected

The Blue Sea Systems 9012 is a 12-24V L-Series solenoid switch built for marine electrical systems, providing electronic on-off switching for circuits where a manual battery disconnect is already located elsewhere in the system. Unlike a remote battery switch, the 9012 solenoid has no manual control lever of its own; it is designed to be actuated electrically as part of a larger switching setup, making it a common choice for engine start circuits, battery isolation, and other high-current applications where a compact, panel-mountable switching device is needed.

The 9012 is ignition protected, meeting the safety standards required for use in engine compartments and other areas where spark-producing devices must be certified against igniting surrounding fuel vapors. It operates as a 1-way, normally open, electromechanical on-off switch with two positions and a crimp connector type for wiring. The housing is constructed of plastic with stainless steel contact material, and the switch carries an IP54 rating for protection against dust and splashing water, suiting it to the marine environment. Its compact panel-mount design and moderate current draw make it easy to integrate into existing 12-24V DC electrical panels aboard boats and other vessels.

Specifications

• Brand: Blue Sea Systems
• Manufacturer Part Number: 9012
• Product Name: Solenoid Switch 250A 12-24V
• Category: Boat Battery Switches
• Operating Voltage: 12-24 Volts
• Ignition Protection: Ignition Protected
• Operation Mode: ON-OFF
• Current Rating: 0.13 Amps
• Contact Type: Normally Open
• Contact Material: Stainless Steel
• Connector Type: Crimp
• Switch Type: Electromechanical On-off Switch
• Circuit Type: 1-way
• Number of Positions: 2
• Mounting Type: Panel Mount
• Wattage: 10800 watts
• International Protection Rating: IP54
• Material: Plastic
• Item Dimensions: 7 x 4 x 3 inches
• UPC: 632085090128
• Weight: 1 pound

Frequently Asked Questions

What is the Blue Sea Systems 9012 solenoid switch used for? The 9012 is a 12-24V L-Series solenoid switch used to electronically switch a circuit on and off, typically as part of a battery isolation or engine start circuit where a manual disconnect already exists elsewhere in the system.

Is the 9012 solenoid switch ignition protected? Yes, the Blue Sea Systems 9012 is ignition protected, meaning it is rated for safe use in engine compartments and other areas where spark-producing electrical devices must be certified against igniting fuel vapors.

What voltage does the 9012 solenoid switch operate at? The Blue Sea Systems 9012 operates at 12-24 Volts DC, making it compatible with both standard 12V and 24V marine electrical systems.

What is the difference between a solenoid and a remote battery switch? A solenoid, like the Blue Sea Systems 9012, is an electronic switch with no manual control, intended for circuits where a manual battery disconnect is already provided elsewhere. A remote battery switch, by contrast, is a solenoid or relay paired with a manual control switch that allows switching if the control circuit is compromised or for service lockout.

What are the dimensions of the 9012 solenoid switch? The Blue Sea Systems 9012 measures 7 x 4 x 3 inches.

How much does the 9012 solenoid switch weigh? The Blue Sea Systems 9012 weighs 1 pound.

What material is the 9012 solenoid switch made of? The housing of the Blue Sea Systems 9012 is made of plastic, with stainless steel contact material for the switching contacts.

Is the 9012 solenoid switch water resistant? The Blue Sea Systems 9012 carries an IP54 rating, providing protection against dust ingress and splashing water, which suits it to the marine environment.

How is the 9012 solenoid switch wired? The Blue Sea Systems 9012 uses a crimp connector type for wiring and is configured as a 1-way, normally open circuit with 2 positions.

Can the 9012 solenoid switch be panel mounted? Yes, the Blue Sea Systems 9012 is designed as a panel-mount switch, allowing it to be installed directly into a switch panel or electrical enclosure.

What current rating does the 9012 solenoid switch have? The Blue Sea Systems 9012 has a current rating of 0.13 Amps for its switching contacts.

Does the 9012 solenoid switch have manual on/off control? No, the Blue Sea Systems 9012 is a solenoid-type switch with no manual control lever; it is electronically actuated and intended for use where a manual disconnect is already present elsewhere in the circuit.