Guest 2713A ChargePro 15 Amp 3-Bank On-Board Battery Charger, 12V DC / 120V AC

The Guest 2713A ChargePro is an on-board marine battery charger built to charge three 12 volt batteries at once, with each bank independently sensed so a battery that finishes charging first is not overcharged while the others continue topping off. Rated at 15 amps of output, the charger runs from a standard 120 volt AC shore power connection and is designed for both flooded lead acid and AGM lead acid 12 volt batteries, making it suitable for charging a house bank, engine start battery, and accessory battery from a single unit. The housing carries an IP67 waterproof rating, letting it withstand the moisture and spray typical of a marine engine compartment or below-deck installation, and the construction is shock resistant to handle vibration while underway. Electrical protection is built in throughout, including reverse polarity protection, over-current protection, over-voltage protection, and over-temperature protection, along with in-line fuses that guard both the charger and the connected batteries. The unit is ignition protected for safe installation near gasoline engines. Output connects via marine battery clamps or ring connectors, and the charger measures 2.4 inches deep by 12.9 inches wide by 7.5 inches high in a gray and blue housing. Boat owners replacing a failed multi-bank charger or upgrading from a single-bank unit can use the Guest 2713A to keep an entire battery bank maintained automatically whenever shore power is connected.

Specifications

• Brand: Guest
• Manufacturer Part Number: 2713A
• Output Configuration: 3 bank, independently sensed
• Current Rating: 15 amps
• Output Voltage: 12 volts DC
• Input Voltage: 120 volts AC
• Battery Compatibility: 12 volt flooded lead acid and AGM lead acid batteries
• Ingress Protection: IP67 waterproof housing
• Connector Type: Marine battery clamps / ring connectors
• Product Dimensions: 2.4 inches D x 12.9 inches W x 7.5 inches H
• Weight: 8 pounds
• Color: Gray / Blue
• UPC: 046904904129

Frequently Asked Questions

How many batteries can the Guest 2713A charge at once? The Guest 2713A charges three 12 volt batteries at the same time, with each of the three banks independently sensed so one battery does not affect the charge state of another.

What is the output current of the Guest 2713A? It is rated at 15 amps of output, distributed across its three independent charging banks.

Will the Guest 2713A work with AGM batteries? Yes, the 2713A is designed for both 12 volt flooded lead acid and 12 volt AGM lead acid batteries.

What input power does this charger need? The Guest 2713A runs on 120 volt AC input, the standard voltage supplied by shore power or an onboard AC outlet.

Is the Guest 2713A safe to mount near a gasoline engine? Yes, the charger is ignition protected, which allows it to be installed near gasoline engines and in enclosed engine compartments.

How is the Guest 2713A protected from moisture? It has an IP67 waterproof housing, letting the 2713A withstand splashing water and the humid conditions common in marine installations.

What size is the Guest 2713A charger? The unit measures 2.4 inches deep by 12.9 inches wide by 7.5 inches high.

How much does the Guest 2713A weigh? The charger weighs 8 pounds.

What electrical safety features does the 2713A include? The Guest 2713A includes reverse polarity protection, over-current protection, over-voltage protection, over-temperature protection, and in-line fuses to protect the charger and the connected batteries.

What type of connectors does the Guest 2713A use to connect to batteries? Output connections are made using marine battery clamps or ring connectors.

What color is the Guest 2713A housing? The 2713A charger housing is gray and blue.

Can the Guest 2713A be used for a boat with a house bank, start battery, and accessory battery? Yes, because it has three independently sensed banks, the 2713A can maintain a house bank, an engine start battery, and an accessory battery simultaneously from one charger.