Dexter 12 Inch x 2 Inch 7K Electric Brake Kit, Right Hand, Nev-R-Adjust, K23-465-00

The Dexter K23-465-00 is a complete 12 inch x 2 inch electric brake assembly rated for 7000 lb (7K) axle capacity, built for the right hand (RH) side of the trailer only. It uses Dexter's Nev-R-Adjust self-adjusting mechanism, which automatically compensates for shoe wear so brake clearance stays correct without periodic manual adjustment. This reduces maintenance time and helps keep braking performance consistent between service intervals.

The kit ships as a full assembly rather than a bare backing plate, so it includes the hardware needed to complete the installation: five hex nuts, two plugs, and an instruction sheet to guide the swap. Because the electric brake magnet and internal components are designed around the 7000 lb capacity rating, this kit is intended for axles matched to that load rating rather than lighter-duty applications.

This is the right hand (RH) specific brake assembly. It is not interchangeable side-to-side; the left hand brake for the opposite side of the axle is a separate part number. Confirm which side of the trailer needs service before ordering so the correct RH unit is installed.

Specifications

• Brand: Dexter
• Manufacturer Part Number: K23-465-00
• Brake Size: 12 inches x 2 inches
• Capacity Rating: 7000 lbs (7K)
• Brake Type: Electric
• Side: Right Hand (RH)
• Adjustment Type: Nev-R-Adjust self-adjusting
• Weight: 14 pounds
• Included Components: Brake assembly, hex nuts (qty 5), plugs (qty 2), instruction sheet

Fitment

Fits 12 inch x 2 inch electric brake axle positions rated for 7000 lb (7K) capacity, right hand (RH) side only.

Replaces (OEM)

No manufacturer cross-reference numbers are listed for this part.

Frequently Asked Questions

What size axle does the Dexter K23-465-00 fit? The K23-465-00 is a 12 inch x 2 inch electric brake assembly built for axle positions rated at 7000 lbs (7K) capacity.

Is this brake kit for the left or right side of the trailer? K23-465-00 is the right hand (RH) brake assembly only; it is not interchangeable with the left hand side, which uses a separate part number.

Does this brake self-adjust as the shoes wear? Yes, the K23-465-00 uses Dexter's Nev-R-Adjust mechanism, which automatically takes up slack as the brake shoes wear so manual adjustment is not required.

What is included in the K23-465-00 kit? The kit includes the complete 12 inch x 2 inch electric brake assembly along with five hex nuts, two plugs, and an instruction sheet for installation.

How much does the K23-465-00 brake assembly weigh? This Dexter electric brake kit weighs 14 pounds.

Can the K23-465-00 be used on a 6000 lb rated axle? No, K23-465-00 is built for the 7000 lb (7K) capacity rating; use a brake kit matched to your axle's specific rated capacity.

Is K23-465-00 a complete brake assembly or just a backing plate? It is a complete 12 inch x 2 inch electric brake assembly, not a bare backing plate, and comes with the mounting hardware and instructions listed in the kit.

What does Nev-R-Adjust mean on this Dexter brake? Nev-R-Adjust is Dexter's self-adjusting brake system used on the K23-465-00, designed to automatically maintain proper shoe-to-drum clearance as the brake wears.

Do I need a separate part for the left hand side of the axle? Yes, K23-465-00 is the right hand (RH) unit only; the left hand side of the trailer requires a different Dexter part number.

Are instructions included with the K23-465-00? Yes, an instruction sheet is included in the K23-465-00 kit along with the brake assembly and mounting hardware.