Garelick 19537 Transom Platform with Telescoping Ladder, 18 Inch x 15.5 Inch HDPE Platform

The Garelick 19537 Transom Platform with Telescoping Ladder is a boarding platform and 2-step ladder combination designed to mount directly to a boat transom. The platform is molded from durable, high-density polyethylene (HDPE) and comes pre-drilled to simplify assembly, measuring 18 inches wide by 15.5 inches deep by 0.75 inches thick. It mounts at a 10 degree angle on the transom for a secure, water-shedding fit.

A stainless steel wraparound handrail and a stainless steel underside support rail are included, each 1 inch in diameter, and both are reversible so the handrail can be positioned on whichever side of the platform suits the boat layout best. Overall height with the rail installed is 5 inches and overall width is 13.5 inches, with the rail standing 12.5 inches above the platform surface.

The attached 2-step telescoping ladder deploys to 22.75 inches in length and telescopes down for use, then slides up and over the platform for compact stowage at 17 inches. The ladder steps use flat poly treads for secure, comfortable footing when boarding from the water. Mounting hardware for the rails is included; transom fasteners are not included, and a backing plate is recommended if the transom is less than 2 inches thick.

Specifications

• Brand: Garelick
• Manufacturer Part Number: 19537
• Platform Dimensions: 18 inches wide x 15.5 inches deep x 0.75 inches thick
• Height Above Platform: 12.5 inches
• Number of Ladder Steps: 2
• Ladder Length Deployed: 22.75 inches
• Ladder Length Stowed: 17 inches
• Overall Height: 5 inches
• Overall Width: 13.5 inches
• Mounting Angle: 10 degrees
• Rail Diameter: 1 inch
• Rail Material: Stainless steel, reversible mounting
• Platform Material: High-density polyethylene (HDPE)
• Tread Material: Flat poly treads
• Weight: 16.35 pounds
• UPC: 038203195377

Fitment

Mounts directly to a boat transom at a 10 degree angle; suitable for boats with a transom that can accept the platform's rail and strut mounting hardware.

Replaces (OEM)

No OEM cross-reference numbers are specified for this part.

Frequently Asked Questions

What is included with the Garelick 19537 transom platform? The Garelick 19537 ships with the HDPE boarding platform, a stainless steel wraparound handrail, a stainless steel underside support rail, the attached 2-step telescoping ladder, and the mounting hardware for the rails; transom fasteners for mounting to the boat are not included.

How large is the platform on the Garelick 19537? The boarding platform measures 18 inches wide by 15.5 inches deep by 0.75 inches thick, with the assembled unit standing 5 inches overall in height and 13.5 inches overall in width once the handrail is installed.

Can the handrail be mounted on either side of the platform? Yes, the stainless steel handrail on the Garelick 19537 is reversible, so it can be installed on whichever side of the platform best suits the boat's layout and outboard clearance.

What angle does the platform mount at on the transom? The Garelick 19537 mounts at a 10 degree angle on the transom, which is the angle specified for correct installation and drainage.

How far does the telescoping ladder extend? The 2-step telescoping ladder on the 19537 deploys to a length of 22.75 inches for boarding and telescopes down to a stowed length of 17 inches when not in use.

How does the ladder stow when not in use? On the Garelick 19537, the telescoping ladder slides up and over the platform for compact stowage, keeping it out of the way while underway.

What material is the platform made from? The Garelick 19537 platform is molded from durable, high-density polyethylene (HDPE), chosen to withstand marine conditions, with flat poly treads on the ladder steps for secure footing.

Is a backing plate needed to install this platform? If the boat's transom is less than 2 inches thick, Garelick recommends adding a backing plate of aluminum, marine plywood, or a similar non-compressive material on the inside of the transom before mounting the 19537.

Does the Garelick 19537 come pre-drilled for assembly? Yes, the HDPE platform is pre-drilled at the factory to simplify attaching the handrail and support rail during assembly.

What is the weight of this transom platform? The Garelick 19537 transom platform with telescoping ladder weighs 16.35 pounds.

Are mounting fasteners for the transom included? The 19537 includes hardware to attach the handrail and support rail to the platform, but fasteners for securing the unit to the transom itself are not included and should be selected based on the transom material.

How is the platform maintained after installation? Garelick recommends periodically checking and re-tightening the mounting hardware on the 19537 due to normal boat operation, along with regular fresh water rinsing and occasional cleaning with a mild abrasive cleaner to retain luster and help prevent corrosion.