Dometic Xtreme 4300BC Control Cable Assembly, 11 Feet, CCX43011

The Dometic Xtreme 4300BC Control Cable Assembly (CCX43011) is an 11 foot mechanical control cable built for marine throttle and shift control systems. It is part of the 4300/43 series of Xtreme control cables, which use stainless steel conduit fittings for corrosion resistance and long service life in a marine environment. The 4300 BC cable configuration terminates with one bulkhead fitting and one clamp fitting, and each end carries a 1/4-28 threaded terminal, giving installers a consistent, positive connection point at the helm and at the engine or drive end. The cable is engineered to a 3 inch nominal travel and a 5 inch minimum bend radius, so it can be routed through the tighter curves typical of console and engine compartment installations without kinking or binding the internal core.

This assembly is designed as a direct-fit replacement or upgrade cable for boats using the Xtreme 4300 series control cable system, and it is sized specifically at 11 feet to match runs of that length. Because it shares the same 1/4-28 threaded terminal ends and bulkhead/clamp fitting arrangement as the rest of the 4300 BC lineup, it installs using standard control cable hardware without special adapters. Overall assembly weight is 2.5 pounds, and the boxed product measures 17 x 17 x 1.5 inches.

Specifications

• Brand: Dometic
• Manufacturer Part Number: CCX43011
• Model: Xtreme Control Cable Assembly
• Cable Length: 11 feet
• Conduit Fitting Material: Stainless steel
• Minimum Bend Radius: 5 inches
• Nominal Travel: 3 inches
• Terminal Type: 1/4-28 threaded terminal at each end
• End Fittings: One bulkhead fitting and one clamp fitting
• Weight: 2.5 pounds
• Product Dimensions: 17 x 17 x 1.5 inches
• UPC: 808282273774

Frequently Asked Questions

What length is the Dometic CCX43011 control cable? The CCX43011 is an 11 foot control cable, part of the Dometic Xtreme 4300BC series.

What size terminal ends does this cable use? Each end of the CCX43011 has a 1/4-28 threaded terminal, along with one bulkhead fitting and one clamp fitting, matching the 4300 BC cable configuration.

How much nominal travel does the CCX43011 cable have? 3 inches of nominal travel, which is standard for the Dometic Xtreme 4300/43 series control cables.

What is the minimum bend radius for this cable? 5 inches is the minimum bend radius for the CCX43011, so it should be routed with curves no tighter than that to avoid binding the internal core.

Is the conduit on this cable corrosion resistant? Yes, the CCX43011 uses stainless steel conduit fittings, which is standard across the Dometic Xtreme 4300/43 type cable line.

How much does the CCX43011 control cable weigh? 2.5 pounds is the assembly weight for the CCX43011 control cable.

What are the boxed dimensions of this cable assembly? The CCX43011 ships in packaging measuring 17 x 17 x 1.5 inches.

What is the difference between the 4300 BC cable and the 4300 CC cable? The 4300 BC cable, which includes the CCX43011, terminates with one bulkhead fitting and one clamp fitting at 1/4-28 threaded ends, while the 4300 CC cable (CCX433XX series) instead uses a 1/4-28 threaded terminal and a clamp-type fitting at each end. Both share the same 3 inch nominal travel and 5 inch minimum bend radius.

Does the CCX43011 come as a complete assembly? Yes, the CCX43011 is sold as a complete 11 foot Xtreme 4300BC control cable assembly with both end fittings installed and ready to route and connect.

What model name is associated with CCX43011? CCX43011 is listed under the Xtreme Control Cable Assembly model designation.

Can the CCX43011 be used for either throttle or shift control? The CCX43011 is a mechanical control cable in the Xtreme 4300BC series, built for control applications using 1/4-28 threaded terminal ends with a bulkhead and clamp fitting arrangement.