Dutton-Lainson 17048 Manual Trailer Winch, 1900 lb Capacity, 9-1/2 Inch Offset Handle, 20 Foot Strap

The Dutton-Lainson 17048 is a manual trailer winch built for horizontal pulling applications such as loading a boat trailer, hauling an ATV, or general towing tasks. It is rated to handle loads up to 1,900 lbs and includes a 20 foot by 2 inch polyester strap with a snap hook for secure attachment and load distribution. A 9-1/2 inch offset handle with an ergonomic grip keeps cranking comfortable during extended use, and the reversible ratchet lets the operator wind the strap onto the drum in either direction. When the ratchet pawl is disengaged, the winch freewheels for quick line release. Internally, the winch uses laminated high carbon steel gears that are heat treated for strength, with copper brazed drive shaft gears in a welded, rigid reel construction. Gear ratios are load matched for easier cranking, and the drive shaft bearings are permanently lubricated, so the winch requires no ongoing maintenance. For corrosion resistance in marine environments, the reel and hardware carry a zinc plated TUFFPLATE finish, while the base has a powder coated texture finish over a zinc plate that protects the internal mechanism. Slotted mounting holes on the base allow for quick, straightforward installation. The Dutton-Lainson 17048 is made in the USA.

Specifications

• Brand: Dutton-Lainson
• Manufacturer Part Number: 17048
• Model: DLX1900FC
• Capacity: 1,900 pounds
• Handle: 9-1/2 inch offset handle with ergonomic grip
• Strap Length: 20 feet
• Strap Width: 2 inches
• Strap Type: Polyester with snap hook
• Ratchet Type: Reversible, with freewheel when disengaged
• Gear Material: Laminated high carbon steel, heat treated
• Reel and Hardware Finish: Zinc plated, TUFFPLATE
• Base Finish: Powder coated texture finish over zinc plate
• Bearings: Permanently lubricated drive shaft bearings
• Mounting: Slotted mounting holes
• Weight: 14.28 pounds
• Product Dimensions: 9.5 x 8 x 6 inches
• Country of Origin: Made in USA
• UPC: 085077170481

Frequently Asked Questions

What is the pulling capacity of the Dutton-Lainson 17048 trailer winch? The Dutton-Lainson 17048 manual trailer winch is rated for loads up to 1,900 lbs when used for horizontal pulling.

Can this winch be used for vertical lifting? No, the Dutton-Lainson 17048 is designed exclusively for horizontal pulling applications such as loading a boat trailer, and it is not rated for vertical lifting.

What size handle does the winch have? A 9-1/2 inch offset handle with an ergonomic grip is included on the Dutton-Lainson 17048, sized for comfortable horizontal cranking.

Does the ratchet work in both directions? Yes, the reversible ratchet on the Dutton-Lainson 17048 lets you crank the strap onto the drum in either direction, and it freewheels once the ratchet pawl is disengaged.

What strap comes with the winch? A 20 foot by 2 inch polyester strap with a snap hook ships with the Dutton-Lainson 17048, matched to the winch's 1,900 lb capacity.

What finish protects the winch from rust? Zinc plating with a TUFFPLATE finish covers the reel and hardware on the Dutton-Lainson 17048, while the base has a powder coated texture finish over a zinc plate for corrosion resistance in marine environments.

Is the winch maintenance free? Yes, the drive shaft bearings on the Dutton-Lainson 17048 are permanently lubricated, making it maintenance free under normal use.

What are the winch gears made of? Laminated high carbon steel gears, heat treated for strength, with copper brazed drive shaft gears in a welded, rigid reel construction.

How is the Dutton-Lainson 17048 mounted? Slotted mounting holes on the base allow for quick and easy installation.

Where is this trailer winch manufactured? The Dutton-Lainson 17048 manual trailer winch is made in the USA.

How much does the winch weigh? The Dutton-Lainson 17048 weighs 14.28 pounds.

What are the overall dimensions of the winch? The Dutton-Lainson 17048 measures 9.5 x 8 x 6 inches.