Garelick 19535 Outboard Swim Platform with Fold Down Ladder, Gray HDPE, Stainless Rails

The Garelick 19535 Outboard Swim Platform with Fold Down Ladder is built for outboard-powered boats, giving boarders a stable, durable platform at the transom along with a fold-down ladder for climbing out of the water. The platform is made of durable HDPE (high-density polyethylene) in gray, which resists weathering and is easy to clean after a day on the water. It mounts at a 10 degree angle on the transom for use on outboard transoms specifically, keeping the platform clear of the motor's swing range once the correct mounting side is selected.

The platform includes one stainless steel wrap around rail and one stainless steel underside support rail, both 1 inch in diameter, and both reversible so the handrail can be installed on whichever side of the platform best clears the outboard's full turning extension. All mounting hardware is stainless steel. The platform is pre-drilled for straightforward assembly, and Garelick provides documented assembly and installation instructions covering strut mounting, transom-side selection, drilling, and use of a marine grade adhesive/caulking compound at the mounting points. Garelick recommends a backing plate on transoms under 2 inches thick, made of aluminum, marine plywood, or another non-compressive material.

Specifications

• Brand: Garelick
• Manufacturer Part Number: 19535
• Product Type: Outboard swim platform with fold down ladder
• Platform Material: HDPE (high-density polyethylene)
• Color: Gray
• Rail Material: Stainless steel
• Rail Diameter: 1 inch (3 cm)
• Rail Configuration: One wrap around rail, one underside support rail, reversible
• Hardware: Stainless steel
• Mounting Angle: 10 degrees on transom
• Product Dimensions: 5.75 inches wide x 19.25 inches high
• Maximum Height: 19.25 inches
• Weight: 16 pounds
• Included Components: Outboard swim platform, 1-step fold down ladder
• Fasteners: Not included (mounting fasteners must be selected separately)

Fitment

Designed for use on outboard transoms only. Fasteners are not included, so choose fasteners suitable for your transom material and thickness. If the transom is less than 2 inches thick, Garelick recommends installing a backing plate of aluminum, marine plywood, or other non-compressive material on the inside of the transom.

Frequently Asked Questions

What boats is the Garelick 19535 swim platform designed for? The Garelick 19535 is designed for use on outboard transoms and mounts at a 10 degree angle on the transom.

Does the 19535 include a ladder? Yes, the Garelick 19535 includes a 1-step fold down ladder along with the swim platform.

What is the platform made of? The platform on the Garelick 19535 is made of durable HDPE (high-density polyethylene) in gray, which is easy to clean and resists weathering.

Are the rails stainless steel? Yes, the Garelick 19535 includes one stainless steel wrap around rail and one stainless steel underside support rail, both 1 inch in diameter.

Can the handrail be mounted on either side of the platform? Yes, both rails on the Garelick 19535 are reversible, so the handrail can be installed on whichever side of the platform is most suitable once the transom mounting side is chosen.

Are mounting fasteners included with the 19535? No, fasteners are not included with the Garelick 19535 and must be selected to suit the transom material and thickness.

Do I need a backing plate to install this platform? If the transom is less than 2 inches thick, Garelick recommends installing a backing plate made of aluminum, marine plywood, or another non-compressive material on the inside of the transom before mounting the 19535.

How much does the Garelick 19535 weigh? The Garelick 19535 outboard swim platform weighs 16 pounds.

What are the dimensions of the platform assembly? The Garelick 19535 measures 5.75 inches wide by 19.25 inches high, with a maximum height of 19.25 inches.

Is the hardware stainless steel? Yes, all mounting hardware supplied with the Garelick 19535 is stainless steel.

Does the 19535 work with inboard/outboard (I/O) drives? No, the Garelick 19535 is built for use on outboard transoms; Garelick offers a separate I/O swim platform for inboard/outboard applications.

How is the platform maintained after installation? Garelick recommends periodically checking and re-tightening the mounting hardware on the 19535 due to normal boat operation, along with regular fresh water rinsing and periodic cleaning with a mild abrasive cleaner to retain luster and help prevent corrosion.