Bob's Machine 100-105100 Hydraulic Kick-Back Jac Plate, 6 Inch Setback, Up to 115 HP Outboards

The Bob's Machine 100-105100 Hydraulic Kick-Back Jac Plate is an Action Series jack plate built to let boaters jack up the outboard and idle over shallow obstructions without risking costly lower unit damage. It combines a 6 inch hydraulic stroke with a 1.5 inch built-in structure lift for 7.5 inches of total lift, giving the operator real clearance in skinny water. The Kick-Back design lets the plate give way if it contacts a submerged obstacle while running forward at low speed, then return to position, protecting the motor and lower unit from impact. Delrin rollers and bearings run the sliding and pivoting action, eliminating the chains and springs used on many competing jack plates and keeping operation smooth with minimal maintenance. Integrated locking pins hold the plate in place so it cannot kick out unexpectedly in reverse or while trailering, and greaseable pivot points with tension rods are built in for long-term durability. The plate tilts up to 30 degrees for improved clearance and maneuverability, and a motor tether attachment point is included for added safety. This jack plate is rated for outboard motors up to 115 HP and uses the standard BIA bolt pattern for mounting. It ships ready to install and is backed by Bob's Machine's 5-Year Action Pump Warranty. For clamp-on outboards, it can be paired with Bob's Machine's optional clamp-on style adapter kit, part number 100-105001, sold separately.

Specifications

• Brand: Bob's Machine
• Manufacturer Part Number: 100-105100-NOPC
• Product Category: Jack Plate
• Setback: 6 inches
• Hydraulic Stroke: 6 inches
• Built-In Structure Lift: 1.5 inches
• Total Lift: 7.5 inches
• Tilt Angle: 30 degrees
• Maximum Motor Rating: 115 HP
• Bolt Pattern: BIA standard
• Bearing/Roller Material: Delrin
• Locking System: Integrated locking pins for reverse and trailering
• Pivot Points: Greaseable, with tension rods
• Product Dimensions: 23 x 19 x 12 inches
• Weight: 75 pounds
• UPC: 818377010887
• Warranty: 5-Year Action Pump Warranty
• Compatible Accessory: Optional clamp-on style adapter plate, part number 100-105001

Fitment

The 100-105100-NOPC Hydraulic Kick-Back Jac Plate is rated for outboard motors up to 115 HP and mounts using the standard BIA bolt pattern. Do not use it to encounter obstructions at speeds over 5 MPH, and only while running in the forward direction; it is not designed to encounter obstructions while operating in reverse.

Frequently Asked Questions

What is the total lift on the Bob's Machine 100-105100 Hydraulic Kick-Back Jac Plate? It provides 7.5 inches of total lift, combining a 6 inch hydraulic stroke with a 1.5 inch built-in structure lift.

What horsepower outboards is this jack plate rated for? The 100-105100-NOPC Hydraulic Kick-Back Jac Plate is rated for outboard motors up to 115 HP.

How much does the Bob's Machine 100-105100 jack plate weigh? This jack plate weighs 75 pounds.

Does this jack plate use chains or springs? No. The 100-105100-NOPC uses Delrin rollers and bearings for smooth sliding and pivoting instead of chains or springs, reducing maintenance.

What bolt pattern does the Bob's Machine Hydraulic Kick-Back Jac Plate use? It mounts using the standard BIA bolt pattern.

Can I use this jack plate over submerged obstacles at any speed or in reverse? No. The Kick-Back feature is intended for forward-direction operation at speeds up to 5 MPH; it is not designed to encounter obstructions while operating in reverse.

What keeps the plate from kicking out while trailering? Integrated locking pins on the 100-105100-NOPC hold the plate in position and prevent it from kicking out in reverse or while trailering.

Does the Bob's Machine 100-105100 jack plate need to be greased? Yes, the pivot points are greaseable, and tension rods are included to support long-term durability and performance.

What is the tilt range on this jack plate? The 100-105100-NOPC tilts up to 30 degrees for improved clearance and maneuverability.

Can this jack plate be used with a clamp-on outboard motor? Yes, it can be used with Bob's Machine's optional clamp-on style adapter kit, part number 100-105001, which is sold separately.

What warranty comes with the Bob's Machine 100-105100 Hydraulic Kick-Back Jac Plate? It is backed by a 5-Year Action Pump Warranty.

What are the dimensions of the 100-105100 jack plate? The product measures 23 x 19 x 12 inches.