Evercoat Gelcoat Repair Kit 108000, 1 oz Polyester Gel Coat Paste for Fiberglass Hull and Deck Repair

The Evercoat Gelcoat Repair Kit permanently repairs the nicks, gouges, and scratches that inevitably show up on fiberglass hulls and decks. Built around a polyester gelcoat paste, the kit cures to a durable, glass-hard finish within one hour, so repairs hold up to the same wear and weather as the surrounding gelcoat. Six color pigments are included so you can blend the paste directly on the hull or deck to achieve a close match to almost any existing gelcoat color, rather than being limited to a single pre-mixed shade.

A special release film paired with a no-run polyester gel keeps the repair slick while it cures, which means no sanding is needed to get a smooth, finished surface. The complete kit contains everything needed to carry out a repair: polyester gel coat paste, liquid hardener, the six color agents, release film, a mixing stick, sandpaper, and an instruction sheet with a color-matching guide, so there is nothing extra to buy for a typical small repair.

Beyond boats, this same repair kit can be used on other fiberglass and gelcoat surfaces such as countertops, appliances, bathroom tubs, and sinks. Note that this kit ships ground only to the contiguous 48 states.

Specifications

• Brand: Evercoat
• Manufacturer Part Number: 108000
• Gel Coat Paste Volume: 1 fluid ounce
• Color: Red Metallic
• Finish: Glossy, no-sand finish
• Cure Time: Cures glass-hard within one hour
• Kit Includes: Polyester gel coat paste, liquid hardener, 6 color agents, 2 special release films, mixing sticks, sandpaper (4.5 in x 5.5 in), instruction sheet with color matching guide
• Weight: 0.3 pounds
• Package Dimensions: 5.08 cm L x 13.97 cm W x 16.51 cm H
• UPC: 023289080006
• Shipping Restriction: Ground shipping only, contiguous 48 states

Frequently Asked Questions

What is the Evercoat Gelcoat Repair Kit used for? This kit permanently repairs nicks, gouges, and scratches in fiberglass hulls and decks using a polyester gelcoat paste that cures to a glass-hard finish.

Can I match this repair kit to my boat's existing gelcoat color? Yes, the kit includes 6 color pigments that can be blended directly against the hull or deck to achieve a close match to almost any gelcoat color.

How long does the Evercoat Gelcoat Repair Kit take to cure? The polyester gelcoat paste in this kit cures glass-hard within one hour.

What is included in the Evercoat Gelcoat Repair Kit box? The kit (part number 108000) includes polyester gel coat paste, liquid hardener, 6 color agents, 2 special release films, mixing sticks, sandpaper, and an instruction sheet with a color matching guide.

How much gel coat paste comes in this kit? This Evercoat kit includes 1 fluid ounce of polyester gel coat paste along with the hardener and color agents needed to mix a repair.

Is sanding required after using this gelcoat repair kit? No, the special release film and no-run polyester gel produce a slick, no-sand finish once cured.

Can this kit be used on anything other than a boat? Yes, in addition to fiberglass hulls and decks, this gelcoat repair kit can also be used to repair countertops, appliances, bathroom tubs, and sinks.

What color is the gel coat paste in this kit? The base gel coat paste in the Evercoat Gelcoat Repair Kit is a red metallic color, which is then blended with the included color agents for a closer match.

Do I need to buy extra materials to complete a repair? No, this kit is complete on its own, supplying the gel coat paste, hardener, color agents, release film, mixing stick, sandpaper, and instructions needed for a typical repair.

What is the manufacturer part number for this repair kit? The Evercoat Gelcoat Repair Kit carries manufacturer part number 108000.

How is the Evercoat Gelcoat Repair Kit shipped? This kit (part 108000) ships ground only, and only to the contiguous 48 states.

How much does the Evercoat Gelcoat Repair Kit weigh? The Evercoat Gelcoat Repair Kit weighs 0.3 pounds.